Solid all-round for its segment
GCL NT10/72GDF photovoltaic panels are an advanced solution based on N-type TOPCon technology, setting new efficiency standards in large-scale installations. Thanks to the use of N-type cells, these modules are characterized by near-zero light-induced degradation and excellent efficiency in low sunlight. The bifacial dual-glass construction allows for the effective use of light reflected from the ground, which significantly increases total energy generation compared to standard, single-sided counterparts. The use of large silicon wafers translates into system cost optimization, which is crucial for investors seeking a maximum return on investment. This series effectively eliminates the problem of rapid power loss over time, offering exceptional parameter stability over decades of operation. It is a product dedicated primarily to professional photovoltaic farms and large commercial facilities, where every kilowatt-hour of yield and durability in variable weather conditions count. What distinguishes them from the competition is the precise combination of high power density with a low temperature coefficient, which ensures that the modules work stably even during hot days. By choosing the GCL NT10/72GDF series, you gain investment certainty based on innovations that realistically shorten the payback period through higher production in a real-world operating environment.
Ranking
Signals from the data
Utility-scale, commercial and hot-climate.
The top variant in the series achieves 23.42% module efficiency, outperforming direct peer comparables (JS Solar JS210MHC120: 21.4%, LEDVANCE M585~605P60UB: 21.37%, Hiwatt HW-M12/120H: 21.4%) by nearly 2 percentage points. In practice, this translates to higher energy yield from the same roof or ground area.
N-type TOPCon technology delivers a Pmax temperature coefficient of -0.29%/°C, compared to the typical -0.35 to -0.38%/°C for PERC modules. At a cell temperature of 65°C - a typical summer scenario in Poland - modules in this series lose approximately 11.6% of rated power, whereas a PERC equivalent would lose 14-15.2%.
LID (Light-Induced Degradation) testing recorded a loss of just -0.33% after 10 kWh/m² of irradiation. N-type technology virtually eliminates boron-oxygen LID, a phenomenon characteristic of P-type (PERC) cells, directly resulting in higher energy yield during the early years of operation.
The manufacturer guarantees ≥87.4% of rated power output after 30 years of operation, with an annual degradation rate of ~0.4%/year after year 1. The dual-glass construction eliminates the risk of frame warping and edge corrosion, supporting long-term parameter stability.
GCL-SI (GCL System Integration) is listed on Bloomberg NEF's Tier 1 roster as one of the world's largest manufacturers (historically ranked #2 by annual production capacity). Tier 1 status is required by lenders for non-recourse financing of PV plants above 1.5 MW, making this module eligible for project finance.
The NT10/72GDF series is no longer in active production - availability is limited to existing distributor inventory. This introduces risk of being unable to expand an installation with identical modules in the future, potential difficulties with warranty replacement units, and limited post-sale support dedicated to this series.
The product warranty stands at 12 years, while current premium N-type series (e.g., Jinko Tiger Neo, LONGi Hi-MO X6) standardly offer 15-year product warranties. For commercial installations and PV farms with a financing horizon of 15-20 years, this may require additional risk analysis by lending institutions.
- At 22.6% efficiency, this panel is on par with typical N-type 550-600W modules
- At 226.5 W/m² power density, roof space requirements are typical for N-type 550-600W panels
- Temperature coefficient of -0.29%/°C matches the N-type 550-600W median
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
- In the top 25% for efficiency among all N-type panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2548 panels of the same or similar size to this one, within ±100 mm. See them here
About the NT10/72GDF series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.