Space saver, no clear weak spot
Jinko Solar Cheetah HC 60M-V panels are an advanced solution based on half-cell technology, which significantly improves installation efficiency in difficult lighting conditions. Thanks to the use of Half-Cut technology, these modules exhibit significantly lower power losses resulting from internal resistance and are more resistant to the negative effects of partial shading. This series uses monocrystalline PERC cells, which translates into an excellent temperature coefficient and stable operation even during hot days. A key differentiator is the high resistance to potential-induced degradation (Anti-PID), which guarantees longevity and the preservation of declared parameters over many years of operation. Cheetah HC 60M-V models are an ideal choice for investors looking for the perfect balance between price and innovation. The optimized frame design allows for safe installation in locations exposed to strong wind and snow loads, making them a universal solution for Polish residential micro-installations and commercial farms. By choosing this series, the user receives a product that, thanks to the reduced risk of micro-cracks and better energy management in low sunlight, offers a faster return on investment compared to standard full-cell modules. It is a solid foundation for a modern PV system, combining reliability with modern cell architecture.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Top 17% of the PERC 300-350 W segment, against a median of 190.0.
Top 17% of the PERC 300-350 W segment, against a median of 19.00%.
Top 20% of the PERC 300-350 W segment, against a median of 60.3.
Splitting cells in half halves the operating current, reducing resistive losses and improving partial-shading tolerance. The 5-busbar design shortens current paths within each cell, enabling the Cheetah HC 60M-V series to reach up to 20.45% efficiency - matching the top peer comparables: JA Solar M3 series and Solar N Plus AP1 (both max 20.45%).
JinkoSolar is the only manufacturer to achieve 100% bankability in the Bloomberg BNEF PV Module Bankability Survey 2024, holding the #1 position for 10 consecutive years. Tier-1 status ensures full acceptance by project finance institutions and minimizes counterparty risk on service and warranty contracts.
The module is TÜV NORD certified for 2,400 Pa wind load and 5,400 Pa snow load (approximately 550 kg/m²). Certifications also cover salt mist and ammonia resistance, enabling installation in marine, agricultural, and industrial environments without voiding the warranty.
A Pmax temperature coefficient of -0.35%/°C sits at the upper end for mono PERC technology, limiting power loss during hot weather. At a cell temperature of 45°C the module loses approximately 3.5% of rated power - less than typical polycrystalline panels (-0.40 to -0.45%/°C).
Built-in protection against potential-induced degradation (PID) is essential for 1,000 V and 1,500 V systems, particularly with negative-ground configurations. Combined with TÜV NORD salt mist and ammonia certification, it supports stable output parameters throughout the 25-year linear power warranty period.
The Cheetah HC 60M-V is a 2019-vintage series with production already ended. Limited availability of new modules makes system expansion with an identical model difficult (mismatch risk), and the service network for this generation is gradually shrinking. In warranty claims, the manufacturer may substitute a newer-generation module with different electrical characteristics.
By 2026, N-type TOPCon accounts for approximately 80% of newly installed global cell production capacity. PERC cells degrade at 0.50-0.55%/year versus 0.35-0.40% for TOPCon and remain susceptible to first-year LID/LeTID losses. Over a 25-year horizon this translates to measurably lower cumulative energy yield and higher LCOE compared with modern N-type modules.
The 12-year product warranty falls below the 15-year standard that has become the market norm in 2026 among Tier-1 manufacturers (including JA Solar and Trina Solar). The shorter coverage period increases potential out-of-pocket replacement costs for defective modules during years 8-15 of system operation.
The Cheetah HC 60M-V is a monofacial module - the rear side produces no energy from reflected irradiance. Modern bifacial modules in the same front-side power class (325-345 Wp) achieve 5-15% higher annual energy yield on typical ground surfaces (albedo 20-40%), a gain that can offset the bifacial price premium over a 25-year system lifetime.
- At 19.9% efficiency, this panel is on par with typical PERC 0-400W modules
- 198.5 W/m² power density - 4.3 W/m² more than PERC 0-400W median (194.2 W/m²), more power per roof area
- At -0.36%/°C, hot weather performance is typical for PERC 0-400W panels
- 19.0 kg weight - 1.5 kg lighter than PERC 0-400W median (20.5 kg), reducing installation effort
- In the top 88% for efficiency among all PERC panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 114 panels of the same or similar size to this one, within ±10 mm. See them here Found 224 panels of the same or similar size to this one, within ±25 mm. See them here Found 470 panels of the same or similar size to this one, within ±50 mm. See them here Found 814 panels of the same or similar size to this one, within ±100 mm. See them here
About the Cheetah HC 60M-V series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.