Skip to main content
AE Solar AE CMD-80BD-I-320

AE Solar AE CMD-80BD-I-320

320 Wp TOPCon Bifacial 80%
ComparePV verdict

Strong in heat, no clear weak spot

Rank 13,866 of 14,354
Compare panels Datasheet PDF
Power (Wp)
320
Typical for its class
Efficiency (%)
14.85
Typical · median 15.04%
Density (Wp/m²)
148.5
Typical · median 150.1
Temp (%/°C)
-0.290
Strong · top 20%
Weight (kg)
31.5
Typical · median 27.2 kg
Warranty (yrs)
30
Typical · median 30 yrs

The CMD-80BD-I series from the Alpine line is a double-glass bifacial module engineered for extreme climate conditions, including regions exposed to intense hailstorms. The module features n-Type TOPCon half-cut cells, delivering greater resistance to microcracks and more stable performance under partial shading. A key differentiator of this series is its certified resistance to 40 mm hailstones (HW4), paired with a 3.2 mm front glass that provides extra mechanical protection in conditions that would damage standard panels. The transparent, high-transmission rear glass enables the bifacial effect, boosting energy yield without requiring additional roof or ground space. The whole assembly sits in a T6 anodized aluminum alloy frame, ensuring structural stability under wind and snow loads. This makes the series well suited for investors and installers working on projects in mountainous, coastal, or otherwise harsh locations, where weather resilience directly affects system lifespan and LCOE. Backed by a long-term manufacturer warranty and certifications for salt mist, ammonia, and sand/dust resistance, the series performs reliably in both agricultural and industrial installations.

Ranking

44 panels in the segment TOPCon 300-350 W
Metric This panel Median Position in segment Overall rank
Module efficiency 14.85% 15.04% Typical 14,183
Power density 148.5 150.1 Typical 14,165
Temperature coefficient -0.290 -0.300 Strong · top 20% 2,288
Weight per kWp 98.4 87.2 Typical 14,250
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

6 positive · 2 caution
Best for

Commercial, shaded-installations and cold-climate.

Strengths
-0.290 %/°C temperature coefficient

Top 20% of the TOPCon 300-350 W segment, against a median of -0.300.

What owners get
HW4-certified hail resistance (40 mm)

The CMD-80BD-I series, part of the Alpine line, is tested against hailstones up to 40 mm in diameter (HW4 rating), and combined with a 3.2 mm front glass this sets it apart from standard bifacial modules, which typically use 2.0-2.5 mm glass.

N-type TOPCon half-cut cells

TOPCon half-cut cell technology delivers lower LID/LeTID degradation than older PERC cells and better tolerance to partial shading and microcracks, supporting a more stable energy yield in harsh field conditions.

Bifacial design with transparent rear glass

A high-transmittance rear glass enables additional energy capture from reflected irradiance without increasing footprint - a meaningful advantage on bright ground, snow, or sand surfaces.

30-year linear power warranty

The 30-year power warranty (15-year product warranty) matches the highest tier currently available on the market, putting this series on par with premium tier-1 modules and improving LCOE predictability over the project lifetime.

Bankable Tier-1 German manufacturer (since 2003)

AE Solar is listed as a bankable Tier-1 manufacturer headquartered in Germany, operating since 2003, which facilitates project financing for banks and institutional investors requiring an established supplier.

Trade-offs
Series discontinued

The CMD-80BD-I series has been discontinued (status: discontinued), meaning limited availability of modules for system extensions and potential challenges with servicing and warranty claims going forward.

Lower efficiency versus peers

Efficiency of 14.62-15.55% is noticeably below comparable Tier-1/Tier-2 modules - Selfa SV120M.5(3) reaches 19.8% and SunLink LUXMAX 20.16% at the same 335 Wp max power, meaning a larger mounting area is needed for the equivalent system capacity.

Notes from the database
  • Efficiency of 14.8% is 0.6pp below the TOPCon 0-400W median (15.4%)
  • Power density of 148.5 W/m² is 5.4 W/m² below TOPCon 0-400W median (153.9 W/m²) - needs more roof space
  • At -0.29%/°C, hot weather performance is typical for TOPCon 0-400W panels
  • At 31.5 kg (7.6 kg above TOPCon 0-400W median of 23.9 kg), requires checking roof load capacity
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof

Specifications

Open datasheet PDF
Nominal power (Pmax) 320 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 14.85 % Typical Segment median 15.04%
Vmpp · Impp 23.58 V · 13.57 A Operating point at max power
Voc · Isc 27.95 V · 14.31 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1902×1133×30 mm · 2.15 m² of roof
Weight 31.5 kg Typical Typical · median 27.2 kg
Cells 80 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.290 %/°C Strong top 20% of its segment
Coefficient Voc · Isc -0.250 · 0.046 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 280 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by AE Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 320 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.300
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
AE Solar AE CMD-80BD-I-320 320 W 14.85% -0.290 31.5 kg You are here
NS-300MH-72 300 W 23.32% -0.290 12.5 kg 19 kg lighter, +8.5 pp, -5 yr warranty
NS-300MH-72 300 W 23.32% -0.290 12.5 kg 19 kg lighter, +8.5 pp, -5 yr warranty
ZEUS 1.2 FullBlack 280W 280 W 23.31% -0.260 14.3 kg -40 W, 17 kg lighter, +8.5 pp
NS-330MH-80 330 W 23.15% -0.290 15.0 kg 16 kg lighter, +8.3 pp, -5 yr warranty
NS-330MH-80 330 W 23.15% -0.290 15.0 kg 16 kg lighter, +8.3 pp, -5 yr warranty
ZEUS 3.2 285WP FullBlack 285 W 23.14% -0.260 15.6 kg -35 W, 16 kg lighter, +8.3 pp
GKA182M285W 285 W 23.00% - 10.8 kg -35 W, 21 kg lighter, +8.2 pp
GKA182M270W 270 W 23.00% - 10.8 kg -50 W, 21 kg lighter, +8.2 pp
GKA182M300W 300 W 23.00% - 16.2 kg -20 W, 15 kg lighter, +8.2 pp
AE CMD-80BD-315 315 W 14.62% -0.290 25.5 kg Lighter, -0.2 pp
AE CMD-80BD-325 325 W 15.08% -0.290 25.5 kg Lighter, +0.2 pp
AE CMD-80BD-330 330 W 15.31% -0.290 25.5 kg +10 W, lighter, +0.5 pp
AE CMD-80BD-335 335 W 15.55% -0.290 25.5 kg +15 W, lighter, +0.7 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg +240 W, lighter, +10.0 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg +235 W, lighter, +9.8 pp
LR7-60HVHL-550M 550 W 24.40% -0.260 16.3 kg +230 W, 15 kg lighter, +9.5 pp

Found 726 panels of the same or similar size to this one, within ±10 mm. See them here Found 784 panels of the same or similar size to this one, within ±25 mm. See them here Found 872 panels of the same or similar size to this one, within ±50 mm. See them here Found 1536 panels of the same or similar size to this one, within ±100 mm. See them here

About the CMD-80BD-I series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Is the AE Solar CMD-80BD-I series still available for purchase?
The CMD-80BD-I series has been discontinued from AE Solar's current production lineup and replaced by newer models in the Alpine range. Availability is now limited to remaining distributor stock. Anyone planning to expand an existing installation with identical modules should contact a supplier promptly, as matching visual appearance and electrical specs with newer modules may be difficult once stock runs out.
How does the hail resistance of the CMD-80BD-I differ from standard PV modules?
Standard PV panels are typically tested against hail up to 25 mm in diameter, while the CMD-80BD-I carries an HW4 certification, rated for hail up to 40 mm. It also uses a 3.2 mm front glass, thicker than the typical 2 mm found on standard panels. This gives a real advantage for installations in mountainous regions or areas prone to severe hailstorms.
What warranty does AE Solar offer on the CMD-80BD-I panels?
The manufacturer provides a 15-year product warranty along with a 30-year power output warranty. This means the module is expected to retain a high percentage of its rated output for significantly longer than panels with a typical 25-year linear power warranty. AE Solar is a Tier 1 manufacturer headquartered in Germany, which further supports the credibility of these terms.
What does bifacial design offer on the CMD-80BD-I, and is it worth the extra cost?
The transparent rear glass lets the module capture light reflected off the ground or roof surface, which over a bright surface (such as white gravel, snow, or metal roofing) can increase energy yield by several percentage points compared to a monofacial panel of the same 335 Wp rating. The premium makes the most sense for ground-mounted systems or flat roofs with suitable tilt and ground clearance.
Do the n-Type TOPCon cells in the CMD-80BD-I handle partial shading better than standard PERC cells?
Yes, the half-cut design splits the TOPCon cells into smaller segments, so under partial shading (from chimneys, trees, or neighboring panels) the overall module experiences smaller power losses than panels using full-size PERC cells. n-Type TOPCon cells also have a lower degradation rate over time and better resistance to microcracks caused during transport and installation.
What kinds of installations is the 335 Wp CMD-80BD-I series best suited for?
With a maximum power of 335 Wp and a design resistant to hail, salt corrosion, ammonia, and sand, this panel is built for demanding projects: mountain and coastal installations, agricultural sites (such as near livestock buildings), and industrial applications. The anodized T6 aluminum alloy frame adds extra strength against wind and snow loads, making it a solid choice where standard panels would degrade faster.
Add to compare