Skip to main content
AmoSolar Brand review

AS540M10-144B

540 Wp PERC Bifacial 2000%
ComparePV verdict

Strong in heat, heavy for its output

Rank 7,890 of 14,005
Compare panels Datasheet PDF
Power (Wp)
540
Typical for its class
Efficiency (%)
20.90
Typical · median 20.90%
Density (Wp/m²)
208.9
Typical · median 209.0
Temp (%/°C)
-0.340
Strong · top 23%
Weight (kg)
32.1
Weak · 3.7 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The AmoSolar AS530-550M10-144B series consists of modules designed for maximum energy yield in situations where every square meter and stable operation under varying conditions are crucial. The use of bifacial construction allows for effective utilization of reflected light from the ground, which significantly increases energy production in ground-mounted systems, on bright roofs, and on elevated structures. The modules are based on half-cut monocrystalline cells, which enable better performance in partially shaded conditions and reduce internal losses, resulting in more predictable yields in practice.

Another key feature of this series is a two-speed (glass-glass) construction, which enhances resistance to weather conditions and supports long-term stability of parameters. The entire system is designed for 1500 V systems, which facilitates the optimization of strings in larger installations.

This is a good choice for PV farms, large commercial roofs, and investments where durability, consistent quality, and high yield from the same area are essential.

Ranking

706 panels in the segment PERC 500-550 W
Metric This panel Median Position in segment Overall rank
Module efficiency 20.90% 20.90% Typical 10,072
Power density 208.9 209.0 Typical 10,202
Temperature coefficient -0.340 -0.350 Strong · top 23% 8,778
Weight per kWp 59.4 53.0 Weak · bottom 16% 12,148
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 4 caution
Best for

Commercial, utility-scale and shaded-installations.

Not ideal for

Weight-limited structures.

Strengths
-0.340 %/°C temperature coefficient

Top 23% of the PERC 500-550 W segment, against a median of -0.350.

Watch-outs
59.4 kg per kWp

Bottom 16% of the PERC 500-550 W segment, against a median of 53.0.

What owners get
Glass-glass bifacial construction

The dual-pane construction eliminates the penetration of moisture from the back side, which effectively reduces the long-term degradation rate. Bifaciality allows for an additional 10-20% of energy generation in ground-mounted and elevated installations by utilizing reflected radiation.

30-year power guarantee

The manufacturer offers a 30-year linear performance warranty, which exceeds the standard 25 years offered by most competitors in this power segment. For solar farms with a 25+ year financing horizon, this is a measurable contractual advantage.

Efficiency of 20.5–21.28% – comparable to the highest level within the segment

The maximum efficiency of 21.28% is identical to that of the IBC Solar 182M Half Cell (21.28%) and is close to that of Goldi Solar GS10-B144-TF and S-Energy SL65-72BGJ (both 21.3%), placing the series among the leading products in the comparison of 550 Wp PERC bifacial panels.

Half-cut cells and 1500 V certification

The half-cut configuration minimizes losses under partial shading and reduces internal resistance. The design for 1500 V systems allows for longer strings, which lowers cabling and inverter costs in commercial and PV farm installations.

A wide range of power options (530–550 Wp)

Five different power options in a single series simplify string optimization without the need to mix different series, which reduces the risk of mismatch and simplifies the electrical design of large installations.

Trade-offs
Lack of Tier-1 status / bankability

AmoSolar is not listed on the bankability lists of BNEF (Tier-1) or PV ModuleTech, which effectively makes it difficult or impossible for banks requiring bankable manufacturers to finance PV farm projects. Its peer, IBC Solar, has a well-established presence in the European market, which gives it an advantage during investor due diligence.

PERC technology – is losing out to N-type in LID degradation.

The series based on PERC (P-type) technology exhibits a higher light-induced degradation (LID ~2% per year) compared to N-type TOPCon/HJT modules that dominate the 550 Wp segment since 2023. Over a 30-year investment horizon, the difference in annual yield can be 0.3–0.5 percentage points in favor of N-type.

12-year product warranty

The warranty for the product is 12 years, while IBC Solar and some Tier-1 manufacturers in this segment offer warranties of 15-20 years. This can be a significant negotiating point for institutional investors and EPC projects with long-term service contracts.

Notes from the database
  • Efficiency of 20.9% matches the PERC 500-550W median
  • Power density of 208.9 W/m² matches the PERC 500-550W median
  • At -0.34%/°C, hot weather performance is typical for PERC 500-550W panels
  • At 32.1 kg, this panel is 3.7 kg heavier than the PERC 500-550W median (28.4 kg) - more demanding for installation crews
  • #10072 for efficiency, #8778 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 540 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 20.90 % Typical Segment median 20.90%
Vmpp · Impp 41.30 V · 13.08 A Operating point at max power
Voc · Isc 49.20 V · 13.90 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2279×1134×30 mm · 2.58 m² of roof
Weight 32.1 kg Weak Weak · 3.7 kg above median
Cells 144 · PERC Monocrystalline
Bifaciality 2000 % Rear output as a share of front
Coefficient Pmax -0.340 %/°C Strong top 23% of its segment
Coefficient Voc · Isc -0.260 · 0.050 %/°C
NOCT 41 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 85.0 % Equals 459 W guaranteed
Degradation 2.00 → 0.45 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.340 %/°C against a segment median of -0.350
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Alternatives

All AmoSolar panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
AmoSolar AS540M10-144B 540 W 20.90% -0.340 32.1 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg Cooler, lighter, +4.1 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg Cooler, lighter, +3.9 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +3.9 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg Cooler, lighter, +3.8 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +3.7 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg Cooler, lighter, +3.6 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg Cooler, lighter, +3.6 pp
AS530M10-144 530 W 20.51% -0.350 28.6 kg Lighter, -0.4 pp, -5 yr warranty
AS535M10-144 535 W 20.70% -0.350 28.6 kg Lighter, -5 yr warranty
AS545M10-144 545 W 21.09% -0.350 28.6 kg Lighter, -5 yr warranty
AS550M10-144 550 W 21.28% -0.350 28.6 kg Lighter, +0.4 pp, -5 yr warranty
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +110 W, cooler, +4.3 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +105 W, cooler, +4.1 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +100 W, cooler, +3.9 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +95 W, cooler, +3.7 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +90 W, cooler, +3.5 pp

Found 2326 panels of the same or similar size to this one, within ±10 mm. See them here Found 2368 panels of the same or similar size to this one, within ±25 mm. See them here Found 2382 panels of the same or similar size to this one, within ±50 mm. See them here Found 2542 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty is provided for the AmoSolar AS530-550M10-144B panels?
The AS530-550M10-144B series comes with a 12-year product warranty covering material and workmanship defects, along with a 30-year linear power output warranty. This means the manufacturer guarantees that module efficiency will remain above a defined threshold for 30 years. This warranty level is standard for commercial-grade modules and is comparable to what leading brands offer in the market.
What are the benefits of the bifacial design in AmoSolar AS530-550M10-144B panels, and when does it pay off?
The bifacial design allows the module to generate energy from both sides — not only from the front glass but also from the rear glass, utilizing light reflected from the ground surface or a bright rooftop. Real-world bifacial gains typically range from 5–15% compared to a monofacial equivalent, but only when the installation is properly designed: utility-scale PV plants on high-albedo ground, rooftops covered with white TPO/PVC membranes, or elevated mounting structures above light-colored surfaces are the scenarios where bifacial gains are most significant.
Are the AmoSolar AS530-550M10-144B panels suitable for large commercial rooftops or utility-scale PV farms?
Yes, the AS530-550M10-144B series is specifically designed for commercial and utility-scale installations. The modules are rated for 1500 V systems, enabling longer string configurations and reducing BoS wiring costs in large-scale projects. The glass-glass construction provides enhanced mechanical durability, and the power output of up to 550 Wp maximizes energy yield per square meter of racking structure.
How does the half-cut PERC cell technology used in the AS530-550M10-144B series differ from standard cells?
Half-cut PERC cells are laser-cut in half, which reduces internal resistance and lowers resistive heat losses within each cell. As a result, the module handles partial shading more effectively — shading one half of a cell row does not suppress the output of the entire string, as can occur with conventional full-cell layouts. In practice, this translates to higher energy yield during morning and evening hours and under non-uniform irradiance conditions.
Is AmoSolar a Tier 1 manufacturer, and how does this affect purchasing panels from the AS530-550M10-144B series?
AmoSolar does not appear on the Bloomberg NEF Tier 1 module manufacturer list, which means it is a brand with lower market recognition than industry leaders such as LONGi or JA Solar. In practice, this translates to higher risk regarding long-term warranty service and after-sales support availability. Before purchasing, buyers should verify that the distributor or installer provides local warranty claim handling and maintains sufficient inventory to support replacements.
Does the glass-glass construction of the AmoSolar AS530-550M10-144B panels improve module durability?
Yes, the dual-glass construction eliminates the rear backsheet, which tends to yellow and degrade over time due to prolonged UV exposure and moisture ingress. The rear glass is significantly more resistant to delamination, moisture penetration, and mechanical damage than a polymer backsheet. Glass-glass modules exhibit lower long-term degradation rates, which is particularly important in the context of the 30-year linear power warranty offered by the manufacturer.
Add to compare