Skip to main content
Easun Power 5.6KW

Easun Power 5.6KW

5.6 kW Hybrid Single-phase Battery-ready
Compare with closest alternative Datasheet PDF
Rated AC (kW)
5.60
Typical for its class
Euro eff. (%)
-
Not published
MPPT
1
Weak · bottom 7%
Max DC (V)
500
Weak · bottom 19%
Weight (kg)
12.0
Strong · 3.5 kg below median
Warranty (yrs)
-
Not published

Easun Power Hybrid Inverter / Charger Series are hybrid working devices - combining off-grid mode with the ability to work with the grid (grid-tie). This makes them suitable for both self-consumption and as backup power. A key feature is intelligent source switching (PV-battery-grid or generator) and comprehensive priority power modes, which facilitate adapting the installation's operation to tariffs and consumption profiles. Depending on the version, the series offers single or dual MPPT - two independent MPPT channels genuinely help with shading and modules on different roof pitches, maintaining better production throughout the day. High efficiency under European conditions means fewer losses at typical temperatures and loads, resulting in more usable energy from the same installation. Plus, built-in WiFi and monitoring via an app, communication options (e.g., RS485), and support for BMS for popular energy storage systems. Various versions with safety features and compliance declarations (including CE, and in selected models also VDE) are available, while the warranty depends on the sales channel. This is the choice for home and small commercial installations, where flexibility and the possibility of expansion matter.

Ranking

362 inverters from 3 to 6 kW
Metric This inverter Median Position in class Rank in class
European efficiency - 97.2% Not published -
MPPT trackers 1 2 Weak · bottom 7% 222
Max DC input voltage 500 V 600 V Weak · bottom 19% 237
Weight per kW 2.1 3.3 Strong · top 14% 49
Warranty - 5 yrs Not published -
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Specifications

Open datasheet PDF
Rated AC power 5.6 kW Continuous output
Max apparent power 5.60 kVA
Phases Single-phase
Nominal AC voltage 230 V Acceptable AC input voltage range: 90-280 VAC or 170-280 VAC (also stated as grid input acceptable range)
Max AC current 24.3 A
Grid frequency 50 Hz Range Auto sensing 50/60 Hz (feed-in grid frequency range depends on regulation selection)
Power factor >0.99
Max DC input power 6.00 kW DC/AC ratio 1.07
Max DC voltage 500 V Caps the string length
MPPT voltage range 120 to 430 V
MPPT trackers 1
Max short-circuit current per MPPT 27.0 A Must exceed the panel's Isc
Max efficiency 96.0 % Best single operating point
Battery port Yes
Battery voltage Nominal 48 VDC (range not specified)
Max charge current 120.0 A
Grid-forming Yes
Dimensions 468 × 295 × 140 mm Height × width × depth
Weight 12.0 kg 2.1 kg per kW
Cooling forced-air
Operating temperature -10 to 50 °C
Max humidity 90 %
Interfaces Wi-FiDisplay
Protocols RS232WiFiDry-ContactCAN (BMS)RS-485 (BMS)

Pros and cons

5 positive · 3 caution
What owners get
Dual MPPT for diverse roof orientations

Selected models from the series are equipped with two independent MPPT tracks (e.g., 12 kW / 150A MPPT), which allows for the use of modules at different angles or in partially shaded conditions without mutual interference. In practice, this translates to a significantly higher daily yield compared to a single MPPT system with the same number of panels.

Native support for popular battery management systems (BMS)

The series supports communication with commonly used energy storage systems: Pylontech, JK, Jikong, and Daly - without the need for additional converters. Built-in Wi-Fi and a dedicated mobile application enable remote monitoring and parameter changes, which installers appreciate when performing maintenance without being on-site.

Parallel processing for up to 9 units

Model 5.6 kW (and other models from the SMH/SMG series) supports the parallel connection of up to 9 inverters, enabling the system's power rating to be scaled up to approximately 50 kW without the need for an additional AC combiner box. This is a significant advantage for small commercial installations, where demand grows in stages.

Battery-free mode (photovoltaic + grid without battery)

Inverters in this series can power loads directly from PV panels and/or the grid without an installed battery - a useful feature when building the system in stages, as the energy storage is added later in the project.

Wide range of power options and a low entry price

The series includes models ranging from 2.2 kVA (24 V) to 12 kW (48 V), allowing users to select an inverter for both small (off-grid cabins) and medium-sized (single-family homes) installations. Prices on the European market (AliExpress, Geekbuying) are significantly lower than those of leading European brands (SolarEdge, Fronius), making the series an attractive option for DIY installations with limited budgets.

Trade-offs
Serious warranty issues in the EU

Reviews on Trustpilot (2024-2025) document instances where Easun Power refused to honor warranties in Europe: customers waited over 2 months for parts, the company deleted correspondence history or ceased communication. The lack of an authorized service network in Poland and the EU means that warranty repairs effectively fall on the importer or the customer.

The loud, constant hum of the fan

Users on the DIY Solar Power Forum repeatedly report (threads from 2023-2025) that the fans operate continuously - even at night with no load and no sunlight. The noise level was compared to "a slightly annoying vacuum cleaner"; the SMH-II model was impossible to tolerate with an open window at a distance of approximately 1.2 meters. This defect disqualifies installation in residential spaces or garages adjacent to bedrooms.

VDE certification is only available for specific models.

Most units in this series only have CE/RoHS/SAA certification. VDE certification (required by some power plants in Germany and Austria, and increasingly used as a benchmark by Polish distributors) is only available in specific variants, which may limit the use of this series in applications that require certified equipment.

Inverter Power Euro eff. MPPT Weight Difference
Easun Power 5.6KW 5.6 kW - 1 12.0 kg You are here
Hybrid 5.6KW Inverter/Charger 5.6 kW - 1 12.0 kg Similar on paper
ISolar SMG II 5.6KW 5.6 kW - - 10.0 kg 2.0 kg lighter
ISolar SMG II 5.6KP 5.6 kW - - 10.0 kg 2.0 kg lighter
SPM 5500TL-HU 5.5 kW 97.6% 2 26.0 kg +1 MPPT, 14.0 kg heavier
5.5KVA (PVmax=500V, 48V battery) 5.5 kW - - 8.7 kg 3.3 kg lighter
IGrid VE II 5.5K 48V 5.5 kW - - 11.9 kg Similar on paper
SE10K (Three Phase, Delta Grids) 5.8 kW 97.6% - 16.4 kg +0.2 kW, 4.4 kg heavier
SE6000H 6 kW 99.0% - 12.0 kg +0.4 kW

About the Hybrid Inverter / Charger series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this model's own.

Can the Easun Power Hybrid Inverter / Charger operate both off-grid and in conjunction with the grid simultaneously?
Yes, this is a key feature of this series. The device combines off-grid operation with grid-tie functionality, allowing users to prioritize energy from PV panels and cover any surpluses or deficits with the grid or batteries. The user configures the power source priorities (e.g., Solar First, SBU, Utility First) using an LCD menu, tailoring the operation to their specific energy tariff and consumption profile.
Which types of energy storage systems are compatible with the Easun Power Hybrid Inverter/Charger, and does it support a Battery Management System (BMS)?
The series supports popular LiFePO4 (48 V) batteries and works with BMS systems via RS485 or CAN interfaces. This enables two-way communication with the battery, automatic overcharge and deep discharge protection, as well as precise charging management. It is advisable to confirm with the supplier that the BMS protocol is compatible with the specific battery model before purchasing.
What advantages does the dual MPPT feature in the Easun Power inverter offer, and when is it a worthwhile choice?
Dual MPPT refers to two independent maximum power point tracking (MPPT) systems. This is particularly useful when panels are mounted at different azimuth angles or tilt angles, or when part of the installation is shaded. Each MPPT system optimizes its string independently, rather than averaging conditions, which translates into a higher energy output throughout the day.
How does the mobile app and WiFi monitoring function in the Easun Power Hybrid Inverter / Charger?
The series includes a built-in Wi-Fi module that connects the inverter to the manufacturer's cloud. A dedicated app (available for Android and iOS) displays real-time data on PV power, battery charge status, energy flow to and from the grid, and production history. This allows users to remotely adjust priority settings, track alerts, and diagnose potential issues without physical access to the device.
What certifications does the Easun Power Hybrid Inverter / Charger series have, and is it possible to connect it to the grid in Poland?
The series has CE certification, and some models also have VDE certification, which is required in German-speaking markets and is increasingly expected by Polish distributors. Before connecting to the Polish power grid, the installation must be reported to the local distribution network operator (OSD), and it must be ensured that the specific model meets the connection requirements. It is advisable to verify this with the installer or directly with the seller.
What is the warranty on the Easun Power Hybrid Inverter/Charger, and where can I find technical support?
The standard manufacturer's warranty is 12 months, but terms may vary depending on the sales channel - some distributors offer extended protection or local service support. If you encounter any technical issues, it's advisable to consult the documentation on the manufacturer's website, the manuals available on Manuals+, or online forums (such as the DIY Solar Power Forum), where users share their experiences with configuring these devices.
Compare with alternative