Strong in heat, heavy for its output
The Risen TITAN RSM120-6-BHDG series represents an advanced solution in the Bifacial Dual Glass module segment, redefining performance standards in harsh environmental conditions. Thanks to the use of double glass and multi-busbar (MBB) technology cells, these panels minimize losses resulting from micro-cracks and provide exceptional resistance to potential-induced degradation. A key differentiator of the series is its ability to generate energy from both sides of the module, which, combined with a low temperature coefficient, translates into a significantly higher annual yield compared to standard monofacial units. The use of half-cut cell technology allows for efficient operation even in partial shading, solving the problem of power drops in densely built-up areas or on farms with specific terrain features. This solution is primarily dedicated to investors seeking maximum durability and the lowest cost of energy (LCOE) in the long term. The robust glass-glass construction protects components from moisture and ammonia, making these panels an ideal choice for agricultural and ground-mounted installations with high albedo. By choosing the TITAN series, you gain increased mechanical resistance and the assurance of stable system operation for decades, putting this product a step ahead of traditional backsheet solutions.
Ranking
Signals from the data
Commercial, agrivoltaic, shaded-installations and hot-climate.
Weight-limited structures, tight roof space and roofs where every square metre has to count.
Top 21% of the HJT 350-400 W segment, against a median of -0.259.
Bottom 1% of the HJT 350-400 W segment, against a median of 59.2. Ranked 14,037th in the whole database.
Bottom 19% of the HJT 350-400 W segment, against a median of 20.90%.
Bottom 19% of the HJT 350-400 W segment, against a median of 209.3.
- At 20.5% efficiency, this panel is on par with typical HJT 0-400W modules
- At 204.9 W/m² power density, roof space requirements are typical for HJT 0-400W panels
- Temperature coefficient of -0.24%/°C matches the HJT 0-400W median
- At 35.0 kg (13.5 kg above HJT 0-400W median of 21.5 kg), requires checking roof load capacity
- 85% bifaciality enables rear-side power generation, boosting yield by 4-13% on reflective surfaces
Specifications
Datasheet charts
Measured curves published by Risen in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 350 Wp appear here. The rest cover the whole series.
I-V characteristics at different temperatures (AM1.5, 1000 W/m²)
Whole series
I-V characteristics at different temperatures (AM1.5, 1000 W/m²)
Whole series
I-V characteristics at different temperatures (AM1.5, 1000 W/m²)
Whole series
I-V characteristics at different temperatures (AM1.5, 1000 W/m²)
Whole series
I-V characteristics at different temperatures (AM1.5, 1000 W/m²)
Whole series
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 32 panels of the same or similar size to this one, within ±10 mm. See them here Found 137 panels of the same or similar size to this one, within ±25 mm. See them here Found 444 panels of the same or similar size to this one, within ±50 mm. See them here Found 827 panels of the same or similar size to this one, within ±100 mm. See them here
About the TITAN RSM120-6-BHDG series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.