Skip to main content

GS10-T108-GF-430

430 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 10,102 of 14,005
Compare panels Datasheet PDF
Power (Wp)
430
Typical for its class
Efficiency (%)
21.91
Typical · median 22.00%
Density (Wp/m²)
219.2
Typical · median 220.2
Temp (%/°C)
-0.300
Typical · median -0.290
Weight (kg)
22.0
Typical · median 22.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Goldi Solar GS10-T108-GF series consists of modules designed to maximize energy yield from every square meter of installation - whether on a rooftop or in ground-mounted systems. The use of N-type monocrystalline cells in TOPCon technology ensures stable performance over a long period and better energy utilization, even in less sunny conditions. The bifacial design allows for additional "collection" of reflected light from the ground, which effectively supports energy production in installations on sunny roofs, ground, or carports.

The model also features low temperature sensitivity, resulting in smaller performance drops in the summer compared to many standard modules. For installers and investors, the extended power output warranty is a key advantage, making it easier to plan the project's profitability over the long term.

The GS10-T108-GF is a good choice for homes, businesses, and PV farms where reliable technology, consistent quality, and high efficiency are paramount.

Ranking

1,218 panels in the segment TOPCon 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.91% 22.00% Typical 6,770
Power density 219.2 220.2 Typical 6,737
Temperature coefficient -0.300 -0.290 Typical 6,093
Weight per kWp 51.2 51.4 Typical 4,522
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 1 caution
Best for

Residential, commercial and hot-climate.

What owners get
N-type TOPCon Cells – Reduced LID Degradation

TOPCon technology based on N-type silicon eliminates the Light-Induced Degradation (LID) effect characteristic of older P-type PERC cells. This translates to higher real-world annual energy yield and more stable performance throughout the full warranty period, as confirmed by independent testing from PV Evolution Labs and TÜV Rheinland.

Bifacial Design – Additional Rear-Side Energy Yield

Dual-sided light absorption allows the module to harvest energy reflected from the ground surface. In ground-mount and carport installations with light-colored or gravel substrates, bifacial gain realistically reaches 5–15% relative vs. monofacial. At a nominal power rating of 415–435 Wp, this translates to an effective yield of up to approximately 500 Wp with no additional equipment costs.

30-Year Linear Power Output Warranty

The manufacturer offers a 30-year linear power output warranty — the standard for N-type TOPCon modules (including JA Solar, LONGi, and Jinko Tiger Neo). The extended warranty horizon simplifies project DCF analysis and improves investment bankability compared to PERC modules, which typically carry only a 25-year power warranty.

Tier-1 Bankable Manufacturer per BNEF

Goldi Solar (founded 2011, HQ India) appears on the Bloomberg New Energy Finance Bankable Tier 1 list, meaning non-recourse project financing backed by these modules is accessible through at least six independent banks. This reduces credit risk and facilitates debt financing for utility-scale PV projects.

Up to 22.17% Efficiency in 108-Cell Format

A peak efficiency of 22.17% in the compact 108-cell format delivers high power density per m², which is critical in roof space-constrained applications. The series remains highly competitive among comparable 108-cell products (peers: Luxen N5 – 22.28%, ZNShine ZXM7 – 22.28%), trailing segment leaders by only 0.11 percentage points.

Trade-offs
12-Year Product Warranty – Below TOPCon Segment Leaders

As N-type TOPCon technology matures, a growing number of leading manufacturers now offer 25-year product warranties (LONGi Hi-MO 6, Jinko Tiger Neo, JA Deep Blue 4.0 Pro, Canadian Solar TOPHiKu6). The GS10-T108-GF carries a 12-year product warranty — mid-tier segment standard, not premium. For projects with a financing horizon exceeding 15 years, this may be a meaningful competitive disadvantage in tender evaluations.

Notes from the database
  • At 21.9% efficiency, this panel is on par with typical TOPCon 400-450W modules
  • At 219.2 W/m² power density, roof space requirements are typical for TOPCon 400-450W panels
  • Temperature coefficient of -0.30%/°C matches the TOPCon 400-450W median
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • #6770 for efficiency, #6093 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 430 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.91 % Typical Segment median 22.00%
Vmpp · Impp 31.87 V · 13.50 A Operating point at max power
Voc · Isc 38.48 V · 14.24 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1730×1134×30 mm · 1.96 m² of roof
Weight 22.0 kg Typical Typical · median 22.0 kg
Cells 108 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 376 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Goldi Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 430 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All Goldi Solar panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Goldi Solar GS10-T108-GF-430 430 W 21.91% -0.300 22.0 kg You are here
AIKO-A480-MAH54Mw 480 W 24.10% -0.260 21.5 kg +50 W, cooler, +2.2 pp
GK-5-54HG-480M 480 W 24.10% -0.260 21.0 kg +50 W, cooler, +2.2 pp
JKM480N-48QL6-DB-F2-EU 480 W 24.02% -0.260 24.4 kg +50 W, cooler, +2.1 pp
GKA96N-PRO-480W 480 W 24.02% -0.300 21.0 kg +50 W, lighter, +2.1 pp
GS10-B108-BF-390 390 W 19.90% -0.350 21.0 kg Hotter, -2.0 pp, -5 yr warranty
GS10-B108-GF-395 395 W 20.15% -0.320 22.0 kg -35 W, hotter, -1.8 pp
GS10-B108-BF-400 400 W 20.40% -0.350 21.0 kg Hotter, -1.5 pp, -5 yr warranty
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +80 W, cooler, +3.1 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +65 W, cooler, +2.9 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +75 W, cooler, +2.8 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +60 W, cooler, +2.6 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +70 W, cooler, +2.6 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +70 W, cooler, +2.6 pp

Found 1769 panels of the same or similar size to this one, within ±10 mm. See them here Found 1924 panels of the same or similar size to this one, within ±25 mm. See them here Found 3392 panels of the same or similar size to this one, within ±50 mm. See them here Found 3970 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Goldi Solar GS10-T108-GF series come with?
The GS10-T108-GF series includes a 12-year product warranty and a 30-year linear power output warranty. Such an extended power guarantee makes it straightforward to project the financial return of a residential or commercial installation over the long term and confirms the manufacturer's confidence in the stated performance parameters.
What is TOPCon technology and why does it matter in the GS10-T108-GF series?
TOPCon (Tunnel Oxide Passivated Contact) is an advanced N-type monocrystalline cell technology that delivers higher efficiency and lower long-term degradation compared to conventional PERC modules. In the GS10-T108-GF, this translates to better energy yield under low-irradiance conditions such as overcast days and more stable output throughout the system's lifetime.
Are the GS10-T108-GF panels bifacial, and when does that actually make a difference?
Yes, the GS10-T108-GF modules feature a bifacial design that captures light from both the front and rear surfaces. The rear-side gain is most significant in ground-mount systems on light-colored ground cover, carports, or flat roofs with white membranes. On typical pitched roofs with dark tiles, the bifacial contribution is minimal.
How do the Goldi Solar GS10-T108-GF panels perform during summer heat?
N-type TOPCon cells have a more favorable temperature coefficient than standard PERC modules, meaning power losses during hot, sunny days are lower. For installations in Central Europe, this can translate to a few percentage points of additional yield at peak summer irradiance compared to older cell technologies.
Is Goldi Solar a reliable manufacturer and is the GS10-T108-GF series still available?
Goldi Solar is an Indian Tier 1 manufacturer recognized for consistent production quality and bankability, which simplifies project financing. The GS10-T108-GF series remains an active product line and has not been discontinued, so it is currently available through authorized distribution channels.
What types of installations are the Goldi Solar GS10-T108-GF 435 Wp modules best suited for?
With 435 Wp peak power, TOPCon cell technology, and a bifacial design, the GS10-T108-GF is well suited for residential rooftop systems, commercial flat-roof installations, ground-mount utility projects, and agrivoltaic applications. The 108-cell layout offers good flexibility for matching various roof dimensions and racking configurations.
Add to compare