Middle of its segment, short guarantee
The HELOC PRO GS10-M144-BF series from Goldi Solar is a bifacial photovoltaic module built for installations where getting the most out of every square meter of roof or ground space really matters. The panel stands out with bifacial technology - the rear side of the cells captures light reflected off the surface beneath the array, allowing ground-mount systems and flat roofs with light-colored surfaces to gain real additional energy output without expanding the mounting area. The monocrystalline PERC cells used in a half-cut layout reduce resistive losses and improve resilience to partial shading, which matters both on roofs with chimneys or skylights and in large-scale PV plants exposed to variable irradiance. Multi-busbar technology increases mechanical durability, lowering the risk of microcracks that can occur during transport and operation, while the glass-glass construction improves resistance to moisture and weathering. Textured cell and glass surfaces help the module maintain stable output even on overcast days. The HELOC PRO series suits investors looking for a combination of long service life, a solid warranty (12 years on the product, 25 years on power output), and lower cost of energy in terms of LCOE, fitting both commercial projects and larger residential systems.
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Owners who want a long output guarantee.
Bottom 22% of the PERC 500-550 W segment, against a median of 30 yrs.
Goldi Solar is listed as a Tier-1 manufacturer by BloombergNEF, confirming modules have been used in at least six projects financed by different non-recourse banks over the past two years. This is a key advantage for bank financing of commercial installations and utility-scale PV farms.
The rear side of the cells captures light reflected from the ground, enabling ground-mounted and light-colored flat-roof installations to realistically achieve 5% to 15% additional energy yield without increasing the mounting footprint.
12 years of product warranty and 25 years of power warranty is a standard comparable to peer offerings such as DMEGC (GHxxxM10T-B66HST), giving investors predictable LCOE over the long-term operating horizon.
PERC half-cut cells reduce resistive losses and improve shade tolerance, while multi-busbar technology lowers the risk of microcracks during transport and operation.
The double-glass encapsulation increases resistance to moisture and weather factors, supporting long-term production stability in commercial installations and larger residential systems.
Efficiency of 20.91% trails competing 540 Wp modules in the same segment - Gokin GK-5-60HG (24.4%) and Horay Solar HS 199R-120 TC-D Delta (23.1%) - and matches only DMEGC's GHxxxM10T-B66HST (20.9%), indicating an older PERC-generation technology relative to competitors using newer cell architectures.
The series is built on PERC cells dating from 2021, while comparable peers (e.g., Horay Solar) achieve higher efficiency with newer cell architectures. This may translate into higher LID degradation and lower high-temperature yield relative to N-type modules.
- Efficiency of 20.9% matches the PERC 500-550W median
- At 209.1 W/m² power density, roof space requirements are typical for PERC 500-550W panels
- Temperature coefficient of -0.35%/°C matches the PERC 500-550W median
- In the top 72% for efficiency among all PERC panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2543 panels of the same or similar size to this one, within ±100 mm. See them here
About the HELOC PRO GS10-M144-BF series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.