Skip to main content

Tata Power Solar vs APsystems - solar panel manufacturer comparison

Tata Power Solar
India Founded 1989 Tier 1
Read the Tata Power Solar review
VS
APsystems
China Founded 2010
Read the APsystems review
At a glance

Tata Power Solar has the broader catalog (38 vs 0 models). Tata Power Solar leans bifacial (100% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
38 0
Highest power
642 Wp 0 Wp
Best efficiency
23.1% -
Average efficiency
21.5% -
Bifacial share
100% 0%
Average warranty
28 yrs -
01

The two companies

Company facts, not datasheet figures
Tata Power Solar

Tata Power Solar is India's largest integrated solar company. They operate in manufacturing solar modules, EPC services for solar power projects, and creating innovative solar products. The company is committed to providing access to energy, especially in remote, off-grid parts of India.

Founded
1989
Headquarters
Mumbai, Maharashtra, India
Annual capacity
4.3 GW/year
Employees
1,245
Tier 1 bankable
Yes
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
02

Catalogue against catalogue

Averages over every model in the database
Metric Tata Power Solar APsystems
Catalog & Power
Panel Models 38+38 0
Max Power 642 W+642 W 0 W
Avg Power 580 W+580 W 0 W
Efficiency
Max Efficiency 23.05% -
Avg Efficiency 21.52% -
Reliability & Warranty
Avg Temp Coefficient -0.354%/°C -
Bifacial Share 38 (100%)+100 pp 0 (0%)
Avg Warranty 28.4 yrs -

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Tata Power Solar skews to higher efficiency: 5% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Tata Power Solar offers more 600W+ panels (24% of lineup)

Tata Power Solar cell technology
Share of their models by cell architecture

Dominant cell tech: PERC (82%)

APsystems cell technology
Share of their models by cell architecture
04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a China-headquartered solar electronics specialist, founded in 2010 (its own materials cite Jiaxing, Zhejiang, though some accounts trace early roots to Silicon Valley) and focused specifically on microinverters, energy storage and rapid-shutdown devices rather than panels themselves. It does not appear on BloombergNEF's Tier 1 module list, since it is not a module maker, but in September 2025 Sinovoltaics ranked APsystems the most bankable inverter company worldwide based on an Altman Z-score financial-strength analysis. Tata Power Solar, by contrast, is an Indian manufacturer with roots going back to a 1989 Tata-BP joint venture that began production in 1991, later becoming a wholly Tata-owned subsidiary in 2012; it was rated a BNEF Tier 1 module manufacturer as early as 2016 and its Tirunelveli, Tamil Nadu plant reported roughly 3.3 GW of module and 846 MW of cell output in FY25. On institutional footprint, Tata Power Solar has the clearer edge, backed by decades of manufacturing scale, a Tier 1 module history and the broader Tata Group balance sheet, while APsystems' bankability claim is narrower, tied to inverter financial-risk scoring rather than a BNEF module listing.

In practice the two companies are not direct competitors so much as complementary players in a system: APsystems supplies microinverters (its DS3 and QT2 lines) aimed at residential and small commercial rooftops, plus three-phase products for larger commercial and industrial installations, and its equipment is typically paired with panels from other manufacturers. Tata Power Solar makes the panels themselves, using TOPCon and Mono PERC cell technology, and serves everything from government-backed residential rooftop programs ("Ghar Ghar Solar") and commercial rooftops like the Cricket Club of India project in Mumbai to large utility-scale ground-mount EPC work, with a stated EPC portfolio exceeding 16 GW for ground-mount projects.

For a typical buyer in 2025, the choice usually isn't "either/or": if you need solar panels, especially in the Indian market where ALMM/DCR compliance matters, Tata Power Solar is a well-established, Tier 1-rated option with real manufacturing scale behind it. If you need the power electronics layer, especially for rooftop systems wanting module-level monitoring or shade resilience, APsystems is a recognized, financially strong microinverter brand that can be deployed alongside Tata or most other panel brands. Treating them as interchangeable alternatives would be a category error rather than a genuine comparison.

Generated by Claude Sonnet 5 · 2026-11-14

06

Other brand comparisons

Build your own
Manufacturers
Tata Power Solar A.B. Energy
Manufacturers
AE Solar APsystems
Manufacturers
Tata Power Solar AEET
Manufacturers
AIKO APsystems
Manufacturers
Tata Power Solar AKCOME
Manufacturers
ARTsolar APsystems
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.