Middle of its segment, weak in heat
The Ulica Solar MONO HALF-CUT series utilizes advanced half-cut cell technology, which significantly reduces internal losses and improves the overall efficiency of the modules in real-world operating conditions. Thanks to the use of Half-Cut technology, these panels generate lower resistive losses and show significantly higher resistance to the disadvantageous phenomenon of partial shading, which is crucial for residential building roofs with complex geometry. This solution directly translates into more stable power production and higher efficiency at high temperatures due to a low temperature coefficient, which distinguishes this series from standard components. These products have been designed for investors seeking reliability and durability, which is confirmed by numerous certificates of resistance to extreme weather conditions, including ammonia corrosion and salt mist. The panels are characterized by exceptional mechanical strength against high snow and wind loads, ensuring the safety of the entire installation for decades. The use of modern monocrystalline cell architecture makes it an ideal choice for both home prosumers and large commercial systems. By investing in this series, the user receives an optimal price-to-power ratio while maintaining the quality standards of a global manufacturer from the prestigious Tier 1 list. This is a proven technology that effectively minimizes the risk of hot-spots and guarantees maximum energy yield from the available mounting surface.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Hot climates, tight roof space and roofs where every square metre has to count.
Bottom 1% of the TOPCon 550-600 W segment, against a median of -0.290. Ranked 12,629th in the whole database.
Bottom 4% of the TOPCon 550-600 W segment, against a median of 22.44%. Ranked 9,013th in the whole database.
Bottom 4% of the TOPCon 550-600 W segment, against a median of 224.4. Ranked 8,857th in the whole database.
- At 21.3% efficiency, this panel is 1.2pp below the TOPCon 550-600W median of 22.4%
- Power density of 212.8 W/m² is 11.6 W/m² below TOPCon 550-600W median (224.4 W/m²) - needs more roof space
- -0.36%/°C temperature coefficient - 0.07pp worse than TOPCon 550-600W median (-0.29%/°C), expect higher hot weather losses
- 28.3 kg weight - 2.9 kg lighter than TOPCon 550-600W median (31.2 kg), reducing installation effort
- In the top 63% for efficiency among all TOPCon panels
Specifications
Datasheet charts
Measured curves published by Ulica Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 550 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 2343 panels of the same or similar size to this one, within ±10 mm. See them here Found 2385 panels of the same or similar size to this one, within ±25 mm. See them here Found 2404 panels of the same or similar size to this one, within ±50 mm. See them here Found 2569 panels of the same or similar size to this one, within ±100 mm. See them here
About the MONO HALF-CUT series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.