Skip to main content

Gokin vs Luxor Solar - solar panel manufacturer comparison

Gokin
Headquarters not published
Read the Gokin review
VS
Luxor Solar
Germany Founded 2007
Read the Luxor Solar review
At a glance

Luxor Solar has the broader catalog (121 vs 44 models). Gokin leads on peak efficiency at 24.50%. Luxor Solar leans bifacial (69% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
44 121
Highest power
780 Wp 720 Wp
Best efficiency
24.5% 24.1%
Average efficiency
23.6% 22.2%
Bifacial share
11% 69%
Average warranty
30 yrs 28 yrs
01

The two companies

Company facts, not datasheet figures
Luxor Solar
Founded
2007
Headquarters
Stuttgart, Germany
02

Catalogue against catalogue

Averages over every model in the database
Metric Gokin Luxor Solar
Catalog & Power
Panel Models 44 121+77
Max Power 780 W+60 W 720 W
Avg Power 517 W+8 W 509 W
Efficiency
Max Efficiency 24.50%+0.38 pp 24.12%
Avg Efficiency 23.58%+1.38 pp 22.19%
Reliability & Warranty
Avg Temp Coefficient -0.260%/°C+0.041 -0.301%/°C
Bifacial Share 5 (11%) 83 (69%)+57 pp
Avg Warranty 30.0 yrs+2.0 yr 28.0 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Gokin skews to higher efficiency: 82% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Luxor Solar offers more 600W+ panels (29% of lineup)

Gokin cell technology
Share of their models by cell architecture

Dominant cell tech: Back Contact (100%)

Luxor Solar cell technology
Share of their models by cell architecture

Dominant cell tech: HJT (38%)

04

The flagships

Highest-power models from each brand
05

Written summary

Checking cache...

Gokin is a Chinese manufacturer best known as one of the world's top wafer suppliers, with module shipments reported to have exceeded 7 GW in 2025, placing it among the global top 20 for panel output. It entered the PV Tech module bankability ratings for the first time in early 2026, a relatively recent step for its module business, and the company is also cited as the third manufacturer globally to reach large-scale mass production of back-contact (BC) modules. Luxor Solar, by contrast, is headquartered in Stuttgart, Germany, with manufacturing based in China, and traces its founding to either 2004 or 2007 depending on the source. Available reporting does not place Luxor on the BloombergNEF Tier 1 list, and its most commonly cited annual production figure, around 800 MWp, comes from company claims and dates back several years rather than from a current independent source. On institutional footprint, Gokin currently presents the stronger and more recently verified bankability profile, while Luxor's standing is harder to confirm from recent third-party data.

In terms of product focus, Gokin's growing module lineup leans on its wafer and cell manufacturing scale, with BC technology as a notable recent development alongside more conventional high-volume panels aimed at utility and commercial-scale deployments. Luxor Solar has traditionally positioned itself as a German-engineered brand for residential and commercial rooftops, emphasizing build quality and a low self-reported complaint rate, though independent certification status for some markets has been inconsistent over the years, and no confirmed dominant cell technology emerged from available sources.

For a typical 2025-2026 buyer, Gokin currently offers more verifiable bankability signals through its bankability-list entry and larger, more recently documented shipment volumes, which matters for financing and long-term warranty confidence. Luxor Solar may still suit buyers prioritizing a European brand identity, but the lack of recent independent data or confirmed Tier 1 status means buyers should request current certification and warranty documentation directly before committing. The two brands are not straightforwardly interchangeable: Gokin's case rests on scale and recent industry recognition, while Luxor's rests on brand heritage with less current third-party verification.

Generated by Claude Sonnet 5 · 2026-10-26

06

Other brand comparisons

Build your own
Manufacturers
Gokin A.B. Energy
Manufacturers
AE Solar Luxor Solar
Manufacturers
Gokin AEET
Manufacturers
AIKO Luxor Solar
Manufacturers
Gokin AKCOME
Manufacturers
APsystems Luxor Solar
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 5 Gokin offers · See 4 Luxor Solar offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.