Skip to main content

Jinko Solar vs Tescom Solar - solar panel manufacturer comparison

Jinko Solar
China Founded 2006 Tier 1
Read the Jinko Solar review
VS
Tescom Solar
Turkey Founded 1980
Read the Tescom Solar review
At a glance

Jinko Solar has the broader catalog (637 vs 1 models). Jinko Solar leads on peak efficiency at 24.80%. Jinko Solar leans bifacial (36% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
637 1
Highest power
735 Wp 275 Wp
Best efficiency
24.8% 16.8%
Average efficiency
22.2% 16.8%
Bifacial share
36% 0%
Average warranty
29 yrs -
01

The two companies

Company facts, not datasheet figures
Jinko Solar

JinkoSolar is a global leader in the solar industry, manufacturing and distributing solar products and solutions to a diversified international customer base. They have a vertically integrated solar product value chain. The company is committed to providing clean, efficient, and sustainable energy solutions worldwide.

Founded
2006
Headquarters
Shanghai, China
Annual capacity
130.0 GW/year
Employees
33,830
Listed
NYSE: JKS
Tier 1 bankable
Yes
Tescom Solar

TESCOM A.Ş. was established in Izmir to operate in the field of power electronics based on the uninterrupted energy needs of Turkish industry. The company started its operations in 1980 to produce inverters and electronic control devices. Tescom Solar helps maximize the efficiency of solar power plants and reduce...

Founded
1980
Headquarters
Izmir, Turkey
Employees
51-200
02

Catalogue against catalogue

Averages over every model in the database
Metric Jinko Solar Tescom Solar
Catalog & Power
Panel Models 637+636 1
Max Power 735 W+460 W 275 W
Avg Power 523 W+248 W 275 W
Efficiency
Max Efficiency 24.80%+8.03 pp 16.77%
Avg Efficiency 22.18%+5.41 pp 16.77%
Reliability & Warranty
Avg Temp Coefficient -0.304%/°C+0.136 -0.440%/°C
Bifacial Share 231 (36%)+36 pp 0 (0%)
Avg Warranty 28.7 yrs -

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Jinko Solar skews to higher efficiency: 29% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Jinko Solar offers more 600W+ panels (26% of lineup)

Jinko Solar cell technology
Share of their models by cell architecture

Dominant cell tech: <strong>TOPCon</strong> (41%)

Tescom Solar cell technology
Share of their models by cell architecture
04

The flagships

Highest-power models from each brand
05

Written summary

Checking cache...

Jinko Solar and Tescom Solar occupy fundamentally different positions in the global photovoltaic industry. Jinko Solar, founded in 2006 in China and listed on the NYSE, is the world's largest solar module manufacturer, with a production capacity of 130 GW, more than 33,000 employees, and consistent Tier 1 bankable status. The company has ranked first globally for the seventh time and has cumulatively shipped over 390 GW of modules. Tescom Solar, by contrast, is a Turkish company established in Izmir in 1980, with its origins in power electronics and UPS manufacturing. Its photovoltaic division is considerably smaller - the company employs between 51 and 200 people, carries a single panel model in the available database at 275 Wp, and does not hold a Tier 1 designation.

Jinko's technology portfolio is centered on N-type TOPCon cells, led by the Tiger Neo series, with a maximum panel efficiency of 24.8% and a portfolio average of 22.0% across 545 models. An average temperature coefficient of -0.31%/°C outperforms many industry peers, making Jinko modules well suited for warm-climate deployments, utility-scale ground-mount farms, and commercial C&I rooftop installations. Approximately 32% of the portfolio consists of bifacial panels, which deliver additional yield gains in ground-mount configurations through reflected irradiance. Tescom Solar's single catalogued model offers 275 Wp at 16.77% efficiency with a temperature coefficient of -0.44%/°C - figures that reflect an older generation of crystalline technology. The company's extensive background in UPS and power conversion equipment could make it a relevant choice for system integrators seeking a single EMEA-region supplier covering panels, inverters, and backup power, but its photovoltaic offering is too narrow for large-scale or performance-critical solar projects.

For international buyers comparing the two manufacturers, Jinko Solar is the clear choice across virtually all installation scales - residential rooftop, commercial C&I, and utility ground-mount - given its technology leadership, supply reliability, bankability, and long warranty terms averaging around 28.5 years across the portfolio. Tescom Solar's value proposition is confined to niche scenarios where a Turkish-origin product or an integrated energy-electronics supply package from a single regional vendor carries specific procurement or regulatory importance.

Generated by Claude Sonnet · 2026-05-12

06

Other brand comparisons

Build your own
Manufacturers
Jinko Solar A.B. Energy
Manufacturers
AE Solar Tescom Solar
Manufacturers
Jinko Solar AEET
Manufacturers
AIKO Tescom Solar
Manufacturers
Jinko Solar AKCOME
Manufacturers
ARTsolar Tescom Solar
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 173 Jinko Solar offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.