Skip to main content

MY Solar MS565N-DHBA

565 Wp TOPCon Bifacial 85%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 3,056 of 14,129
Compare panels Datasheet PDF
Power (Wp)
565
Weak · bottom 18%
Efficiency (%)
21.90
Weak · bottom 22%
Density (Wp/m²)
218.7
Weak · bottom 20%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
31.8
Weak · bottom 16%
Warranty (yrs)
30
Typical · median 30 yrs

The MY Solar ALTRA N-Type TOPCon Bifacial (Dual-glass framed, N144) series are modules designed for maximum energy yield in situations where every percentage counts - especially for ground-mounted and PV farm installations. A key advantage is the combination of N-Type TOPCon cells with a dual-sided (bifacial) design, allowing the panel to not only generate power from the front but also to effectively utilize reflected light from the ground (albedo). This translates to higher yields on the same surface area and improved project profitability.

The use of double-glass enhances resistance to environmental conditions and reduces the risk of degradation over the long term - a crucial factor for investments spanning decades. The half-cut and multi-busbar technology helps minimize losses and improve stability under less-than-ideal sunlight conditions. An additional advantage is salt and ammonia resistance, making installation easier in coastal, agricultural, and high-humidity areas. This is a choice for investors, EPC companies, and firms that want to extract maximum energy from the same BoS infrastructure.

Ranking

1,022 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.90% 22.44% Weak · bottom 22% 6,847
Power density 218.7 224.4 Weak · bottom 20% 6,904
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 56.3 53.8 Weak · bottom 16% 10,628
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 6 caution
Best for

Utility-scale, commercial and shaded-installations.

Not ideal for

Weight-limited structures, roofs where every square metre has to count and tight roof space.

Watch-outs
56.3 kg per kWp

Bottom 16% of the TOPCon 550-600 W segment, against a median of 53.8.

218.7 watts per square metre

Bottom 20% of the TOPCon 550-600 W segment, against a median of 224.4.

21.90% module efficiency

Bottom 22% of the TOPCon 550-600 W segment, against a median of 22.44%.

What owners get
Efficiency matching segment leaders

Up to 22.65% efficiency in top-bin variants matches the best peer comparables (Hanersun Hitouch 5N, Q-SUN Qrystal N8) - the upper limit currently available for N144 TOPCon technology on the market.

N-Type TOPCon + dual-glass bifacial design

Combining N-Type cells (lower LID/LeTID degradation than PERC) with a bifacial dual-glass construction meaningfully boosts energy yield on ground-mount installations by capturing albedo light reflected from the ground.

25-year product warranty

A full 25-year product warranty paired with a 30-year power warranty matches premium-segment standards - many tier-2 manufacturers offer only 10-15 years of product warranty alongside a comparable power warranty.

Salt and ammonia resistance

Certified corrosion resistance enables installation in coastal, agricultural, and high-humidity zones without additional protective measures or special module variants.

Half-cut cells and multi-busbar technology

Half-cut cells with multiple busbars reduce resistive losses and improve performance stability under partial shading, which matters on large ground-mount farms with uneven irradiance.

Trade-offs
No Tier-1 (BNEF) status

MY Solar does not appear on BloombergNEF's Tier-1 manufacturer list, which can complicate non-recourse bank financing for large-scale farm projects - unlike peer comparables such as Risen, which do hold Tier-1 status.

Wide efficiency spread within the series

Efficiency ranges from 21.9% to 22.65% depending on the variant (565-585W), while comparable competitor series (Hanersun, Q-SUN) achieve 22.65% across nearly their entire power range - the lower-end ALTRA variants clearly trail the segment leaders.

Limited market track record

Released in 2022, the series has roughly 4 years of market presence, limiting the availability of long-term field-performance data to support the claimed 30-year power warranty compared to manufacturers with a longer track record.

Notes from the database
  • Efficiency of 21.9% is 0.5pp below the TOPCon 550-600W median (22.4%)
  • 218.7 W/m² power density is 5.7 W/m² below TOPCon 550-600W median (224.4 W/m²) - requires larger installation area
  • At -0.29%/°C, hot weather performance is typical for TOPCon 550-600W panels
  • Bifaciality factor of 85% can add 4-13% extra yield with reflective mounting surface
  • #6847 for efficiency, #2220 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 565 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.90 % Weak Segment median 22.44%
Vmpp · Impp 41.92 V · 13.48 A Operating point at max power
Voc · Isc 51.60 V · 14.92 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1134×30 mm · 2.58 m² of roof
Weight 31.8 kg Weak Weak · bottom 16%
Cells 144 · TOPCon Monocrystalline
Bifaciality 85 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 25 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs

Datasheet charts

Open datasheet PDF

Measured curves published by MY Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 565 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All MY Solar panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
MY Solar MS565N-DHBA 565 W 21.90% -0.290 31.8 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.9 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +2.7 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg Cooler, 16 kg lighter, +2.5 pp
JAT60S40-540/LR 540 W 24.40% -0.260 23.5 kg Cooler, lighter, +2.5 pp
GK-5-60HG-540M 540 W 24.40% -0.260 23.3 kg Cooler, lighter, +2.5 pp
JKM545-54QL6-DV-F1-EU 545 W 24.27% -0.260 27.5 kg Cooler, lighter, +2.4 pp
LR7-60HVH-545M 545 W 24.20% -0.260 25.0 kg Cooler, lighter, +2.3 pp
MS570N-DHBA 570 W 22.10% -0.290 31.8 kg +0.2 pp
MS575N-DHBA 575 W 22.30% -0.290 31.8 kg +10 W, +0.4 pp
MS580N-DHBA 580 W 22.45% -0.290 31.8 kg +15 W, +0.6 pp
MS585N-DHBA 585 W 22.65% -0.290 31.8 kg +20 W, +0.8 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +85 W, lighter, +3.3 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +80 W, lighter, +3.1 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +75 W, lighter, +2.9 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +70 W, lighter, +2.7 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +65 W, cooler, +2.5 pp

Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2548 panels of the same or similar size to this one, within ±100 mm. See them here

About the ALTRA N-Type TOPCon Bifacial (Dual-glass framed, N144) series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the peak power output of the MY Solar ALTRA N144 module, and what applications is it designed for?
MY Solar ALTRA N144 modules reach a peak output of 585 Wp. With high per-unit power and a bifacial structure, these panels are primarily intended for ground-mounted and commercial PV farms where maximizing energy yield per unit area and efficient BoS logistics directly reduce the project's LCOE.
What is N-Type TOPCon technology and how does it differ from standard PERC cells in the MY Solar ALTRA series?
TOPCon N-Type cells feature an additional passivation layer - tunnel oxide and polysilicon - that reduces carrier recombination and enables higher efficiency than conventional PERC. In practice, MY Solar ALTRA panels generate more energy from the same footprint, perform better at high temperatures, and exhibit a lower annual degradation rate. This technology is widely adopted in utility-scale PV farms targeting low LCOE.
How much additional energy can I expect from the bifacial design of MY Solar ALTRA N144 panels?
Rear-side energy gain depends on ground albedo and module clearance height. On reflective surfaces such as gravel, concrete, or snow, bifacial gain typically ranges from 5 to 15% compared to monofacial modules. MY Solar ALTRA panels maximize this effect in ground-mounted installations where adequate clearance and bright ground cover enhance reflected irradiance capture.
What product and power warranties do MY Solar ALTRA N-Type TOPCon panels carry?
The MY Solar ALTRA series comes with a 25-year product warranty covering material and workmanship defects, and a 30-year linear power warranty. This long-term coverage gives investors confidence that panels will meet their declared output parameters for three decades, which is critical when calculating ROI and LCOE for PV farm projects.
Are MY Solar ALTRA panels suitable for coastal or agricultural installations?
Yes. The ALTRA series is certified for salt and ammonia resistance, making it well-suited for coastal sites exposed to salt spray and agricultural environments with elevated ammonia levels, such as livestock farms and biogas plants. The dual-glass (glass-glass) construction also provides superior moisture ingress protection compared to conventional backsheet modules.
Why does the MY Solar ALTRA series use a glass-glass (dual-glass) construction instead of a standard backsheet?
The glass-glass design replaces the rear polymer backsheet with a second tempered glass pane, delivering higher mechanical strength, a better moisture barrier, and lower susceptibility to PID (Potential Induced Degradation). As a result, MY Solar ALTRA modules degrade more slowly under harsh climatic conditions, which is especially important over the 30-year operational horizon typical for utility-scale PV farms.
Add to compare