Canadian Solar vs Lexron - solar panel manufacturer comparison
Canadian Solar has the broader catalog (292 vs 12 models). Canadian Solar leads on peak efficiency at 24.40%. Canadian Solar leans bifacial (46% of lineup).
Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.
The two companies
Canadian Solar Inc. is a global renewable energy company founded in 2001. Headquartered in Kitchener, Ontario, it manufactures solar PV modules and provides battery energy storage solutions. The company also develops utility-scale solar power and battery energy storage projects.
- Founded
- 2001
- Headquarters
- Kitchener, Canada
- Annual capacity
- 51 GW/year
- Employees
- 17,113
- Listed
- NASDAQ: CSIQ
- Tier 1 bankable
- Yes
Lexron is a solar panel brand of ACS Enerji ve Teknoloji, a Turkish manufacturer and distributor based in Izmir. The company produces mono- and polycrystalline solar panels ranging from small off-grid modules to large half-cut PERC modules, alongside inverters, batteries, and charge controllers. It primarily serves...
- Founded
- 2010
- Headquarters
- Izmir, Turkey
- Employees
- 50-200
Catalogue against catalogue
An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.
What each of them builds
Lexron skews to higher efficiency: 17% of lineup is 23%+
Canadian Solar offers more 600W+ panels (24% of lineup)
Dominant cell tech: <strong>PERC</strong> (67%)
Dominant cell tech: <strong>PERC</strong> (50%)
The flagships
Written summary
Canadian Solar is a Canadian manufacturer headquartered in Guelph, Ontario, founded in 2001 by Dr. Shawn Qu. Over more than two decades it has shipped roughly 142 GW of PV modules worldwide and consistently appears on BloombergNEF's Tier 1 list, and in 2026 it was also recognized as a Tier 1 supplier for both PV modules and battery storage on S&P Global's Tier 1 Cleantech list. Its manufacturing arm, CSI Solar, runs tens of gigawatts of annual ingot, wafer, cell and module capacity, placing it among the largest vertically integrated players globally. Lexron, by contrast, is a smaller Turkish manufacturer based in Izmir that cites over 200 MW of installed modules worldwide and holds ISO 9001:2015 certification, but no evidence surfaced of BloombergNEF Tier 1 status or production capacity on a comparable scale, meaning Canadian Solar holds a clearly stronger institutional and financial footprint.
Canadian Solar's current lineup centers on N-type TOPCon technology, including the TOPHiKu and TOPBiHiKu bifacial series reaching up to around 700 W and roughly 23 percent efficiency, serving everything from residential rooftops to large commercial and utility-scale ground-mount projects. Lexron's catalog is simpler, built around monocrystalline and polycrystalline panels spanning roughly 200 to 550-600 W, featuring anti-reflective hydrophobic coatings and a 25-year power warranty, positioning it mainly for smaller residential and regional installations rather than utility-scale deployment.
For a typical international buyer, especially on larger or debt-financed projects, Canadian Solar is the safer default given its documented bankability, manufacturing scale and mature TOPCon technology. Lexron can be a reasonable cost-driven option for smaller, straightforward installations, but the limited independent data available and unconfirmed Tier 1 status mean buyers should verify the specific supplier and project terms before committing.
Generated by Claude Sonnet 5 · 2026-10-01
Other brand comparisons
Shop prices: See 40 Canadian Solar offers
Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.