Skip to main content
FuturaSun FU 310 M Monocristallino

FuturaSun FU 310 M Monocristallino

310 Wp PERC
ComparePV verdict

Light for its output, weak in heat

Rank 13,373 of 14,354
Compare panels Datasheet PDF
Power (Wp)
310
Weak · bottom 17%
Efficiency (%)
18.98
Typical · median 19.00%
Density (Wp/m²)
189.8
Typical · median 189.9
Temp (%/°C)
-0.389
Weak · bottom 19%
Weight (kg)
17.7
Strong · 1.3 kg below median
Warranty (yrs)
25
Typical · median 25 yrs

FuturaSun's Revamping series was built for one specific job: replacing aging photovoltaic installations without tearing apart the existing mounting structure and wiring. It's a solution aimed at owners of older systems, installed under the first feed-in tariff schemes, whose panels are losing output or starting to fail. The key feature is full dimensional compatibility with old 6-inch modules - the panel fits straight into the existing racking without any mechanical modifications. Module current of roughly 9 amps was matched so it aligns with the electrical parameters of the panels being replaced, letting installers keep the current string configuration and inverter setup intact. The panels use monocrystalline PERC cells in a 60-cell format, housed in a silver frame with white backsheet that visually matches older installations. Another advantage is the positive-only power sorting tolerance, so real-world output never falls below the rated nominal value. The series comes with a 15-year product warranty and a 25-year performance warranty, with design and quality overseen by the manufacturer's Italian headquarters. It's a sound choice for investors who want to refresh their system quickly, affordably, and without risking compatibility issues with their existing setup.

Ranking

308 panels in the segment PERC 300-350 W
Metric This panel Median Position in segment Overall rank
Module efficiency 18.98% 19.00% Typical 13,272
Power density 189.8 189.9 Typical 13,243
Temperature coefficient -0.389 -0.360 Weak · bottom 19% 13,882
Weight per kWp 57.1 60.3 Strong · top 24% 11,297
Performance warranty 25 yrs 25 yrs Typical 10,073
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 5 caution
Best for

Residential.

Not ideal for

Hot climates.

Strengths
57.1 kg per kWp

Top 24% of the PERC 300-350 W segment, against a median of 60.3.

Watch-outs
-0.389 %/°C temperature coefficient

Bottom 19% of the PERC 300-350 W segment, against a median of -0.360.

What owners get
Full mechanical compatibility with existing mounts

The module retains the dimensions of older 6-inch, 60-cell panels, so it fits into existing mounting structures without rebuilding the racking, significantly cutting labor cost and time during revamping projects.

Electrical match to legacy strings

Operating current of around 9 A was matched to older panels, allowing the existing string configuration and inverter setup to be retained without redesigning the installation.

Positive-only power sorting tolerance

Modules are binned with a 0/+ power tolerance only, so actual delivered power never falls below the rated 310-315 Wp, reducing the risk of underperforming yield estimates.

Long 25-year power warranty

The 25-year linear power warranty compares favorably with 2019-era peer products, where 20-25 years was the norm, and exceeds the manufacturer's own 15-year product warranty.

European manufacturer oversight

FuturaSun is headquartered in Italy (founded 2008), offering easier service contact and alignment with EU standards for European buyers compared to some Asian manufacturers sold only through third-party distributors.

Trade-offs
Series discontinued

The Revamping series has been discontinued, meaning limited availability of spare modules and harder-to-process warranty claims going forward, especially when a single panel in a string needs replacing.

Lower efficiency than segment peers

Efficiency of 18.98-19.28% trails comparable 315 Wp modules from other manufacturers, e.g. Motech XS60+ and Jinko Solar 60+ (19.36%), and especially Solar-Fabrik Mono S5 Halfcut (21.69%), yielding less output per m² for the same footprint.

Dated 60-cell PERC technology

The module uses standard single-side PERC cells without half-cut or bifacial technology, which already lagged behind competitors at launch in 2019, such as the half-cut design used in Solar-Fabrik's Mono S5 series.

Narrow use case

The series is purpose-built solely for replacing older 6-inch installations, making it unsuitable for new projects or expanding existing systems based on newer module formats.

Notes from the database
  • Efficiency of 19.0% matches the PERC 0-400W median
  • 189.8 W/m² power density is 4.4 W/m² below PERC 0-400W median (194.2 W/m²) - requires larger installation area
  • Temperature coefficient of -0.39%/°C is 0.03pp worse than PERC 0-400W median (-0.36%/°C) - higher losses in summer heat
  • 17.7 kg weight - 2.8 kg lighter than PERC 0-400W median (20.5 kg), reducing installation effort
  • In the top 92% for efficiency among all PERC panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 310 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 18.98 % Typical Segment median 19.00%
Vmpp · Impp 33.15 V · 9.36 A Operating point at max power
Voc · Isc 40.78 V · 9.72 A Sizes the string length
Max system voltage 1000 V Longer strings than 1000 V modules
Dimensions 1650×990×35 mm · 1.63 m² of roof
Weight 17.7 kg Strong Strong · 1.3 kg below median
Cells 60 · PERC Monocrystalline
Coefficient Pmax -0.389 %/°C Weak bottom 19% of its segment
Coefficient Voc · Isc -0.273 · 0.034 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 25 years Typical median 25 yrs · median 25 yrs
End-of-warranty output 87.0 % Equals 256 W guaranteed
Degradation 3.00 → 0.50 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.389 %/°C against a segment median of -0.360
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
FuturaSun FU 310 M Monocristallino 310 W 18.98% -0.389 17.7 kg You are here
NS-300MH-72 300 W 23.32% -0.290 12.5 kg Cooler, lighter, +4.3 pp
NS-300MH-72 300 W 23.32% -0.290 12.5 kg Cooler, lighter, +4.3 pp
ZEUS 1.2 FullBlack 280W 280 W 23.31% -0.260 14.3 kg Cooler, +4.3 pp, +5 yr warranty
NS-330MH-80 330 W 23.15% -0.290 15.0 kg Cooler, lighter, +4.2 pp
NS-330MH-80 330 W 23.15% -0.290 15.0 kg Cooler, lighter, +4.2 pp
ZEUS 3.2 285WP FullBlack 285 W 23.14% -0.260 15.6 kg Cooler, +4.2 pp, +5 yr warranty
GKA182M285W 285 W 23.00% - 10.8 kg Lighter, +4.0 pp, +5 yr warranty
GKA182M260W 260 W 23.00% - 10.8 kg -50 W, lighter, +4.0 pp
GKA182M270W 270 W 23.00% - 10.8 kg Lighter, +4.0 pp, +5 yr warranty
FU 280 P Policristallino 280 W 17.14% -0.350 17.7 kg -30 W, cooler, -1.8 pp
FU 315 M Monocristallino 315 W 19.28% -0.389 17.7 kg +0.3 pp
SPR-MAX3-400-COM 400 W 22.60% -0.270 19.0 kg Cooler, +3.6 pp, +15 yr warranty
LEPV 400 400 W 22.31% -0.290 20.0 kg +90 W, cooler, +3.3 pp
NS-360MH-60 360 W 22.12% -0.290 17.0 kg +50 W, cooler, +3.1 pp
NS-360MH-60 360 W 22.12% -0.290 17.0 kg +50 W, cooler, +3.1 pp
SPR-MAX3-390-COM 390 W 22.10% -0.270 19.0 kg Cooler, +3.1 pp, +15 yr warranty

Found 194 panels of the same or similar size to this one, within ±10 mm. See them here Found 315 panels of the same or similar size to this one, within ±25 mm. See them here Found 435 panels of the same or similar size to this one, within ±50 mm. See them here Found 503 panels of the same or similar size to this one, within ±100 mm. See them here

About the Revamping series series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Will FuturaSun Revamping series panels fit into the old mounting structure of removed 6-inch modules?
Yes, this is the main purpose of the series. The module dimensions match older 60-cell 6-inch panels, so it fits into the existing mounting structure without any mechanical modifications. There's no need for new mounting rails or different clamp spacing, which significantly cuts replacement time and cost.
Do I need to replace the inverter after switching to FuturaSun Revamping panels?
In most cases, no. The module's current of around 9 amps was selected to match the electrical parameters of the older panels being replaced. This allows the existing string configuration and inverter to stay unchanged, avoiding a full system recalculation.
What warranty comes with the FuturaSun Revamping series?
The panels come with a 15-year product warranty and a 25-year linear power output warranty. The Italian manufacturer FuturaSun also guarantees a positive-only power sorting tolerance, so actual output never falls below the 315 Wp nominal rating.
Is the FuturaSun Revamping series still available for purchase?
No, production of the Revamping series has ended and the model has been discontinued by the manufacturer. Units may still be found at distributors as remaining stock, so it's worth checking current availability with your supplier before planning a replacement project around this module.
What cell technology does the FuturaSun Revamping series use, and how does it differ from bifacial modules?
The panels use monocrystalline PERC cells in a 60-cell format, a classic monofacial design that generates power only from the front side. This proven, cost-effective approach contrasts with bifacial modules, which also capture light reflected onto the rear side. For replacing an aging installation, this simpler monofacial PERC technology is sufficient.
Will FuturaSun Revamping panels visually match an older rooftop installation?
Yes, the modules feature a silver frame and white backsheet, the same color scheme commonly used under early solar subsidy programs. This means the new panels won't stand out visually if only part of the array is being replaced, keeping the roof's appearance consistent.
Add to compare