Solid all-round for its segment
JA Solar photovoltaic panels from the JAM60S20 370-395/MR series are an advanced solution based on PERC-type monocrystalline cells, which has been optimized for maximum efficiency in real operating conditions. The key distinguishing feature of this series is half-cut cell technology, which effectively reduces energy losses resulting from internal resistance and improves the temperature stability of the module. Thanks to the use of Multi-busbar (MBB) construction, these panels are characterized by increased resistance to micro-cracks and better current flow, which directly translates into a longer lifespan for the entire installation. This series perfectly solves the problem of partial shading - the split module design means that the lower part can work independently when the upper part remains in the shade. It is a product dedicated to investors looking for a middle ground between high quality and a reasonable price, performing perfectly in both residential micro-installations and on commercial roofs. Compared to the competition, the JAM60S20 stands out with its high resistance to mechanical loads and an excellent power temperature coefficient, which guarantees stable energy yields even during hot days. It is a solid foundation for any PV system, focusing on proven technical innovations.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
The 120 half-cut cell layout reduces I²R resistive losses by roughly 50% compared to full-cell modules, lowers hot-spot risk, and improves micro-crack resistance. The bottom half of the module continues generating power when the top half is shaded, delivering higher annual energy yield under real-world partial-shading conditions.
The efficiency range clearly outperforms the directly comparable Waaree EDO PRO (19.83%) and far exceeds the HT-SAAE HT48-18X(ND) TOPCon module (15.4%). The gap to the segment leader Meyer Burger Black (21.5%) is at most 0.3 percentage points, typically at a significantly lower purchase price.
Modules are certified for snow loads up to 5,400 Pa (≈550 kg/m²) and wind loads up to 2,400 Pa, qualifying them for demanding installation environments: flat roofs, alpine zones, and high-snowfall regions. These ratings exceed typical requirements for residential PV installations.
JA Solar (founded 2005) has held BNEF Tier-1 status continuously for years, with annual shipments exceeding 80 GW and manufacturing capacity of 100 GWp. Bankable status facilitates project finance from lending institutions and minimizes counterparty risk — critical for commercial installations with 20–25-year payback horizons.
The Pmax temperature coefficient of –0.35%/°C outperforms the –0.40%/°C typical of older polycrystalline modules. At a realistic cell temperature of 65°C, the power loss relative to STC is approximately 14%, ensuring stable energy production on hot summer days.
The JAM60S20 series, launched in 2020, has been discontinued. Availability of new units at major distributors is limited or zero, making it impossible to expand an existing installation with identical modules. The absence of active OEM technical support for this product line increases operational risk for post-2025 servicing.
P-type PERC cells are susceptible to LID (Light Induced Degradation), which is absent in N-type TOPCon and HJT cells. PERC annual degradation rates typically run 0.50–0.55%/yr versus ~0.40%/yr for TOPCon; over 25 years that translates to roughly 2.5–3.75 pp lower power retention. The market has clearly shifted toward N-type technology.
The 12-year workmanship warranty matched the minimum industry standard at the time of the 2020 launch. Newer premium series (Meyer Burger Black: 25 years; rising Tier-1 standard: 15 years) provide significantly longer coverage — an important consideration for commercial projects with planned operating lives of 20–25 years.
- At 20.2% efficiency, this panel is 0.8pp above typical PERC 0-400W modules (median: 19.4%)
- Power density of 201.5 W/m² packs 7.1 W/m² more into the same footprint vs PERC 0-400W median (194.4 W/m²)
- At -0.35%/°C, hot weather performance is typical for PERC 0-400W panels
- #11956 for efficiency, #10419 for temperature performance out of 14005 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 74 panels of the same or similar size to this one, within ±10 mm. See them here Found 287 panels of the same or similar size to this one, within ±25 mm. See them here Found 402 panels of the same or similar size to this one, within ±50 mm. See them here Found 4178 panels of the same or similar size to this one, within ±100 mm. See them here