Skip to main content
AE Solar CMD-144BDS-585

AE Solar CMD-144BDS-585

585 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 3,503 of 14,129
Compare panels Datasheet PDF
Power (Wp)
585
Typical for its class
Efficiency (%)
22.67
Typical · median 22.44%
Density (Wp/m²)
226.7
Typical · median 224.4
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
31.0
Typical · median 31.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The Horizon CMD-144BDS series consists of modules designed specifically for carport canopies and other overhead structures, where the panel doubles as a roofing element. Its n-Type TOPCon half-cut cells deliver stable long-term energy output, while the bifacial double-glass construction captures reflected irradiance from the ground below, boosting the overall yield of the installation. What genuinely sets this series apart from competitors is its DIBt certification, confirming compliance with German building-safety standards, including an extended adhesion test that verifies module safety when mounted overhead. The panels also offer high mechanical resistance to snow, wind, and hail impact loads, and are further protected against salt corrosion, sand, and ammonia exposure, making them suitable for demanding environmental conditions. Thanks to partial transparency, the module lets some light pass through, creating a natural dappled-shade effect under the carport rather than complete darkness. This makes it a strong fit for developers looking for panels that combine energy generation with a structural, building-integrated role, backed by a 30-year performance warranty.

Ranking

1,022 panels in the segment TOPCon 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.67% 22.44% Typical 3,563
Power density 226.7 224.4 Typical 3,537
Temperature coefficient -0.290 -0.290 Typical 2,220
Weight per kWp 53.0 53.8 Typical 6,755
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Commercial, shaded-installations and BIPV.

What owners get
DIBt certification for overhead mounting

The module holds German DIBt certification, including extended laminate adhesion testing, confirming structural safety for overhead installation above pedestrian walkways and parking areas. None of the peer comparables (Talesun, Horay Solar, SunEvo) highlight this certification as a differentiator.

N-Type TOPCon half-cut cells

N-Type TOPCon technology, rather than legacy PERC, delivers lower LID/LeTID degradation and better high-temperature performance (temperature coefficient of -0.29%/°C), translating into higher real annual yield, especially on sun-exposed carport structures during summer.

30-year power warranty above 87%

The manufacturer guarantees over 87% of nominal power retained after 30 years - a longer term than the standard 25-year warranties common in the PERC module segment, at a comparable peak power range (570-590 Wp) to peers Talesun and Horay Solar (590 Wp).

Class 4 mechanical and environmental resistance

The module carries Class 4 hail resistance and Class A fire rating, and is additionally resistant to salt mist corrosion, sand, and ammonia. This is a meaningful advantage for open, weather-exposed carport installations compared to standard rooftop modules without this rating.

Tier-1 manufacturer with 20+ years of history

AE Solar is a German manufacturer operating since 2003, classified as bankable Tier-1, reducing risk related to warranty and service continuity compared to less established brands in this segment.

Trade-offs
Narrow specialization limits versatility

The design's partial light transparency and reinforcement for carport roof loading make this a niche product - it is not an optimal choice for standard rooftop or ground-mount installations, where cheaper monofacial modules deliver comparable yield at lower cost.

Power and efficiency at par with peers, not above

Maximum power of 590 Wp and efficiency of 22.86% are essentially on par with competing bifacial TOPCon series (Talesun TM7G72M - 590 Wp/22.8%; Horay Solar HS 182-144 TC-D - 590 Wp/22.8%; SunEvo SE5-72H - 590 Wp/22.83%), meaning the price premium for DIBt certification and structural function does not translate into an energy yield advantage.

Notes from the database
  • Efficiency of 22.7% matches the TOPCon 550-600W median
  • Power density of 226.7 W/m² matches the TOPCon 550-600W median
  • Temperature coefficient of -0.29%/°C matches the TOPCon 550-600W median
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • In the top 25% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 585 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.67 % Typical Segment median 22.44%
Vmpp · Impp 43.14 V · 13.56 A Operating point at max power
Voc · Isc 52.18 V · 14.47 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2278×1133×30 mm · 2.58 m² of roof
Weight 31.0 kg Typical Typical · median 31.2 kg
Cells 144 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 511 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 585 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
AE Solar CMD-144BDS-585 585 W 22.67% -0.290 31.0 kg You are here
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +2.1 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg -30 W, lighter, +1.9 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg +50 W, lighter, +1.9 pp
AIKO-A630-MAH72Dw 630 W 24.40% -0.260 32.5 kg +45 W, cooler, +1.7 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg -35 W, lighter, +1.7 pp
AE CMD-96BD 375W 375 W 14.53% -0.290 31.0 kg -210 W, -8.1 pp
AE CMD-96BD 380W 380 W 14.72% -0.290 31.0 kg -205 W, -8.0 pp
AE CMD-96BD 385W 385 W 14.92% -0.290 31.0 kg -200 W, -7.8 pp
AE CMD-96BD 390W 390 W 15.11% -0.290 31.0 kg -195 W, -7.6 pp
AE CMD-96BD 395W 395 W 15.30% -0.290 31.0 kg -190 W, -7.4 pp
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +65 W, lighter, +2.5 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg +60 W, lighter, +2.3 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg +55 W, lighter, +2.1 pp

Found 2327 panels of the same or similar size to this one, within ±10 mm. See them here Found 2369 panels of the same or similar size to this one, within ±25 mm. See them here Found 2383 panels of the same or similar size to this one, within ±50 mm. See them here Found 2548 panels of the same or similar size to this one, within ±100 mm. See them here

About the CMD-144BDS series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Are AE Solar Horizon CMD-144BDS panels suitable for carport roofing?
Yes, the CMD-144BDS series is specifically engineered for overhead structures, including carports, where the module serves as the roof itself. The panel holds DIBt certification confirming compliance with German building safety standards, along with extended laminate adhesion testing that ensures safety for installations above people. The glass also has partial transparency, creating a natural shading effect instead of full shade.
What is DIBt certification and why does it matter for the CMD-144BDS panel?
DIBt is a German building certification confirming that a panel meets strict safety standards for structures people can be underneath, such as carports or canopies. For the CMD-144BDS, it means extended laminate adhesion and mechanical durability testing, setting it apart from standard roof-mount panels and making it a safe choice for overhead applications.
What warranty comes with AE Solar CMD-144BDS panels?
The manufacturer provides a 15-year product warranty and a 30-year linear power warranty, which is standard for modern TOPCon-based panels. This long warranty period stems from the stable long-term output of n-Type cells combined with the module's high mechanical resistance to snow, wind, and hail loads.
How do the TOPCon cells in the CMD-144BDS differ from traditional PERC cells?
The n-Type TOPCon half-cut cells used in the CMD-144BDS deliver higher efficiency and slower degradation over time compared to conventional p-type PERC cells. As a result, the panel maintains higher energy output throughout its service life, which supports the extended 30-year linear power warranty.
Does the bifacial double-glass design of the CMD-144BDS actually boost energy yield under a carport?
Yes, the bifacial construction lets the rear side of the panel capture light reflected off the ground, such as a light-colored parking surface, increasing total energy yield compared to monofacial modules. This effect is especially noticeable in elevated carport installations, where the panel sits above the ground and receives good illumination on both sides.
What is the maximum power output of the AE Solar CMD-144BDS and how many panels are needed for a typical carport system?
The CMD-144BDS reaches a maximum power output of up to 590 Wp. For an example 10 kWp system, around 17 modules would be required, though the exact number depends on the geometry of the overhead structure and the specific power variant chosen within the series. It's best to consult an installer familiar with DIBt structural requirements.
Add to compare