Skip to main content
Anern Energy ANM-ND580W

ANM-ND580W

580 Wp N-type Bifacial 80%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 4,564 of 14,005
Compare panels Datasheet PDF
Power (Wp)
580
Typical for its class
Efficiency (%)
22.45
Typical · median 22.45%
Density (Wp/m²)
224.5
Typical · median 224.5
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.0
Weak · 2.5 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The Anern Energy N-type 560-580 Watt Bifacial Module with Dual Glass is a series of modules designed to maximize energy production in installations where every square meter counts. Thanks to the dual-glass construction, the panel gains higher resistance to moisture, micro-cracks, and material fatigue, resulting in more stable performance over the long term. The use of bifacial technology allows for the utilization of reflected light from the ground - a significant advantage, especially on bright roofs, membranes, gravel, and in ground-mounted installations.

The heart of this series is the N-type solar cells, which offer better resistance to degradation and higher parameter repeatability over time, supported by half-cut solutions that improve performance in partially shaded conditions. Another key feature is SMBB, a multi-busbar architecture that reduces losses and improves current collection.

This is a good choice for PV farms, large industrial rooftops, and projects where reliability, durability, and better performance in less-than-ideal conditions are priorities.

Ranking

259 panels in the segment N-type 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.45% 22.45% Typical 4,620
Power density 224.5 224.5 Typical 4,547
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 55.2 52.3 Weak · bottom 22% 9,588
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Commercial, utility-scale and shaded-installations.

Not ideal for

Weight-limited structures.

Watch-outs
55.2 kg per kWp

Bottom 22% of the N-type 550-600 W segment, against a median of 52.3.

What owners get
N-type with low temperature coefficient

N-type cells exhibit a temperature coefficient of approximately -0.30%/°C (compared to approximately -0.35%/°C for standard P-type PERC cells), and virtually zero LID (Light-Induced Degradation), which translates directly into higher energy yield on hot days and more stable power output throughout the entire operating lifespan.

Performance up to 22.45% – at the top of the segment

The upper performance limit of 22.45% is identical to the results of comparable products from Emmvee Titanium Duo and Titanium Clear (22.45%), and is practically equivalent to ZNShine ZXM7-UHLD144 (22.44%). This means that the product series technically does not lag behind the competition in this power class.

Bifacial dual-pane glass – durability and additional gain

The dual-layer construction eliminates the risks associated with backsheet films (delamination, UV yellowing, and moisture permeability), while the bifacial technology allows for the recovery of an additional 11-23% of energy from reflected radiation – which is particularly important in ground-mounted and brighter roof-mounted installations.

30-year power guarantee ≥87.4%

The manufacturer claims to maintain at least 87.4% of its initial power output after 30 years of operation. In comparison, many mid-tier manufacturers offer 25-year warranties with a drop to 84.8%, making this series stand out for its long-term investment protection.

SMBB + half-cut – improved performance in shaded conditions

Multi-bus architecture (SMBB) shortens the current path and reduces resistive losses, while the half-cut technology divides the cells in half, limiting the impact of partial shading on the entire panel. When combined, they provide a significantly higher yield in suboptimal conditions (urban environments, roofs with chimneys).

Trade-offs
Not BNEF Tier 1 status

Anern Energy is not listed on the BNEF Tier 1 Solar Module Manufacturers list (the methodology, as of March 2026, requires supplying at least six projects ≥10 MW financed without recourse by six different banks). A comparable company, ZNShine, holds Tier 1 status, which may be a necessary condition for the acceptance of its modules in projects funded by banks.

Limited brand recognition within the PV (photovoltaic) segment.

Anern primarily positions itself as a provider of integrated B2B solutions (solar lamps, inverters, off-grid power systems) – high-power PV modules are a supplementary product, not the flagship offering. This may result in a weaker technical support network and limited service availability in Poland compared to manufacturers that focus solely on modules.

Notes from the database
  • Efficiency of 22.4% matches the N-type 550-600W median
  • Power density of 224.5 W/m² matches the N-type 550-600W median
  • At -0.29%/°C, hot weather performance is typical for N-type 550-600W panels
  • At 32.0 kg, this panel is 2.5 kg heavier than the N-type 550-600W median (29.5 kg) - more demanding for installation crews
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 580 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.45 % Typical Segment median 22.45%
Vmpp · Impp 42.59 V · 13.62 A Operating point at max power
Voc · Isc 51.47 V · 14.37 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 32.0 kg Weak Weak · 2.5 kg above median
Cells 144 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 507 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Anern Energy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 580 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Anern Energy ANM-ND580W 580 W 22.45% -0.290 32.0 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.4 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +2.2 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +50 W, cooler, +1.9 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg -30 W, 16 kg lighter, +1.9 pp
JAT60S40-540/LR 540 W 24.40% -0.260 23.5 kg -40 W, lighter, +1.9 pp
ANM-ND560W 560 W 21.68% -0.290 32.0 kg -20 W, -0.8 pp
ANM-ND565W 565 W 21.87% -0.290 32.0 kg -15 W, -0.6 pp
ANM-ND570W 570 W 22.07% -0.290 32.0 kg -10 W, -0.4 pp
ANM-ND575W 575 W 22.26% -0.290 32.0 kg Very close match
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +70 W, lighter, +2.8 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +65 W, lighter, +2.6 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +60 W, lighter, +2.4 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +55 W, lighter, +2.2 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty is offered on the Anern Energy N-type 560–580W Bifacial Dual Glass series?
The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. The annual degradation rate of N-type cells is just 0.40%, meaning that after 30 years of operation the modules retain a significantly higher percentage of their rated power compared to older P-type technology. This represents one of the best linear power warranties available in the large-scale panel segment.
What advantages does the dual glass construction offer in the Anern Energy 560–580W series?
Replacing the traditional backsheet with a second pane of tempered glass eliminates the primary causes of module degradation: moisture ingress, micro-cracking, and delamination. The dual glass construction extends the practical service life of the panel beyond 30 years and is particularly recommended for installations exposed to high humidity, harsh weather conditions, or intense solar irradiance. The module withstands snow loads of up to 5,400 Pa and wind loads of up to 2,400 Pa.
What real-world energy gain can I expect from the bifacial design of the Anern 580W panels in a ground-mounted installation?
The Anern N-type 560–580W series has a bifaciality factor of approximately 80%, which under favorable conditions — bright ground surface, gravel, or white membrane — translates to an additional energy yield of 10–20% compared to conventional monofacial modules. In a ground-mounted system with an optimal tilt angle and a highly reflective albedo surface, the effective output can exceed 580 W with no additional capital cost.
How do the N-type cells in Anern panels differ from the widely used P-type PERC cells?
N-type cells exhibit significantly lower Light-Induced Degradation (LID) and Light and Elevated Temperature Induced Degradation (LETID), resulting in more stable energy output throughout the entire service lifetime. In practical terms, Anern's data shows that N-type modules generate on average 3.9% more energy than their P-type PERC counterparts, and their conversion efficiency reaches 22.47%, which is above the market average for this power class.
Are the Anern Energy 560–580W Bifacial Dual Glass panels suitable for large industrial rooftops and utility-scale PV farms?
Yes, this series is designed primarily for commercial installations and utility-scale photovoltaic farms. The high unit power output of up to 580 W reduces the total number of modules required and lowers balance-of-system (BoS) and installation costs across large surface areas. The half-cut architecture with 144 cells of 182 mm improves tolerance to partial shading, which is particularly important on large roof sections where chimneys, HVAC equipment, or other structures may cast shadows.
What does the SMBB technology used in the Anern N-type 580W panels mean?
SMBB stands for Super Multi-Busbar — a contact architecture that uses a greater number of thinner busbars to collect current instead of a few wider ones. This reduces the electron travel path, lowers resistive losses, and minimizes the risk of micro-cracking during both manufacturing and long-term operation. The result is a higher fill factor (FF) on the power curve and improved parameter consistency across modules within the same series.
Add to compare