Skip to main content

APsystems vs Recom - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
Recom
Italy Founded 2007
Read the Recom review
At a glance

Recom has the broader catalog (61 vs 0 models). Recom leans bifacial (38% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 61
Highest power
0 Wp 730 Wp
Best efficiency
- 24.3%
Average efficiency
- 22.7%
Bifacial share
0% 38%
Average warranty
- 30 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
Recom
Founded
2007
Headquarters
Bolzano, Italy
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems Recom
Catalog & Power
Panel Models 0 61+61
Max Power 0 W 730 W+730 W
Avg Power 0 W 548 W+548 W
Efficiency
Max Efficiency - 24.30%
Avg Efficiency - 22.68%
Reliability & Warranty
Avg Temp Coefficient - -0.284%/°C
Bifacial Share 0 (0%) 23 (38%)+38 pp
Avg Warranty - 30.0 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Recom skews to higher efficiency: 33% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Recom offers more 600W+ panels (36% of lineup)

APsystems cell technology
Share of their models by cell architecture
Recom cell technology
Share of their models by cell architecture

Dominant cell tech: TOPCon (84%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a China-founded manufacturer (established 2010, headquartered in Jiaxing, Zhejiang, with earlier Silicon Valley ties, and listed on the Shanghai Stock Exchange since 2022) that is primarily a microinverter and power-electronics specialist rather than a panel maker. It does not carry a Tier 1 panel designation, since that classification applies to module manufacturers, but it has built a strong reputation in its own category, having been ranked the most bankable inverter company worldwide in a 2025 Sinovoltaics report based on Altman Z-score financial analysis. The company reports an installed base of several hundred thousand sites across more than 100 countries and over 6 GW of cumulative installed inverter capacity. Recom Technologies, founded in 2007 with roots in Greece and more recent headquarters cited variously as Milan, Italy and Lannion, France, is a European-based module manufacturer with reported annual production capacity above 3 GW. Recom has at times been associated with Bloomberg Tier 1 module status in older company materials, though current, independently verifiable confirmation of that status was not found in this research. On institutional footprint, APsystems has the clearer recent third-party validation, with a 2025 bankability ranking and public-market listing, while Recom's bankability claims rest on older or self-reported sources.

The two brands are not direct competitors in the same product category. APsystems' core offering is microinverters, including its DS3 and QT2 series, aimed at residential and small commercial rooftop systems where module-level power electronics, rapid shutdown and system monitoring are priorities, and it now carries a 25-year standard warranty on new shipments. Recom, by contrast, manufactures the solar panels themselves, with a product range spanning PERC (Panther series), newer n-type TOPCon modules (Lynx series, with recent high-wattage variants reaching up to 720 W and efficiencies in the 20-23 percent range), heterojunction (HJT), back-contact and shingled cell designs, positioning it across residential, commercial and utility-scale rooftop and ground-mount projects.

Because the two companies sell fundamentally different equipment, they are typically paired together rather than compared as substitutes: a buyer might choose Recom panels combined with APsystems microinverters in the same installation. For a typical buyer evaluating panels specifically, Recom's broader TOPCon and HJT lineup gives more flexibility across project types, while APsystems remains the stronger choice specifically for inverter-level bankability and warranty terms rather than as a panel alternative.

Generated by Claude Sonnet 5 · 2026-11-16

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar Recom
Manufacturers
APsystems AEET
Manufacturers
AIKO Recom
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar Recom
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 2 Recom offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.