Risen Brand review

Risen RSM110-8-565BHDG

565 Wp HJT Bifacial 85%

67 of 100

ComparePV verdict

Middle of its segment, modest efficiency

Rank 5,522 of 14,129

Compare panels Datasheet PDF

Power (Wp)

565

Weak · bottom 11%

Efficiency (%)

21.60

Weak · bottom 14%

Density (Wp/m²)

216.2

Weak · bottom 14%

Temp (%/°C)

-0.240

Typical · median -0.240

Weight (kg)

34.5

Weak · 1.9 kg above median

Warranty (yrs)

Typical · median 30 yrs

The Risen TITAN RSM110-8-BHDG series consists of advanced Bifacial Dual Glass modules that redefine performance standards in harsh environmental conditions. The use of half-cut cell technology combined with double glass makes these panels exceptionally resistant to potential-induced degradation and atmospheric factors, resulting in a longer lifespan for the entire installation. Thanks to a high bifaciality factor, these modules generate additional energy from radiation reflected off the ground, which is crucial in commercial projects and large photovoltaic farms. The design based on large-format 210 mm silicon wafers allows for a significant reduction in BOS system costs and a lower LCOE. Investors choosing this series primarily gain yield stability throughout the power plant's life cycle, even at high ambient temperatures, thanks to a low temperature coefficient of power. Risen TITAN RSM110-8-BHDG eliminates the problem of rapid efficiency decline in traditional modules, offering increased mechanical resistance to snow and wind loads. It is an ideal solution for demanding investors looking for a balance between modern technology and maximizing return on investment in the Polish climate.

Ranking

32 panels in the segment HJT 550-600 W

Metric This panel Median Position in segment Overall rank

Module efficiency 21.60% 22.48% Weak · bottom 14% 7,716

Power density 216.2 224.8 Weak · bottom 14% 7,680

Temperature coefficient -0.240 -0.240 Typical 13

Weight per kWp 61.1 55.2 Weak · bottom 17% 12,680

Performance warranty 30 yrs 30 yrs Typical 21

Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

0 positive · 3 caution

Best for

Commercial, utility-scale and hot-climate.

Not ideal for

Tight roof space, roofs where every square metre has to count and weight-limited structures.

Watch-outs

21.60% module efficiency

Bottom 14% of the HJT 550-600 W segment, against a median of 22.48%.

216.2 watts per square metre

Bottom 14% of the HJT 550-600 W segment, against a median of 224.8.

61.1 kg per kWp

Bottom 17% of the HJT 550-600 W segment, against a median of 55.2.

Notes from the database

At 21.6% efficiency, this panel is 0.9pp below the HJT 550-600W median of 22.5%
216.2 W/m² power density is 8.6 W/m² below HJT 550-600W median (224.8 W/m²) - requires larger installation area
Temperature coefficient of -0.24%/°C matches the HJT 550-600W median
Weight of 34.5 kg is 1.9 kg above HJT 550-600W median (32.6 kg) - verify structural support
Bifaciality factor of 85% can add 4-13% extra yield with reflective mounting surface

Specifications

Open datasheet PDF

Nominal power (Pmax) 565 Wp Nameplate at 1000 W/m², 25 °C

Module efficiency 21.60 % Weak Segment median 22.48%

Vmpp · Impp 34.53 V · 16.39 A Operating point at max power

Voc · Isc 41.18 V · 17.47 A Sizes the string length

Max system voltage 1500 V Longer strings than 1000 V modules

Dimensions 2384×1096×30 mm · 2.61 m² of roof

Weight 34.5 kg Weak Weak · 1.9 kg above median

Cells 132 · HJT Monocrystalline

Bifaciality 85 % Rear output as a share of front

Coefficient Pmax -0.240 %/°C Typical median -0.240 of its segment

Coefficient Voc · Isc -0.220 · 0.047 %/°C

NOCT 43 °C At 800 W/m², 20 °C ambient

Product warranty 15 years Hardware defects only

Performance warranty 30 years Typical median 30 yrs · median 30 yrs

End-of-warranty output 90.3 % Equals 510 W guaranteed

Degradation 1.00 → 0.30 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Risen in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 565 Wp appear here. The rest cover the whole series.

I-V characteristics at different temperatures (AM1.5, 1000 W/m²) Whole series

Simulations

Live - change any input

Lifetime output & value

30 years at 1200 kWh/kWp/year and €0.50 per kWh

Power in year 30

Lifetime energy

Energy value

With bifacial gain

Irradiance Energy price Price inflation 0%/yr

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses

-0.240 %/°C against a segment median of -0.240

Try your own cell temperature (°C) 60° · - · -

Bifacial gain

Rear gain over light concrete: -

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Risen panels See 12 Risen offers

Filter these Similar power Same cell type Same manufacturer

Size Any ±10 mm ±25 mm ±50 mm ±100 mm

Panel Power Eff. Temp. Weight Difference

Risen RSM110-8-565BHDG 565 W 21.60% -0.240 34.5 kg You are here

LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Hotter, lighter, +3.2 pp

LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Hotter, lighter, +3.0 pp

LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Hotter, 18 kg lighter, +2.8 pp

JAT60S40-540/LR 540 W 24.40% -0.260 23.5 kg -25 W, lighter, +2.8 pp

GK-5-60HG-540M 540 W 24.40% -0.260 23.3 kg -25 W, lighter, +2.8 pp

JKM545-54QL6-DV-F1-EU 545 W 24.27% -0.260 27.5 kg Hotter, lighter, +2.7 pp

LR7-60HVH-545M 545 W 24.20% -0.260 25.0 kg Hotter, lighter, +2.6 pp

RSM110-8-535BMDG 535 W 20.50% -0.340 33.5 kg -30 W, hotter, -1.1 pp

RSM110-8-540BMDG 540 W 20.70% -0.340 33.5 kg -25 W, hotter, -0.9 pp

RSM110-8-545BMDG 545 W 20.90% -0.340 33.5 kg -20 W, hotter, -0.7 pp

RSM110-8-550BMDG 550 W 21.00% -0.340 33.5 kg -15 W, hotter, -0.6 pp

RSM110-8-555BMDG 555 W 21.20% -0.340 33.5 kg -10 W, hotter, -0.4 pp

RSM110-8-560BMDG 560 W 21.40% -0.340 33.5 kg Hotter, lighter, -0.2 pp

RSM110-8-570BHDG 570 W 21.80% -0.240 34.5 kg Very close match

RSM110-8-575BHDG 575 W 22.00% -0.240 34.5 kg +10 W, +0.4 pp

RSM110-8-580BHDG 580 W 22.20% -0.240 34.5 kg +15 W, +0.6 pp

AIKO-A680-MDE72Mw 680 W 25.20% -0.260 29.0 kg +115 W, lighter, +3.6 pp

Found 72 panels of the same or similar size to this one, within ±10 mm. See them here Found 72 panels of the same or similar size to this one, within ±25 mm. See them here Found 1221 panels of the same or similar size to this one, within ±50 mm. See them here Found 1917 panels of the same or similar size to this one, within ±100 mm. See them here

About the TITAN RSM110-8-BHDG series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What does HJT technology mean in the Risen TITAN RSM110-8-BHDG series, and how does it compare to standard PERC panels?

HJT (Heterojunction Technology) combines N-type monocrystalline silicon cells with thin amorphous silicon layers, delivering higher efficiency and superior high-temperature performance. In the RSM110-8-BHDG series, this results in a temperature coefficient of just -0.24%/°C - roughly 30% better than typical PERC modules at -0.35%/°C. In practice, that means noticeably lower power losses on hot summer days and higher annual energy yields.

What warranties does the Risen TITAN RSM110-8-BHDG come with, and are they reliable?

Risen provides two warranties: a 15-year product warranty covering material and manufacturing defects, and a 30-year linear power warranty - a premium standard for commercial-grade bifacial modules. Risen Energy holds Tier 1 status, confirming the financial stability of the warrantor and the long-term credibility of its commitments. This matters particularly for utility-scale PV projects with multi-year bank financing.

Is the bifaciality of the Risen RSM110-8-BHDG panels actually worth it in real-world conditions?

Yes, when the installation is properly designed. The RSM110-8-BHDG series has a bifaciality factor of 85±10%, meaning the rear side can generate up to 85% of the front-side output from ground-reflected irradiance. Snow-covered ground in winter reflects sunlight intensively and noticeably boosts yield. On ground-mounted systems with light-colored gravel or white membranes, the bifacial gain can deliver an additional 5-15% of annual energy output.

Can the Risen TITAN RSM110-8-BHDG panels withstand heavy snow loads and strong winds?

Yes. The RSM110-8-BHDG series is certified for snow loads up to 5,400 Pa and wind loads up to 2,400 Pa. The Dual Glass construction - replacing a conventional polymer backsheet - adds structural rigidity and eliminates backsheet cracking risk from long-term thermal cycling. This is a key advantage in locations exposed to heavy snowfall, high winds, or significant seasonal temperature swings.

What is the maximum power output of the Risen RSM110-8-BHDG and which type of installation is it designed for?

The RSM110-8-BHDG series reaches up to 600 Wp under Standard Test Conditions (STC). The large 210 mm wafer cells and 2384×1096 mm module dimensions reduce the number of modules per MW, lowering BoS (Balance of System) costs and improving the LCOE of the entire plant. The series primarily targets large commercial installations and utility-scale PV farms, but also suits expansive industrial rooftops and warehouse facilities.

How do the Risen TITAN RSM110-8-BHDG panels perform during heat waves - do they lose significant power output?

Thanks to HJT technology, the RSM110-8-BHDG series has a power temperature coefficient of just -0.24%/°C. At a typical cell temperature of 65°C (40°C above STC), the module loses only about 9.6% of its rated power - compared to roughly 14% for a standard PERC module. On hot summer days, these HJT modules clearly outperform PERC in real-world energy yield and output stability.

Add to compare