Middle of its segment, heavy for its output
The HY-DH96N11 series is a dual-sided photovoltaic module built on N-Type cells and the 210R platform, combining half-cut cell technology with a bifacial, dual glass design. This construction captures light reflected off the ground surface to meaningfully boost energy yield without increasing installation footprint, helping to lower the cost of energy per kWp (LCOE). The panel stands out for its low susceptibility to LID, LeTID and PID degradation, keeping output stable throughout its service life, while a low power temperature coefficient means it performs better on hot days and under low-light conditions than conventional P-Type modules. A reinforced frame and tempered glass provide resistance to heavy snow, wind and hail loads, making the series a strong fit for both rooftop installations and ground-mounted solar farms exposed to demanding weather. Backed by a long-term linear power warranty and strict manufacturing quality control, the HY-DH96N11 is built for investors and installers seeking high reliability and predictable returns on commercial and industrial projects.
Ranking
Signals from the data
Commercial, utility-scale and shaded-installations.
Weight-limited structures.
Bottom 22% of the N-type 450-500 W segment, against a median of 50.3.
The use of N-type half-cut cells on the large 210R wafer platform delivers up to 23.5% efficiency and up to 470 Wp, putting the HY-DH96N11 series on par with flagship modules such as Trina Solar Vertex S+ i-TOPCon Ultra and Astronergy ASTRO N7s 2.0 (470 Wp, 23.5%).
The double-sided dual-glass design captures light reflected from the ground, boosting energy yield without increasing installation footprint, which directly lowers the levelized cost of energy (LCOE) per kWp.
The manufacturer provides a 30-year power degradation warranty, in line with the current standard for tier-1 N-type modules and exceeding the typical 25-year power warranties still found on older P-type series.
N-type cell technology eliminates the light-induced degradation (LID), thermal/elevated-temperature degradation (LeTID), and potential-induced degradation (PID) issues common in P-type/PERC modules, resulting in more stable, predictable energy output over the full 30-year service life.
A reinforced frame and tempered glass provide strong resistance to snow, wind, and hail loads, making the series suitable for both demanding rooftop installations and ground-mounted utility-scale PV farms.
A 12-year product warranty is shorter than the 15-year standard increasingly offered by tier-1 manufacturers on N-type modules paired with 30-year power warranties (e.g., Trina Solar Vertex S+). The gap between the shorter product warranty and the long power warranty can be seen as a comparative weak point in total cost of ownership analysis.
- At 23.0% efficiency, this panel is on par with typical N-type 450-500W modules
- At 230.2 W/m² power density, this panel generates 4.0 W/m² more per unit area than N-type 450-500W median (226.2 W/m²)
- At -0.29%/°C, hot weather performance is typical for N-type 450-500W panels
- Weight of 25.0 kg is 1.3 kg above N-type 450-500W median (23.7 kg) - verify structural support
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 1444 panels of the same or similar size to this one, within ±10 mm. See them here Found 1474 panels of the same or similar size to this one, within ±25 mm. See them here Found 3758 panels of the same or similar size to this one, within ±50 mm. See them here Found 4117 panels of the same or similar size to this one, within ±100 mm. See them here
About the HY-DH96N11 series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.