Middle of its segment, short guarantee
The REC Alpha Pure 2 series is a breakthrough solution based on advanced heterojunction cells (HJT), which set new efficiency standards in the Polish micro-installation sector. Thanks to an innovative cell layout and the elimination of unnecessary gaps, these panels offer maximum power density, allowing for significantly more energy generation from limited roof space. It is one of the few options on the market distinguished by a completely lead-free construction, making it an eco-friendly choice that meets strict environmental standards. The applied Twin Design technology, which divides the module into two independent sections, effectively solves the problem of production drops in partial shading conditions, setting this series apart from standard competitor solutions. Exceptional durability is ensured by additional frame reinforcements, protecting components from extreme wind pressure or heavy snow loads. The product is dedicated to demanding homeowners and businesses that value unique Full Black aesthetics combined with the highest cell performance in high temperatures. Investing in this series is a guarantee of long-term energy stability and security, backed by one of the strongest warranty coverages in the photovoltaic industry.
Ranking
Signals from the data
Residential, commercial, shaded-installations and hot-climate.
Owners who want a long output guarantee.
Bottom 8% of the HJT 400-450 W segment, against a median of 30 yrs. Ranked 9,798th in the whole database.
Efficiency up to 22.2% exceeds comparable series in this dataset: Silfab Elite (21.9%), EGing STAR Pro (22.02%), and Boviet GAMMA (19.8%). For the same roof area, the installation generates real more energy than competing tier-1 panels.
Heterojunction (HJT) cells in a fully lead-free construction are rare in the microinstallation segment, meeting stringent RoHS environmental standards. A low temperature coefficient of -0.24%/°C means smaller power losses on hot days compared to PERC panels (typically -0.35% to -0.45%/°C).
The manufacturer guarantees at least 92% of nameplate power after 25 years of operation, with annual degradation of only 0.25%. This outperforms the standard power warranty of most tier-1 peers in this segment, where 25-year guaranteed output is typically around 84-87%.
The REC Alpha Pure 2's bifaciality factor reaches 70-90%, which, with proper mounting (e.g., on a light-colored surface), can increase total energy output by an additional 5-15% compared to monofacial panels.
Splitting the module into two independent electrical sections limits production drops under partial shading (e.g., leaves, chimney, antenna), setting the series apart from standard panels with a single cell string.
Installed cost for the Alpha Pure series is estimated at $3.10-3.55/W, roughly $0.30-0.50/W higher than mainstream panels. The HJT premium may not pay off in a budget-constrained typical prosumer installation despite the higher efficiency.
- At 22.2% efficiency, this panel is on par with typical HJT 400-450W modules
- Power density of 221.7 W/m² matches the HJT 400-450W median
- At -0.24%/°C, hot weather performance is typical for HJT 400-450W panels
- At 21.7 kg, this panel is 1.3 kg lighter than HJT 400-450W median (23.0 kg) - easier handling during installation
- #5817 for efficiency, #13 for temperature performance out of 14005 panels
Specifications
Datasheet charts
Measured curves published by REC in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 430 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 9 panels of the same or similar size to this one, within ±10 mm. See them here Found 43 panels of the same or similar size to this one, within ±25 mm. See them here Found 96 panels of the same or similar size to this one, within ±50 mm. See them here Found 1916 panels of the same or similar size to this one, within ±100 mm. See them here