Skip to main content

APsystems vs HT-SAAE - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
HT-SAAE
China Founded 1998 Tier 1
Read the HT-SAAE review
At a glance

HT-SAAE has the broader catalog (112 vs 0 models). HT-SAAE leans bifacial (47% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 112
Highest power
0 Wp 715 Wp
Best efficiency
- 23.9%
Average efficiency
- 20.5%
Bifacial share
0% 47%
Average warranty
- 29 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
HT-SAAE

HT-SAAE (Shanghai Aerospace Automobile Electromechanical Co., Ltd.) is a state-owned enterprise specializing in photovoltaic products. The company integrates polysilicon, solar cells, battery packs, and photovoltaic + energy storage systems. They develop and manufacture solar panels for residential, commercial, and...

Founded
1998
Headquarters
Shanghai, China
Annual capacity
2+ GW/year
Employees
500+
Tier 1 bankable
Yes
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems HT-SAAE
Catalog & Power
Panel Models 0 112+112
Max Power 0 W 715 W+715 W
Avg Power 0 W 470 W+470 W
Efficiency
Max Efficiency - 23.90%
Avg Efficiency - 20.47%
Reliability & Warranty
Avg Temp Coefficient - -0.322%/°C
Bifacial Share 0 (0%) 53 (47%)+47 pp
Avg Warranty - 29.1 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

HT-SAAE skews to higher efficiency: 24% of lineup is 23%+

Power spread
Share of each catalogue in every power band

HT-SAAE offers more 600W+ panels (18% of lineup)

APsystems cell technology
Share of their models by cell architecture
HT-SAAE cell technology
Share of their models by cell architecture

Dominant cell tech: TOPCon (79%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a China-headquartered company (Jiaxing), originally founded in Silicon Valley around 2010 under the name APS before rebranding in 2015. It is best known not as a solar panel manufacturer but as a specialist in microinverters, energy storage, and module-level power electronics, with cumulative MLPE shipments surpassing 3 GW by the end of 2022 and sales in over 100 countries. In 2025 it was ranked the most bankable inverter company worldwide by Sinovoltaics, a ranking based on financial-health scoring, though this is a different category from BloombergNEF's Tier 1 module classification. HT-SAAE, by contrast, is a Chinese panel manufacturer under the state-owned China Aerospace Science and Technology Corporation (CASC), with roots tracing back to aerospace-linked solar research and a more formal corporate establishment in the late 1990s. It has held BloombergNEF Tier 1 module manufacturer status for several years running and operates an annual module production capacity generally cited around 1.5 to 2 GW, smaller than the top-tier global panel giants but well-established with roughly two decades of track record in reliability testing. Institutionally, HT-SAAE has the stronger and more verifiable footprint specifically as a panel supplier, while APsystems holds the stronger standing in the inverter and balance-of-system segment.

Because the two companies largely operate in different product categories, direct comparison as "panel manufacturers" is somewhat misleading. HT-SAAE's product lineup centers on TOPCon-based modules, including single-glass and double-glass configurations, aimed at residential and commercial rooftops, and it has repeatedly placed as a top performer in PVEL's module reliability scorecards. APsystems, meanwhile, focuses on microinverters and rapid-shutdown devices that typically pair with panels from other brands on residential and small commercial rooftops, making it a complementary rather than competing product to HT-SAAE's modules in most installations.

For a typical buyer in 2025 comparing these as if choosing panels, HT-SAAE is the more relevant option given its sustained BloombergNEF Tier 1 status and PVEL reliability track record. APsystems is better evaluated as the microinverter choice that could sit alongside HT-SAAE or another brand's panels rather than as a direct substitute. Buyers should treat this less as a head-to-head rivalry and more as two different layers of a solar installation.

Generated by Claude Sonnet 5 · 2026-11-15

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar HT-SAAE
Manufacturers
APsystems AEET
Manufacturers
AIKO HT-SAAE
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar HT-SAAE
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.