Skip to main content
Runergy HY-DH144N8-600

Runergy HY-DH144N8-600

600 Wp N-type Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 3,009 of 14,129
Compare panels Datasheet PDF
Power (Wp)
600
Weak · bottom 3%
Efficiency (%)
23.20
Strong · top 24%
Density (Wp/m²)
232.3
Strong · top 23%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
32.7
Typical · median 32.8 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Runergy HY-DH144N8 Plus series consists of photovoltaic modules built on N-Type cells manufactured in TOPCon technology, combining high efficiency with strong resistance to degradation over time. The half-cut cell architecture paired with a multi-busbar (SMBB) layout reduces resistive losses and improves low-light performance, translating into a real gain in energy yield during overcast conditions or in early morning and late afternoon light. Thanks to its bifacial dual-glass design, the module also captures irradiance reflected from the ground on its rear side - a feature that pays off particularly well on ground-mounted arrays or rooftops with light-colored surfaces, gravel, or snow, where ambient albedo is high. The panels stand out for their low annual degradation, characteristic of N-Type cells, allowing them to maintain stable power output throughout the entire service life, a factor investors value when planning long-term return on investment. Compatibility with 1500V DC systems enables longer strings and reduces cabling and balance-of-system (BoS) costs, lowering the overall cost of the installation. The HY-DH144N8 Plus series is well suited for both commercial installations and large-scale solar farms, where the ratio of output to surface area and predictable long-term ROI matter most.

Ranking

368 panels in the segment N-type 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.20% 22.77% Strong · top 24% 1,349
Power density 232.3 227.7 Strong · top 23% 1,295
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 54.5 52.8 Typical 8,918
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

2 positive · 0 caution
Best for

Commercial, utility-scale and shaded-installations.

Strengths
232.3 watts per square metre

Top 23% of the N-type 600-650 W segment, against a median of 227.7.

23.20% module efficiency

Top 24% of the N-type 600-650 W segment, against a median of 22.77%.

Notes from the database
  • Efficiency of 23.2% matches the N-type 600-650W median
  • Power density of 232.3 W/m² packs 4.6 W/m² more into the same footprint vs N-type 600-650W median (227.7 W/m²)
  • Temperature coefficient of -0.29%/°C matches the N-type 600-650W median
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • #1349 for efficiency, #2220 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 600 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.20 % Strong Segment median 22.77%
Vmpp · Impp 44.85 V · 13.38 A Operating point at max power
Voc · Isc 52.79 V · 13.97 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×35 mm · 2.58 m² of roof
Weight 32.7 kg Typical Typical · median 32.8 kg
Cells 144 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 524 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Runergy in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 600 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Runergy HY-DH144N8-600 600 W 23.20% -0.290 32.7 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +50 W, lighter, +2.0 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +45 W, lighter, +1.8 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -40 W, lighter, +1.6 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +40 W, lighter, +1.6 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -45 W, lighter, +1.4 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +35 W, lighter, +1.4 pp
HY-DH144P8-535 535 W 20.70% -0.350 32.0 kg -65 W, hotter, -2.5 pp
HY-DH144P8-540 540 W 20.90% -0.350 32.0 kg -60 W, hotter, -2.3 pp
HY-WH144P8-545 545 W 21.10% -0.350 27.6 kg -55 W, hotter, -2.1 pp
HY-WH144P8-550 550 W 21.30% -0.350 27.6 kg Hotter, lighter, -1.9 pp
HY-WH144P8-555 555 W 21.50% -0.350 27.6 kg Hotter, lighter, -1.7 pp
HY-WH144P8-560 560 W 21.70% -0.350 27.6 kg Hotter, lighter, -1.5 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +30 W, cooler, +1.2 pp

Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2548 panels of the same or similar size to this one, within ±100 mm. See them here

About the HY-DH144N8 Plus series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series reaches up to 600 Wp, made possible by N-type TOPCon cells in a half-cut architecture combined with SMBB multi-busbar technology. This high per-unit power output means fewer modules are needed to reach a given system size, reducing mounting structure and labor costs.
How does bifacial technology in Runergy HY-DH144N8 Plus differ from standard one-sided panels?
Bifacial panels with a double-glass design capture light not only on the front but also on the rear side, using radiation reflected from the ground. This delivers extra energy yield, especially in ground-mounted installations, light-colored roofs, or surfaces covered with gravel or snow, where albedo is high. Standard monofacial panels cannot capture this additional gain.
What warranty comes with Runergy HY-DH144N8 Plus panels?
The HY-DH144N8 Plus series carries a 12-year product warranty and a 30-year linear power warranty. Thanks to the low annual degradation typical of N-type cells, the panels maintain stable output over their entire service life, helping investors forecast long-term project profitability more reliably.
Are Runergy HY-DH144N8 Plus panels compatible with 1500V DC systems?
Yes, this series is compatible with 1500V DC systems, allowing for longer strings connected to a single inverter. This reduces the number of required BoS components, such as cabling and junction boxes, lowering the overall cost of the installation.
What types of installations are Runergy HY-DH144N8 Plus panels suited for?
Given their high per-unit power, bifacial design, and 1500V DC compatibility, the HY-DH144N8 Plus series is primarily intended for commercial installations and large PV farms, where the ratio of output to occupied area and predictable long-term return on investment are critical.
Is Runergy a Tier 1 manufacturer and where are the panels made?
Yes, Runergy is listed as a Tier 1 manufacturer, reflecting its financial stability and production scale as recognized by project financing institutions. The HY-DH144N8 Plus panels are manufactured in China, where the company operates facilities producing both cells and finished PV modules.
Add to compare