Skip to main content
Shinson Technology S360M48BPV
Shinson Technology Brand review

S360M48BPV

360 Wp TOPCon Bifacial
ComparePV verdict

Middle of its segment, modest efficiency

Rank 13,134 of 14,005
Compare panels Datasheet PDF
Power (Wp)
360
Weak · bottom 22%
Efficiency (%)
13.94
Weak · bottom 4%
Density (Wp/m²)
139.4
Weak · bottom 4%
Temp (%/°C)
-0.330
Weak · bottom 15%
Weight (kg)
32.5
Weak · 6.5 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

Shinson Technology S.blade series photovoltaic panels utilize innovative shingled technology, which eliminates traditional busbar connections between cells. Thanks to overlapping cells, these modules offer maximum utilization of the active surface area, which directly translates into higher energy yield per square meter. This solution effectively reduces the risk of micro-cracks and minimizes energy losses resulting from shading, which is crucial in dense urban areas. Shingled cell technology makes the panels exhibit much better aesthetics, creating a uniform, almost black surface, ideal for modern architecture. The S.blade design is also characterized by a low temperature coefficient, allowing for stable operation even on hot days. This series is dedicated to investors seeking uncompromising performance and increased resistance to mechanical loads, such as snow or strong wind. By choosing S.blade, the user receives a product that stands out from the competition not only due to its unique appearance but above all due to increased tolerance to partial shading, which optimizes the operation of the entire system in difficult installation conditions. It is an excellent choice for residential and commercial installations where every watt of power counts.

Ranking

112 panels in the segment TOPCon 350-400 W
Metric This panel Median Position in segment Overall rank
Module efficiency 13.94% 18.20% Weak · bottom 4% 13,924
Power density 139.4 181.8 Weak · bottom 4% 13,905
Temperature coefficient -0.330 -0.290 Weak · bottom 15% 8,545
Weight per kWp 90.3 68.9 Weak · bottom 17% 13,866
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

0 positive · 3 caution
Best for

Residential, commercial, shaded-installations and hot-climate.

Not ideal for

Tight roof space, roofs where every square metre has to count and hot climates.

Watch-outs
13.94% module efficiency

Bottom 4% of the TOPCon 350-400 W segment, against a median of 18.20%. Ranked 13,924th in the whole database.

139.4 watts per square metre

Bottom 4% of the TOPCon 350-400 W segment, against a median of 181.8. Ranked 13,905th in the whole database.

-0.330 %/°C temperature coefficient

Bottom 15% of the TOPCon 350-400 W segment, against a median of -0.290.

Notes from the database
  • Module efficiency of 13.9% is 2.1pp below average for TOPCon 0-400W panels (median: 16.0%)
  • At 139.4 W/m², this panel generates 20.4 W/m² less per unit area than TOPCon 0-400W median (159.8 W/m²)
  • Temperature coefficient of -0.33%/°C is 0.04pp worse than TOPCon 0-400W median (-0.29%/°C) - higher losses in summer heat
  • At 32.5 kg, this panel is 9.0 kg heavier than the TOPCon 0-400W median (23.5 kg) - more demanding for installation crews
  • Ranked #13924 out of 14005 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 360 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 13.94 % Weak Segment median 18.20%
Vmpp · Impp 33.58 V · 10.73 A Operating point at max power
Voc · Isc 38.91 V · 11.58 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 32.5 kg Weak Weak · 6.5 kg above median
Cells 96 · TOPCon Monocrystalline
Coefficient Pmax -0.330 %/°C Weak bottom 15% of its segment
Coefficient Voc · Isc -0.260 · 0.042 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
Degradation 0.40 % Per year after the first

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.330 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Shinson Technology S360M48BPV 360 W 13.94% -0.330 32.5 kg You are here
NS-330MH-80 330 W 23.15% -0.290 15.0 kg 18 kg lighter, +9.2 pp, -5 yr warranty
NS-330MH-80 330 W 23.15% -0.290 15.0 kg 18 kg lighter, +9.2 pp, -5 yr warranty
GKA210M320W 320 W 23.00% - 16.2 kg -40 W, 16 kg lighter, +9.1 pp
GKA210M340W 340 W 23.00% - 16.2 kg -20 W, 16 kg lighter, +9.1 pp
GKA210M360W 360 W 23.00% - 16.2 kg 16 kg lighter, +9.1 pp
GKA210M380W (1/4*4*38) 380 W 23.00% - 17.1 kg +20 W, 15 kg lighter, +9.1 pp
GKA210M400W (1/2*4*20) 400 W 23.00% - 18.0 kg +40 W, lighter, +9.1 pp
GKA210M400W (1/4*4*40) 400 W 23.00% - 18.0 kg +40 W, lighter, +9.1 pp
GKA210M380W (1/2*4*19) 380 W 23.00% - 17.1 kg +20 W, 15 kg lighter, +9.1 pp
SPR-MAX3-400-COM 400 W 22.60% -0.270 19.0 kg Lighter, +8.7 pp, +10 yr warranty
S345M48BPV 345 W 13.36% -0.330 32.5 kg -15 W, -0.6 pp
S350M48BPV 350 W 13.55% -0.330 32.5 kg -10 W, -0.4 pp
S355M48BPV 355 W 13.74% -0.330 32.5 kg Very close match
S365M48BPV 365 W 14.13% -0.330 32.5 kg Very close match
S540M72P3BF 540 W 20.90% -0.360 31.8 kg +180 W, hotter, +7.0 pp
S545M72P3BF 545 W 21.10% -0.360 31.8 kg +185 W, hotter, +7.2 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +290 W, cooler, +11.3 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How does the shingled cell technology in Shinson S.blade panels differ from conventional PV modules?
In S.blade modules, cells overlap like slate roof shingles, eliminating the metal busbars between them. This maximizes the active surface area, resulting in higher energy yield per square meter. Removing busbars also reduces the risk of microcracks and minimizes power losses caused by partial shading of individual cells.
What warranty does Shinson Technology offer on the S.blade series?
Shinson Technology backs the S.blade series with a 30-year product warranty covering physical and material defects, plus a 30-year linear power output warranty. This means the manufacturer guarantees a defined performance level for three full decades — one of the longest warranties available in the PV market.
Are Shinson S.blade panels bifacial, and does that matter for a pitched-roof installation?
Yes, the S.blade series are bifacial modules — electricity is generated on both sides of the panel. On a typical pitched roof, the rear side captures light reflected from the roofing surface or surroundings, which can add a few percent to total yield. The greatest bifacial gains come from ground-mount or flat-roof installations with a high-albedo surface beneath the array.
How do Shinson S.blade panels handle partial shading from a chimney, antenna, or dormer window?
Thanks to the shingled cell architecture and the absence of conventional busbars, S.blade modules show improved tolerance to partial shading compared to standard panels. Shadowing one section of the module does not suppress the entire cell string as severely as in traditional designs — a critical advantage in dense urban environments where shading is hard to avoid.
What is TOPCon technology used in the S.blade cells, and what real-world benefits does it provide?
TOPCon (Tunnel Oxide Passivated Contact) is an advanced cell technology in which a thin tunnel oxide layer minimizes charge-carrier recombination. The result is higher conversion efficiency and a lower temperature coefficient compared to PERC cells. TOPCon panels perform better at high summer temperatures, translating into greater annual energy yield even in temperate climates.
What is the peak power of Shinson S.blade panels, and how many modules do I need for a home installation?
S.blade panels reach a peak output of 365 Wp. A standard residential system of 5–10 kWp requires between 14 and 28 modules. The high efficiency of TOPCon cells combined with shingled technology means S.blade delivers more energy from the same roof area than typical PERC panels — a key advantage whenever mounting space is limited.
Add to compare