Skip to main content
Force H1 (4 modules) vs EP11 4 of 13 identical Swap Change batteries

Pylontech Force H1 (4 modules) vs FoxESS EP11

Force H1 (4 modules)
8.96 kWh HV
Open battery page Datasheet PDF
VS
FoxESS EP11
EP11
9.33 kWh 95.0 % round-trip LFP HV
Open battery page Datasheet PDF
The verdict

EP11 leads on the differences that matter

The largest is usable energy: 0.37 kWh apart. 4 of 13 comparable parameters are identical, with 20 more left out because at least one datasheet does not publish them.

See all 9 differences
How alike are they
4 of 13 comparable
parameters are identical
identical differs not published
01

What actually differs

9 of 13 parameters
Parameter Force H1 (4 modules) EP11 Difference
Usable energy 8.96 kWh 9.33 kWh 0.37 kWh apart
Nominal energy 9.95 kWh 10.36 kWh 0.41 kWh apart
Nominal voltage 192 V 384 V 192 V apart
Weight 259.0 kg 99.0 kg 160.0 kg lighter
Weight per kWh 28.9 kg/kWh 10.6 kg/kWh 18.3 kg/kWh lighter
Min operating temperature 0 °C -10 °C 10 °C more cold tolerant
Max operating temperature 50 °C 55 °C 5 °C more heat tolerant
Ingress protection IP55 IP65 IP55 vs IP65
Dimensions 1380x600x380 mm 625x710x147 mm 1380x600x380 mm vs 625x710x147 mm

Shop prices by brand: See 103 Pylontech offers · See 31 FoxESS offers

02

Full specification

Parameter Force H1 (4 modules) EP11 Difference
Capacity
Usable energy 8.96 kWh 9.33 kWh 0.37 kWh apart
Nominal energy 9.95 kWh 10.36 kWh 0.41 kWh apart
Depth of discharge 90 % 90 % Same
Max system capacity - 37.3 kWh Not published by Pylontech
Modules per stack 2-7 - Not published by FoxESS
Power
Continuous discharge power - - Neither datasheet publishes this
Continuous charge power - - Neither datasheet publishes this
Peak discharge power - - Neither datasheet publishes this
Power per kWh - - Neither datasheet publishes this
Efficiency and lifetime
Round-trip efficiency - 95.0 % Not published by Pylontech
Cycle life - 4000 cycles Not published by Pylontech
Cycle test depth - 90 % Not published by Pylontech
Capacity at end of life - - Neither datasheet publishes this
Self-discharge - - Neither datasheet publishes this
Electrical
Voltage class High voltage High voltage Same
Nominal voltage 192 V 384 V 192 V apart
Operating voltage - 348-438 V Not published by Pylontech
Cell chemistry - LFP Not published by Pylontech
Active cell balancing - - Neither datasheet publishes this
Thermal management - - Neither datasheet publishes this
Built-in inverter
Inverter None (battery only) None (battery only) Same
Inverter power - - Neither datasheet publishes this
Grid connection - - Neither datasheet publishes this
Backup power - - Neither datasheet publishes this
Physical
Weight 259.0 kg 99.0 kg -160.0 kg for EP11
Weight per kWh 28.9 kg/kWh 10.6 kg/kWh -18.3 kg/kWh for EP11
Dimensions 1380x600x380 mm 625x710x147 mm 1380x600x380 mm vs 625x710x147 mm
Ingress protection IP55 IP65 IP55 vs IP65
Outdoor-rated Yes Yes Same
Min operating temperature 0 °C -10 °C -10 °C for EP11
Max operating temperature 50 °C 55 °C +5 °C for EP11
Warranty
Warranty - 10 yrs Not published by Pylontech
Warranted throughput - - Neither datasheet publishes this
03

More useful comparisons

Open all batteries
Similar capacity
Pylontech Force H1 (4 modules) vs Solplanet Ai-HB 100A
9 differences, the largest is usable energy
Similar capacity
Pylontech Force H1 (4 modules) vs FoxESS HS10
7 differences, the largest is usable energy
Similar capacity
Pylontech Force H1 (4 modules) vs Pylontech Force H2 (3 modules)
6 differences, the largest is usable energy
04

Written summary

Every figure here is from the manufacturers' own datasheets - a dash means the value is not published, never an estimate.