BEM-360W

Among three comparable 360 Wp series, the Extreme Plus achieves the highest module efficiency: it outperforms the Lina Energy LE MEPV 108 (18.44%) by 1.19 percentage points and the Corab Encor (19.27%) by 0.36 percentage points. In practice, this translates to a meaningfully smaller roof area required for the same energy yield.

Bruk-Bet has been manufacturing modules in Poland since 1984 at its facility in Niechobrz, Subcarpathia. The shortened supply chain eliminates foreign-exchange risk on warranty claims, accelerates access to technical support, and removes dependence on sourcing replacement parts from Asia — a significant advantage over a 25-year operating horizon.

The module withstands a static snow load of 8,000 Pa and a wind uplift of 5,400 Pa, well in excess of Polish climatic standard requirements for the vast majority of installation sites. This is particularly important for agricultural and industrial rooftop installations exposed to heavy hail and high wind loads.

Bruk-Bet warrants at least 83% of nominal power output after 25 years, exceeding the IEC minimum threshold of 80%. The module is certified to IEC 61215:2016 and IEC 61730:2017, confirming compliance with current performance and safety standards.

In 2024, PERC's share of global module shipments fell from approximately 63% (2023) to ~40%, with TOPCon emerging as the dominant technology. A direct competitor in the same power class — the Just Solar IBC Mono Module 360 Wp — achieves an efficiency of 21.3%, or 1.67 percentage points higher than the Extreme Plus. By selecting a PERC module in 2025/2026, investors forgo the lower LID degradation and superior high-temperature energy yield that are characteristic of N-type cell technologies.

The current mainstream for mono PERC modules is 400–550 Wp. At 360 Wp, achieving a given system capacity requires a greater number of modules and connectors, increasing both installation costs and the number of potential failure points — an effect that becomes especially pronounced in systems above 10 kWp.

The standard product warranty is 12 years; the 15-year term applies only when the system is installed by a Bruk-Bet Authorized Partner or upon purchase of a paid warranty extension. For installations carried out by contractors outside the authorized partner network, the effective product warranty reverts to 12 years — below the 15-year figure cited in promotional materials.