Middle of its segment, weak in heat
The BYD AURO N NLBK-30 panel series is an advanced solution based on N-type TOPCon cell technology, which ensures significantly higher efficiency in challenging lighting conditions and better resistance to light-induced degradation. Thanks to the Full Black design, these modules combine elegance with functionality, making them an ideal choice for demanding residential users who care about modern roof aesthetics without compromising on power output. These panels effectively solve the problem of efficiency loss at high temperatures, offering an excellent temperature coefficient, which translates into stable energy yields even on hot days. The innovative cell structure minimizes the risk of micro-cracks, significantly extending the lifespan of the entire installation and increasing investment security. What sets them apart from the competition is their exceptional mechanical durability and manufacturing precision resulting from the manufacturer's full control over the entire module production process. The AURO N NLBK-30 series is primarily dedicated to the premium residential sector and buildings where high power density per square meter and an impeccable appearance count. By choosing these modules, you gain the certainty of stable operation and maximization of profits from producing your own electricity for many years.
Ranking
Signals from the data
Hot climates.
Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290.
N-type TOPCon cells exhibit zero light-induced degradation (Zero LID) and a temperature coefficient of -0.30%/°C — approximately 0.05 percentage points better than typical PERC modules (-0.35%/°C). In the Polish climate, where summer peaks exceed 35°C, this translates to a real-world annual energy yield gain of 1.5–2% over legacy technologies.
The manufacturer guarantees less than 0.4% annual degradation over 30 years, ensuring retention of >88% of nominal power at the end of the warranty period. Direct comparable peers — Renesola RS4-470~490NX-E1 and Horay Solar — offer equivalent terms, but BYD's Tier-1 status and fully integrated vertical supply chain provide greater assurance that these commitments will be honored.
The bifacial module generates an additional 5–15% energy from the rear surface depending on ground albedo (light gravel ~25%, snow ~80%). In a typical rooftop installation with light-colored finishing elements, the energy yield premium is approximately 6–8%, directly reducing the project's LCOE.
A peak efficiency of 22.65% positions the NLBK-30 series above the Horay Solar HS 182-120 TC Ocean (22.6%) and just below the Renesola RS4-470~490NX-E1 (22.71%). In the 470–490 W power class, the module occupies minimal roof area, which is critical for residential installations with limited available surface.
BYD manufactures its own silicon, cells, and modules within a closed supply chain, eliminating quality risks associated with outsourced cell procurement. Its BNEF-confirmed Tier-1 (bankable) status ensures access to project financing and guarantees consistent warranty support throughout the full coverage period.
A standard 12-year product warranty is the minimum acceptable for the premium segment. Premium Tier-1 competitors — such as the Jinko Tiger Neo and JA Solar Deep Blue 3.0 — offer 15-year workmanship warranties on comparable TOPCon models, giving the investor an additional three years of protection against manufacturing defects at no extra cost.
The black backsheet and black frame absorb approximately 3–5°C more heat than standard modules with a silver frame and white backsheet. At a temperature coefficient of -0.30%/°C, this results in roughly 0.9–1.5% power loss during peak solar hours — a modest but measurable effect over the long-term energy balance.
- At 22.6% efficiency, this panel is on par with typical TOPCon 450-500W modules
- Power density of 226.5 W/m² matches the TOPCon 450-500W median
- At -0.30%/°C, hot weather performance is typical for TOPCon 450-500W panels
- Weight of 25.2 kg is 1.2 kg above TOPCon 450-500W median (24.0 kg) - verify structural support
- Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
Specifications
Datasheet charts
Measured curves published by BYD in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 490 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 746 panels of the same or similar size to this one, within ±10 mm. See them here Found 755 panels of the same or similar size to this one, within ±25 mm. See them here Found 910 panels of the same or similar size to this one, within ±50 mm. See them here Found 1489 panels of the same or similar size to this one, within ±100 mm. See them here