Strong in heat, no clear weak spot
The CMD-80BD-I series from the Alpine line is a double-glass bifacial module engineered for extreme climate conditions, including regions exposed to intense hailstorms. The module features n-Type TOPCon half-cut cells, delivering greater resistance to microcracks and more stable performance under partial shading. A key differentiator of this series is its certified resistance to 40 mm hailstones (HW4), paired with a 3.2 mm front glass that provides extra mechanical protection in conditions that would damage standard panels. The transparent, high-transmission rear glass enables the bifacial effect, boosting energy yield without requiring additional roof or ground space. The whole assembly sits in a T6 anodized aluminum alloy frame, ensuring structural stability under wind and snow loads. This makes the series well suited for investors and installers working on projects in mountainous, coastal, or otherwise harsh locations, where weather resilience directly affects system lifespan and LCOE. Backed by a long-term manufacturer warranty and certifications for salt mist, ammonia, and sand/dust resistance, the series performs reliably in both agricultural and industrial installations.
Ranking
Signals from the data
Commercial, shaded-installations and cold-climate.
Top 20% of the TOPCon 300-350 W segment, against a median of -0.300.
The CMD-80BD-I series, part of the Alpine line, is tested against hailstones up to 40 mm in diameter (HW4 rating), and combined with a 3.2 mm front glass this sets it apart from standard bifacial modules, which typically use 2.0-2.5 mm glass.
TOPCon half-cut cell technology delivers lower LID/LeTID degradation than older PERC cells and better tolerance to partial shading and microcracks, supporting a more stable energy yield in harsh field conditions.
A high-transmittance rear glass enables additional energy capture from reflected irradiance without increasing footprint - a meaningful advantage on bright ground, snow, or sand surfaces.
The 30-year power warranty (15-year product warranty) matches the highest tier currently available on the market, putting this series on par with premium tier-1 modules and improving LCOE predictability over the project lifetime.
AE Solar is listed as a bankable Tier-1 manufacturer headquartered in Germany, operating since 2003, which facilitates project financing for banks and institutional investors requiring an established supplier.
The CMD-80BD-I series has been discontinued (status: discontinued), meaning limited availability of modules for system extensions and potential challenges with servicing and warranty claims going forward.
Efficiency of 14.62-15.55% is noticeably below comparable Tier-1/Tier-2 modules - Selfa SV120M.5(3) reaches 19.8% and SunLink LUXMAX 20.16% at the same 335 Wp max power, meaning a larger mounting area is needed for the equivalent system capacity.
- At 15.6% efficiency, this panel is on par with typical TOPCon 0-400W modules
- Power density of 155.4 W/m² matches the TOPCon 0-400W median
- At -0.29%/°C, hot weather performance is typical for TOPCon 0-400W panels
- At 31.5 kg (7.6 kg above TOPCon 0-400W median of 23.9 kg), requires checking roof load capacity
- Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
Specifications
Datasheet charts
Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 335 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Found 726 panels of the same or similar size to this one, within ±10 mm. See them here Found 784 panels of the same or similar size to this one, within ±25 mm. See them here Found 872 panels of the same or similar size to this one, within ±50 mm. See them here Found 1536 panels of the same or similar size to this one, within ±100 mm. See them here
About the CMD-80BD-I series
These answers cover the whole series. Where a figure differs, the specification above is this module's own.