Space saver, no clear weak spot
Gamko New Energy GKA157M series photovoltaic panels utilize advanced monocrystalline cells in PERC technology, which directly translates to high energy conversion efficiency even in diffused light. A key advantage of this line is the use of a Half-Cut design, which divides the module into two independent parts, significantly reducing power losses caused by partial shading and lowering the cell operating temperature. Thanks to this, the user gains more stable electricity production in real operating conditions. The solid construction made of tempered glass and a reinforced frame provides exceptional resistance to extreme mechanical loads, which is critical in the Polish climate characterized by strong gales and snowfall. The GKA157M series solves the problem of long-term component degradation through full protection against the PID effect, guaranteeing consistent electrical parameters for decades. This solution is dedicated to both modern home installations and extensive industrial systems, where the priority is the highest cost-effectiveness ratio. What distinguishes these panels from standard solutions is the optimized temperature coefficient, which minimizes performance drops during summer heat waves, making this series one of the most reliable choices on the photovoltaic market.
Ranking
Signals from the data
Residential, commercial, shaded-installations and hot-climate.
Top 1% of the PERC 300-350 W segment, against a median of 190.0. Ranked 10,267th in the whole database.
Top 1% of the PERC 300-350 W segment, against a median of 19.00%. Ranked 10,148th in the whole database.
Top 16% of the PERC 300-350 W segment, against a median of 25 yrs.
A peak efficiency of 21.13% positions the GKA157M series above the median for the Half-Cut PERC segment (~19.5-20.5%). The half-cut cell architecture reduces resistive losses and mitigates the impact of partial shading - each half of the module operates independently, translating into measurably higher annual energy yield under non-ideal exposure conditions.
The manufacturer guarantees a 30-year performance warranty, exceeding the 25-year standard offered by many mid-tier producers. For residential prosumer and commercial installations with long payback horizons (>15 years), the extended power coverage materially reduces the financial risk associated with long-term degradation.
Built-in resistance to Potential-Induced Degradation is critical in string systems operating at high DC system voltages (up to 1,000 V DC). Eliminating PID removes the scenario in which modules lose 10-30% of rated power after 5-7 years of operation due to ion migration through the laminate.
The series carries IEC 61215 (performance) and IEC 61730 (safety) certifications and, according to ENF Solar data, withstands snow loads of 5,400 Pa and wind loads of 2,400 Pa. Under Polish climatic conditions (snow load zones II-III per PN-EN 1991-1-3), this mechanical rating is a critical parameter for long-term installation reliability.
Availability of 10 variants spanning 320 to 410 Wp allows the module to be matched to roof-area constraints and project requirements without resorting to a different series. This is particularly valuable for installations where the number of panels is limited by available roof space.
In the same power class (410 Wp), the peer-comparable Luxor Solar Eco Line offers N-type TOPCon technology in a bifacial module with 21.33% efficiency versus a maximum of 21.13% for the GKA157M. More significantly, TOPCon cells exhibit lower first-year light-induced degradation (LID) (~1% vs. ~2% for PERC) and a lower annual degradation rate (~0.4% vs. ~0.6-0.8%), resulting in meaningfully higher cumulative energy yield over 30 years. The global module market passed an inflection point in 2024 - TOPCon's share of new production capacity exceeded 66%, displacing PERC.
The GKA157M is a monofacial module, whereas Luxor Solar offers a bifacial variant in the identical price and power segment (410 Wp), capturing additional rear-surface yield (typically +5-15% with optimal ground albedo). The absence of a bifacial option forecloses higher annual energy yield in ground-mount installations and on lighter roofing surfaces at no additional cost.
Nantong Gamko New Energy (manufacturing capacity ~1.2 GW as of 2023) does not appear on the Bloomberg NEF Tier-1 list, which reflects a manufacturer's creditworthiness and financial stability. For installations with a 25-30-year service life, the manufacturer's continued market presence at the time warranty claims are filed is a tangible risk - particularly given the ongoing consolidation within the module industry.
- 20.9% module efficiency - 1.4pp better than the PERC 0-400W median of 19.4%
- Power density of 209.0 W/m² packs 14.8 W/m² more into the same footprint vs PERC 0-400W median (194.2 W/m²)
- Temperature coefficient of -0.36%/°C matches the PERC 0-400W median
- Ranked #10148 out of 14129 panels for efficiency in the database
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Alternatives
Found 191 panels of the same or similar size to this one, within ±10 mm. See them here Found 227 panels of the same or similar size to this one, within ±25 mm. See them here Found 394 panels of the same or similar size to this one, within ±50 mm. See them here Found 487 panels of the same or similar size to this one, within ±100 mm. See them here
About the GKA157M series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.