Strong in heat, modest efficiency
The ET Solar Elite PLUS PERC BIFACIAL series is an advanced solution for investors focusing on maximizing yields from every installed module. Thanks to the use of bifacial technology, these panels absorb energy not only directly from the sun but also from radiation reflected off the ground, allowing for an additional energy gain of up to 25 percent. The foundation of the design is high-efficiency PERC monocrystalline cells, which, combined with half-cut cell architecture, effectively reduce internal losses and minimize the risk of hot spots. The product solves the problem of limited space by offering exceptional power density and a low temperature coefficient, which translates into stable operation even on hot days. It is an ideal choice for photovoltaic farms, ground-mounted installations with high albedo, and modern carports. What sets them apart from the competition is increased resistance to potential-induced degradation (PID) and a reinforced construction resistant to extreme weather conditions, including salt mist and ammonia. By choosing the Elite PLUS series, you gain a 30-year linear power output warranty, making this investment exceptionally safe and predictable over a long time horizon. This is premium-class technology that realistically lowers the LCOE index, ensuring high efficiency in low light conditions and a fast return on investment.
Ranking
Signals from the data
Commercial, utility-scale, shaded-installations and hot-climate.
Tight roof space and roofs where every square metre has to count.
Top 23% of the PERC 500-550 W segment, against a median of -0.350.
Bottom 11% of the PERC 500-550 W segment, against a median of 20.90%.
Bottom 11% of the PERC 500-550 W segment, against a median of 209.0.
The bifacial PERC cell technology captures reflected irradiance from the ground surface (snow, light gravel, concrete). The manufacturer claims a rear-side energy gain of up to 25%, which in ground-mount installations with an albedo ≥0.3 measurably reduces the LCOE compared to monofacial modules of equivalent rated power.
A Pmax temperature coefficient of -0.30%/°C is more favorable than the typical -0.35% to -0.37%/°C range for standard PERC modules. At a cell operating temperature of 65°C, this translates to approximately 1.5–2% higher instantaneous output relative to lower-cost PERC alternatives, resulting in a measurably higher annual energy yield in Central European climates.
The manufacturer guarantees annual power degradation below 0.4%, ensuring retention of >88% of nominal power after 30 years. Comparable peers — Goldi Solar GS10-B144-TF and S-Energy SL65-72BGJ, both at 550 Wp — offer a standard 25-year power warranty. The extended warranty horizon improves cash-flow predictability in project finance models.
The series carries verified resistance to potential-induced degradation (PID), and the module construction meets the requirements of IEC 61701 (salt mist corrosion) and IEC 62716 (ammonia resistance). This makes the series a well-justified choice for agri-PV installations, coastal solar farms, and industrial facilities where standard modules require additional certifications.
The availability of five power bins (530/535/540/545/550 Wp) sharing identical mechanical dimensions simplifies string optimization in irregular-layout installations and reduces the number of SKUs required in distributor inventory.
ET Solar does not appear on the BNEF bankable manufacturers list (confirmed by context data: tier_1_bankable: false; the manufacturer is absent from both the Q2 2025 and Q4 2025 lists). For debt-financed or lease-structured projects and institutional investors, the absence of Tier 1 status means elevated financing risk or an inability to satisfy due diligence requirements. Direct peer IBC Solar benefits from strong bankability through the broader IBC group.
ET Solar filed for bankruptcy and resumed operations after an approximately 20-month hiatus (per DIY Solar Power Forum and SolarReviews). Installers have reported difficulties obtaining warranty claim fulfillment following the company's restart. Given the declared 30-year power warranty, the risk to long-term service continuity is a material risk factor, particularly for commercial and industrial installations.
The product warranty covering frames, cells, bypass diodes, and the junction box is limited to 12 years, while Tier 1 segment leaders — JA Solar, Jinko Solar, and Trina Solar — standardly offer a 25-year product warranty. Any mechanical failure occurring after year 12 places the cost of replacement or repair entirely on the system owner.
- At 20.5% efficiency, this panel is on par with typical PERC 500-550W modules
- Power density of 205.1 W/m² is 3.9 W/m² below PERC 500-550W median (209.0 W/m²) - needs more roof space
- Temperature coefficient of -0.34%/°C matches the PERC 500-550W median
- Bifacial design (70% factor) captures reflected light - adds 4-10% yield on ground-mount or white roof
- In the top 81% for efficiency among all PERC panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2542 panels of the same or similar size to this one, within ±100 mm. See them here