Space saver, short guarantee
The Hanersun Hitouch 5 (HN18-72H) series is designed for installations where high energy production is a priority, while maintaining practical compatibility with popular mounting systems and logistics. The modules utilize MONO PERC cells in combination with a half-cut design and MBB technology, which helps to minimize losses and improve performance under partial shading. A key feature is the high-density encapsulation with minimal spacing between cells - this results in better use of the active surface area and more stable operation in real-world conditions.
The HN18-72H variant is suitable for both residential installations on pitched and flat roofs, as well as larger commercial projects where repeatability of parameters and reliability are important. An additional advantage is the reduced risk of hot spots and solutions that increase yield from the same surface area, which makes project optimization easier without the need to "over-engineer" the installation.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Owners who want a long output guarantee.
Top 8% of the PERC 550-600 W segment, against a median of 212.9. Ranked 7,452nd in the whole database.
Top 10% of the PERC 550-600 W segment, against a median of 21.29%.
Bottom 24% of the PERC 550-600 W segment, against a median of 27 yrs.
The maximum efficiency of 21.68% is virtually identical to that of direct peers: Exiom EX540-560M at 21.7%, Premier Energies PERC bifacial at 21.67%, and DAH Solar DHM-T72X10 at 21.72%. The series matches the competition on the parameter that matters most to system designers.
The combination of half-cut cells (reducing resistive losses by ~50% versus full cells), multi-busbar technology, and minimized inter-cell spacing lowers the risk of hot spots and improves yield under partial shading — identified in the manufacturer's datasheet as a core design objective of the series.
The manufacturer guarantees >84.8% of nominal power output after 25 years, with annual degradation not exceeding 0.4%. This is the standard specification for the medium-premium PERC segment and is consistent with what peer-comparable modules in the same power class offer.
The module is certified for snow loads of 5,400 Pa and wind loads of 2,400 Pa, allowing deployment in demanding climatic conditions without requiring additional reinforcement of the mounting structure.
The standard 182 mm cell format ensures full compatibility with the majority of widely used racking systems and inverters available on the European market, simplifying logistics and module replacement.
Production of the Hitouch 5 series (HN18-72H) ended in 2023. New modules are available only from existing warehouse stock; over the 25-year power warranty horizon, this increases the risk of inadequate service support and the inability to source identical modules when expanding an installation.
Two of the three direct peers — the DAH Solar DHM-T72X10/BF/FS and the Premier Energies 144 HC PERC Bifacial — offer a bifacial variant with a potential additional yield of 5–25% depending on ground albedo. On installations with high-albedo surfaces (gravel, concrete, snow), this series surrenders a measurable productivity advantage.
Hanersun launched the Hitouch 5N series (TOPCon) as early as 2022, with a maximum efficiency of 23.2% and a lower LID degradation rate. At a comparable price point, selecting new TOPCon modules is technically justified by higher annual energy yield and longer cell lifetime.
- At 21.7% efficiency, this panel is on par with typical PERC 550-600W modules
- Power density of 216.8 W/m² packs 3.9 W/m² more into the same footprint vs PERC 550-600W median (212.9 W/m²)
- Temperature coefficient of -0.35%/°C matches the PERC 550-600W median
- 28.5 kg weight - 2.3 kg lighter than PERC 550-600W median (30.8 kg), reducing installation effort
- #7542 for efficiency, #10419 for temperature performance out of 14005 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2547 panels of the same or similar size to this one, within ±100 mm. See them here