Middle of its segment, modest efficiency
The Renesola RS6-550~560MBG-E3 series are modules designed for high energy production in areas where every square meter of roof or structure counts. The use of bifacial construction with double glass allows for better utilization of reflected light from the ground, which improves yields in ground-mounted, flat-roof, and membrane/gravel systems. Thanks to monocrystalline cells and a refined connection architecture, the module operates reliably in varying conditions, and low temperature losses support performance on hot days. In practice, it solves typical investor problems: limited mounting area, the desire to maximize self-consumption, and the need for predictable performance over many years. An additional advantage is a long linear warranty on output, which improves the security of calculations in commercial projects. This is a sensible choice for companies, PV farms, and demanding prosumer installations, where competition often offers less durable construction or shorter parameter guarantees.
Ranking
Signals from the data
Commercial, utility-scale, residential and hot-climate.
Tight roof space, weight-limited structures and roofs where every square metre has to count.
Bottom 2% of the N-type 550-600 W segment, against a median of 22.45%. Ranked 8,708th in the whole database.
Bottom 2% of the N-type 550-600 W segment, against a median of 52.3. Ranked 11,322nd in the whole database.
Bottom 2% of the N-type 550-600 W segment, against a median of 224.5. Ranked 8,497th in the whole database.
N-type technology eliminates the LID (Light Induced Degradation) effect typical of PERC cells and offers a lower power temperature coefficient, translating into higher annual energy yield compared to older P-type modules, especially in hot climates.
The dual-glass bifacial design captures light reflected from the ground (albedo), which in ground-mount installations, flat roofs, and light-colored membranes can boost yield by several to over a dozen percent compared to a monofacial module of the same rated power.
Renesola offers a 30-year product power warranty, exceeding the standard 25 years offered by many peer competitors (e.g., Exiom, Fellow Energy, Premier Energies), improving LCOE calculation security for commercial projects and PV farms.
Efficiency of 21.29-21.68% is directly comparable to top competitors (Exiom 21.7%, Fellow Energy 21.7%, Premier Energies 21.67%), confirming the series doesn't lag technologically behind the leading bifacial N-type module makers.
Renesola is a tier-1 (bankable) manufacturer, operating since 2005, which facilitates project financing through banks and leasing institutions and increases confidence in long-term warranty fulfillment.
The product warranty is 12 years, while many premium-segment leaders (including some comparable bifacial N-type modules) now standardly offer 15 years against material and workmanship defects, which competitors could use as a selling point.
- Efficiency of 21.3% is 1.2pp below the N-type 550-600W median (22.4%)
- Power density of 212.9 W/m² is 11.6 W/m² below N-type 550-600W median (224.5 W/m²) - needs more roof space
- -0.35%/°C temperature coefficient - 0.06pp worse than N-type 550-600W median (-0.29%/°C), expect higher hot weather losses
- At 31.7 kg (2.2 kg above N-type 550-600W median of 29.5 kg), requires checking roof load capacity
- #8708 for efficiency, #10419 for temperature performance out of 14005 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here