The IBC Solar ISolar SMG II range is designed for off-grid and hybrid systems - ideal for applications where energy independence is crucial, enabling power supply for consumers even with limited grid access. A defining feature of this range is integrated operation with an energy storage system, allowing the installation to effectively utilize autarky and stabilize power supply for homes or small businesses.
The devices feature 1 MPPT, simplifying precise maximum power point tracking for a single string of modules - an effective solution for simpler roofs with few planes and no complex orientations. High European efficiency means significantly fewer losses under typical operating conditions in Poland, resulting in better annual energy yield.
Practically, communication and monitoring capabilities are also important - models in this series are commonly equipped with a WiFi module and service interfaces for diagnostics. For consumer and small commercial applications, safety features and compliance with installation requirements, along with clearly defined warranty conditions, will also be key.
Ranking
Specifications
Pros and cons
SMG II series models support parallel operation of up to 12 units (e.g., the 6.2KP), enabling a combined three-phase system capacity of up to ~74 kW. This sets the series apart from the majority of prosumer-grade off-grid inverters, which do not offer native parallel stacking.
The series supports the RS485 protocol with widely used BMS brands - Pylontech, JK (Jikong), and Daly - without requiring protocol gateways. This is a significant advantage in hybrid systems built around LiFePO4 battery packs, where accurate data exchange between the inverter and BMS directly affects cell longevity.
Select SMG II models (e.g., the -WIFI variants) ship with an integrated Wi-Fi module ready to use out of the box, eliminating the need to purchase external data loggers as required by, for example, SMA Sunny Island or older Victron product lines. This simplifies initial commissioning of system monitoring.
The series spans models from 2 kW (12 V, small/mobile installations) to 11 kW (48 V), allowing a system designer to select the appropriate unit from the same product family - whether for a small vacation cabin or a full prosumer residential installation - without switching service platforms.
The inverter includes built-in charge profiles tailored to both LiFePO4 and Li-ion chemistries, with overcharge protection, meeting the baseline requirement for integration with modern energy storage systems. The manufacturer confirms this functionality in the official User Manual (ManualsLib, rev. SMG II Series).
Multiple threads on DIY Solar Power Forum document non-functional or intermittent RS485 communication with Daly and JK BMS units (e.g., PB2A16S15P), despite the manufacturer's official compatibility claims. Resolving the issue typically requires manual protocol configuration or a firmware update, raising the barrier to entry for non-technical users.
Users on DIY Solar Power Forum (thread: 'EASun SMG II Minimum PV voltage') report yields of approximately ~124 W from a string that delivered ~300 W on a comparable grid-tie inverter under overcast conditions - roughly 41% of expected output. This points to limitations in the MPPT controller at low DC input voltages, where the required start voltage ranges from approximately 120-250 V DC.
Unlike inverters equipped with temperature-controlled variable-speed fans (e.g., Victron MultiPlus-II, Fronius Symo), the SMG II's cooling fan operates at all times. This produces constant background noise and accelerates bearing wear - a notable drawback when the unit is installed in living spaces or utility rooms adjacent to bedrooms.
The ISolar SMG II is a product line of Easun Power Technology Co., Ltd. (Shenzhen, est. 2012), marketed by IBC Solar as a house-brand offering. Easun Power is classified as an OEM reseller sharing components with multiple Chinese manufacturers. For end customers, this is a relevant factor when evaluating post-sale support and spare parts availability through the German distributor IBC Solar.
Alternatives
About the ISolar SMG II series
These answers cover the whole series. Where a figure differs, the specification above is this model's own.