Skip to main content
Renewsys Brand review

DESERV Extreme 144X-605

605 Wp TOPCon Bifacial 80%
ComparePV verdict

Space saver, no clear weak spot

Rank 2,511 of 14,005
Compare panels Datasheet PDF
Power (Wp)
605
Weak · bottom 15%
Efficiency (%)
23.45
Strong · top 11%
Density (Wp/m²)
234.5
Strong · top 10%
Temp (%/°C)
-0.292
Typical · median -0.290
Weight (kg)
31.5
Typical · median 32.7 kg
Warranty (yrs)
30
Typical · median 30 yrs

The DESERV Extreme 144X M10R TOPCon Bifacial Dual Glass series from RenewSys is built for investors who want to squeeze maximum energy yield out of every square meter of roof or ground. The panel uses n-type monocrystalline TOPCon half-cut cells, translating into higher conversion efficiency and lower power losses under partial shading. The dual glass construction combined with bifacial technology captures light reflected off the surrounding surface, generating extra energy from the rear side of the panel without expanding the installation footprint. This makes it especially valuable for projects with light-colored ground cover, flat commercial roofs, and utility-scale solar farms, where every additional watt counts. The robust glass-glass build offers better resistance to moisture ingress, microcracks, and long-term degradation, effectively extending system lifespan and lowering the levelized cost of energy (LCOE). A low power temperature coefficient keeps the module performing well even on hot days, while the low LID/LeTID degradation characteristic of TOPCon technology increases confidence in long-term yield projections. It's a strong choice for installers and investors seeking the balance of high power output, durability, and predictable return on investment.

Ranking

1,086 panels in the segment TOPCon 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.45% 22.80% Strong · top 11% 862
Power density 234.5 227.7 Strong · top 10% 856
Temperature coefficient -0.292 -0.290 Typical 6,056
Weight per kWp 52.1 53.1 Typical 5,508
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

2 positive · 0 caution
Best for

Utility-scale, commercial, shaded-installations and hot-climate.

Strengths
234.5 watts per square metre

Top 10% of the TOPCon 600-650 W segment, against a median of 227.7.

23.45% module efficiency

Top 11% of the TOPCon 600-650 W segment, against a median of 22.80%.

Notes from the database
  • 23.4% module efficiency - 0.6pp better than the TOPCon 600-650W median of 22.8%
  • 234.5 W/m² power density - 6.8 W/m² more than TOPCon 600-650W median (227.7 W/m²), more power per roof area
  • Temperature coefficient of -0.29%/°C matches the TOPCon 600-650W median
  • Weight of 31.5 kg (1.2 kg below TOPCon 600-650W median of 32.7 kg) allows easier transport and roof mounting
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface

Specifications

Open datasheet PDF
Nominal power (Pmax) 605 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.45 % Strong Segment median 22.80%
Vmpp · Impp 44.62 V · 13.58 A Operating point at max power
Voc · Isc 53.30 V · 14.46 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2277×1133×35 mm · 2.58 m² of roof
Weight 31.5 kg Typical Typical · median 32.7 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.292 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.276 · 0.057 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.292 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Renewsys DESERV Extreme 144X-605 605 W 23.45% -0.292 31.5 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +45 W, lighter, +1.8 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +40 W, lighter, +1.6 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg -45 W, lighter, +1.4 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +35 W, lighter, +1.4 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -50 W, lighter, +1.2 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg Cooler, lighter, +1.2 pp
DESERV Extreme 144X-565 565 W 21.90% -0.292 31.5 kg -40 W, -1.6 pp
DESERV Extreme 144X-570 570 W 22.09% -0.292 31.5 kg -35 W, -1.4 pp
DESERV Extreme 144X-575 575 W 22.29% -0.292 31.5 kg -30 W, -1.2 pp
DESERV Extreme 144X-580 580 W 22.48% -0.292 31.5 kg -25 W, -1.0 pp
DESERV Extreme 144X-585 585 W 22.68% -0.292 31.5 kg -20 W, -0.8 pp
DESERV Extreme 144X-590 590 W 22.87% -0.292 31.5 kg -15 W, -0.6 pp
DESERV Extreme 144X-595 595 W 23.06% -0.292 31.5 kg -10 W, -0.4 pp
DESERV Extreme 144X-600 600 W 23.26% -0.292 31.5 kg Very close match
DESERV Extreme 144X-610 610 W 23.64% -0.292 31.5 kg Very close match
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +25 W, cooler, +0.9 pp

Found 2321 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2550 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How much power does the DESERV Extreme 144X M10R TOPCon panel generate thanks to bifacial technology?
The panel delivers up to 610 Wp of nominal power from the front side, and thanks to its dual-glass, bifacial design it also generates additional energy from the rear side using light reflected off the surrounding surface. With a bright ground surface or roof, energy yield can increase by up to several percent compared to a classic monofacial panel of the same power.
How does the TOPCon cell differ from classic PERC cells in this RenewSys series?
The n-type TOPCon cells used in DESERV Extreme offer higher conversion efficiency and lower power losses than older p-type PERC cells. TOPCon technology also features significantly lower LID and LeTID degradation, resulting in more stable energy production throughout the system's lifetime, especially noticeable after several years of operation.
What warranty comes with the DESERV Extreme 144X M10R panels and what does it cover?
RenewSys provides a 12-year product warranty covering material and manufacturing defects, plus a 30-year linear power warranty guaranteeing a minimum output level over time. This is a standard offering typical of tier 1 manufacturers, giving investors confidence in the long-term profitability of their PV investment.
Is the dual-glass construction of this panel more durable than a standard glass-backsheet design?
Yes, the glass-glass construction offers better sealing and resistance to moisture, microcracks, and material degradation compared to panels with a rear polymer backsheet. This makes the module more resilient to harsh weather conditions, extends its lifespan, and lowers annual degradation, which reduces LCOE over the full lifetime of the installation.
Where does the bifacial DESERV Extreme panel perform best - on a roof or in a solar farm?
The panel achieves its full potential in ground-mounted solar farms and on flat roofs with a bright surface, such as white gravel or a reflective roofing membrane, since these surfaces reflect more light onto the rear side of the module. On sloped roofs with dark coverings, the bifacial gain will be less pronounced, though the module still delivers high efficiency thanks to TOPCon technology.
Is RenewSys a tier 1 manufacturer and where are its panels made?
Yes, RenewSys holds tier 1 manufacturer status, reflecting financial stability and a proven track record in large-scale PV projects. The company is headquartered in India and is one of the leading Asian PV module manufacturers, supplying components to both the domestic Indian market and export markets, including Europe.
Add to compare