Skip to main content
Gintech Brand review

GIN P6F-60-260W

260 Wp Polycrystalline
ComparePV verdict

Middle of its segment, weak in heat

Rank 13,700 of 14,005
Compare panels Datasheet PDF
Power (Wp)
260
Weak · bottom 23%
Efficiency (%)
15.80
Weak · bottom 16%
Density (Wp/m²)
159.8
Weak · bottom 19%
Temp (%/°C)
-0.410
Weak · bottom 13%
Weight (kg)
18.5
Weak · bottom 24%
Warranty (yrs)
25
Typical · median 25 yrs

The GIN P6F-60 series is a polycrystalline module consisting of 60 156x156 mm cells, designed for installations requiring reliability in harsh weather conditions. A positive power tolerance of 0~+5W ensures that each panel delivers at least the declared power - never less, which translates into significantly higher energy yields over the entire lifespan. The module stands out with its exceptional mechanical strength - it can withstand snow loads up to 5400 Pa and wind pressure up to 2400 Pa, making it an ideal choice for roof-mounted installations in the Polish climate. Certifications for salt corrosion (IEC-61701) and ammonia corrosion (IEC-62716) make the series suitable for both coastal areas and locations near agricultural or industrial facilities. An integrated PID (Potential Induced Degradation) protection stabilizes the module's parameters for decades of use. Good performance under diffuse light means efficient energy generation, even on cloudy mornings typical of Polish autumn and winter. Each unit undergoes mandatory double EL inspection to eliminate defects at the cell level. The series is covered by a 25-year linear power warranty and a 10-year product warranty.

Ranking

1,015 panels in the 160-360 W band, all technologies
Metric This panel Median Position in segment Overall rank
Module efficiency 15.80% 17.70% Weak · bottom 16% 13,676
Power density 159.8 176.4 Weak · bottom 19% 13,631
Temperature coefficient -0.410 -0.360 Weak · bottom 13% 13,738
Weight per kWp 71.2 64.4 Weak · bottom 24% 13,459
Performance warranty 25 yrs 25 yrs Typical 9,798
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 6 caution
Best for

Residential, commercial and cold-climate.

Not ideal for

Hot climates, tight roof space and roofs where every square metre has to count.

Watch-outs
-0.410 %/°C temperature coefficient

Bottom 13% of the 160-360 W band, against a median of -0.360.

15.80% module efficiency

Bottom 16% of the 160-360 W band, against a median of 17.70%.

159.8 watts per square metre

Bottom 19% of the 160-360 W band, against a median of 176.4.

What owners get
Positive power tolerance 0~+5W

Every module in the GIN P6F-60 series delivers at least its nameplate power — never less. For a 10-panel string of 280 Wp modules, this translates to up to 50 W of additional real output compared to the rated nameplate, improving LCOE over the entire service life.

High mechanical load resistance

The panel is rated for snow loads up to 5,400 Pa and wind pressure up to 2,400 Pa — exceeding the common market baseline of 3,000/2,400 Pa. For high-snow Polish climate zones (Podkarpacie, Suwałki region), this is a tangible advantage over lighter-certified polycrystalline competitors.

Dual corrosion certification (IEC-61701 + IEC-62716)

Certification for both salt-mist corrosion (IEC-61701) and ammonia corrosion (IEC-62716) enables deployment in coastal zones as well as near livestock farms and industrial facilities — environments where uncertified modules show accelerated degradation of frames and junction boxes.

Anti-PID protection

Built-in resistance to Potential Induced Degradation prevents power loss caused by leakage currents through the glass and encapsulant. This is particularly relevant for transformerless string inverter systems — the dominant topology in residential prosumer installations — where PID risk is inherently higher.

25-year linear power warranty + 10-year product warranty

The series carries a 25-year linear power warranty alongside a 10-year product warranty — meeting the Tier-1 market minimum. Warranty obligations are honored by United Renewable Energy (URE), the successor entity formed when Gintech merged with Neo Solar Power and Solartech Energy in 2018.

Trade-offs
Series discontinued since 2018

In 2018, Gintech Energy merged with Neo Solar Power and Solartech Energy to form United Renewable Energy (URE). The GIN P6F-60 series is no longer manufactured; new-old-stock availability is extremely limited and replacement components (glass, junction box, frame) may be difficult to source for warranty repairs beyond 2025.

Max efficiency 17% — below direct peers

The top variant achieves 17% module efficiency, while comparable 60-cell peer products outperform it: TPL P-60 Series at 17.1%, Rarlon PV Tech Polycrystalline at 17.21%, and Techwise Solar Micro Sun at 21.12%. On space-constrained rooftops this translates to measurably lower energy yield per m².

Outdated polycrystalline BSF cell technology

Polycrystalline BSF technology on 156×156 mm cells has been superseded by mono PERC and N-type TOPCon, which deliver 20–22% module efficiency at the same footprint. Virtually all leading manufacturers (LONGi, Jinko, Trina) ceased polycrystalline production before 2022.

Notes from the database
  • Module efficiency of 15.8% is 6.0pp below average for database panels (median: 21.8%)
  • 159.8 W/m² power density is 58.3 W/m² below database median (218.1 W/m²) - requires larger installation area
  • At -0.41%/°C, loses 0.11pp more power per degree than database median (-0.30%/°C)
  • 18.5 kg weight - 8.0 kg lighter than database median (26.5 kg), reducing installation effort
  • Ranked #13676 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 260 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 15.80 % Weak Segment median 17.70%
Vmpp · Impp 30.50 V · 8.52 A Operating point at max power
Voc · Isc 37.80 V · 9.06 A Sizes the string length
Max system voltage 1000 V Longer strings than 1000 V modules
Dimensions 1640×992×40 mm · 1.63 m² of roof
Weight 18.5 kg Weak Weak · bottom 24%
Cells 60 Polycrystalline
Coefficient Pmax -0.410 %/°C Weak bottom 13% of its segment
Coefficient Voc · Isc -0.320 · 0.040 %/°C
NOCT 44 °C At 800 W/m², 20 °C ambient
Product warranty 10 years Hardware defects only
Performance warranty 25 years Typical median 25 yrs · median 25 yrs
End-of-warranty output 80.0 % Equals 198 W guaranteed

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.410 %/°C against a segment median of -0.360
-

Alternatives

All Gintech panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Gintech GIN P6F-60-260W 260 W 15.80% -0.410 18.5 kg You are here
CS3K-310P-AG 310 W 18.70% -0.360 22.5 kg +50 W, +2.9 pp, +5 yr warranty
RL310HP-120 310 W 18.60% -0.390 18.5 kg +50 W, cooler, +2.8 pp
CS3K-310PB-AG 310 W 18.40% -0.360 22.3 kg +50 W, +2.6 pp, +5 yr warranty
CS3K-305P-AG 305 W 18.40% -0.360 22.5 kg Cooler, +2.6 pp, +5 yr warranty
LNSK-310P 310 W 18.31% -0.360 21.0 kg +50 W, cooler, +2.5 pp
RL305HP-120 305 W 18.30% -0.390 18.5 kg +45 W, cooler, +2.5 pp
WS-295 295 W 18.17% -0.386 18.5 kg +35 W, cooler, +2.4 pp
CS3K-305PB-AG 305 W 18.10% -0.360 22.3 kg Cooler, +2.3 pp, +5 yr warranty
GIN P6F-60-255W 255 W 15.50% -0.410 18.5 kg -0.3 pp
GIN P6F-60-265W 265 W 16.10% -0.410 18.5 kg +0.3 pp
GIN P6F-60-270W 270 W 16.40% -0.410 18.5 kg +10 W, +0.6 pp
GIN P6F-60-275W 275 W 16.70% -0.410 18.5 kg +15 W, +0.9 pp
GIN P6F-60-280W 280 W 17.00% -0.410 18.5 kg +20 W, +1.2 pp
SPR-MAX3-400-COM 400 W 22.60% -0.270 19.0 kg +140 W, +6.8 pp, +15 yr warranty
LEPV 400 400 W 22.31% -0.290 20.0 kg +140 W, cooler, +6.5 pp
NS-360MH-60 360 W 22.12% -0.290 17.0 kg +100 W, cooler, +6.3 pp

Found 182 panels of the same or similar size to this one, within ±10 mm. See them here Found 218 panels of the same or similar size to this one, within ±25 mm. See them here Found 379 panels of the same or similar size to this one, within ±50 mm. See them here Found 472 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Gintech GIN P6F-60 come with?
The GIN P6F-60 series comes with a 10-year product warranty covering materials and workmanship, plus a 25-year linear power output warranty. The linear power warranty guarantees a steady, predictable degradation rate over the full 25-year period, making it straightforward to forecast energy yields across the system's entire operating lifetime.
What snow and wind loads can the Gintech GIN P6F-60 handle?
The GIN P6F-60 module is rated for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. A 5,400 Pa snow load corresponds to more than 500 kg of snow per square meter, which comfortably covers winter conditions across most of Central Europe, including foothill and mountainous regions.
What is PID and does the GIN P6F-60 series have protection against it?
PID (Potential Induced Degradation) is a gradual power loss caused by leakage currents flowing through the module's frame and glass at high DC voltages. The GIN P6F-60 series features built-in PID protection that stabilizes the module's electrical parameters over decades of operation — particularly important in larger systems with long MPPT strings running at elevated voltages.
Is the GIN P6F-60 suitable for coastal or agricultural locations?
Yes. The GIN P6F-60 holds IEC-61701 salt spray corrosion certification and IEC-62716 ammonia corrosion certification. This makes the series fully suitable for installations near coastlines exposed to salty air, as well as sites adjacent to livestock barns, poultry farms, or industrial facilities where ammonia vapor concentrations are elevated.
Do Gintech GIN P6F-60 panels generate power on overcast days?
Yes. The GIN P6F-60 series offers good low-light performance, meaning the modules generate electricity effectively on cloudy mornings and overcast days typical of Central European autumns and winters. They maintain reasonable efficiency at low irradiance levels, limiting energy losses during prolonged periods of diffuse light.
What does the 0~+5W positive power tolerance mean for the GIN P6F-60, and why does it matter?
The 0~+5W positive power tolerance guarantees that every GIN P6F-60 panel delivers at least its rated 280 Wp — and often slightly more, never less. The system will never be undersized due to factory tolerances. Over a 25-year operating period, this consistently results in higher real-world energy yields compared to modules shipped with symmetric or negative LCOE-impacting tolerances.
Add to compare