Skip to main content

APsystems vs PolyCrown Solar Tech - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
PolyCrown Solar Tech
China Founded 2014
Read the PolyCrown Solar Tech review
At a glance

PolyCrown Solar Tech has the broader catalog (75 vs 0 models). PolyCrown Solar Tech leans bifacial (19% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 75
Highest power
0 Wp 730 Wp
Best efficiency
- 23.7%
Average efficiency
- 21.8%
Bifacial share
0% 19%
Average warranty
- 26 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
PolyCrown Solar Tech

Polycrown Solar Tech Co., Ltd. is a high-tech enterprise founded in 2014, specializing in the research, development, production, and installation of solar products, including solar cells, solar panels, and solar projects. They have passed ISO9001, ISO14001, and OHSAS18001 system certifications, as well as TUV...

Founded
2014
Headquarters
Ningbo, China
Annual capacity
0.2 GW/year
Employees
101-200
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems PolyCrown Solar Tech
Catalog & Power
Panel Models 0 75+75
Max Power 0 W 730 W+730 W
Avg Power 0 W 472 W+472 W
Efficiency
Max Efficiency - 23.69%
Avg Efficiency - 21.75%
Reliability & Warranty
Avg Temp Coefficient - -0.294%/°C
Bifacial Share 0 (0%) 14 (19%)+19 pp
Avg Warranty - 25.9 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

PolyCrown Solar Tech skews to higher efficiency: 12% of lineup is 23%+

Power spread
Share of each catalogue in every power band

PolyCrown Solar Tech offers more 600W+ panels (25% of lineup)

APsystems cell technology
Share of their models by cell architecture
PolyCrown Solar Tech cell technology
Share of their models by cell architecture

Dominant cell tech: N-type (47%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems is a Chinese-founded company (established around 2010, with roots in Silicon Valley) now headquartered in Jiaxing, China, and it is primarily known not as a solar panel maker but as a provider of microinverters and other module-level power electronics, along with energy storage and rapid-shutdown devices. In 2025 it was ranked first in Sinovoltaics' global inverter bankability report, and its cumulative microinverter shipments passed 1 GW by the end of 2020, giving it a substantial institutional and manufacturing footprint in the MLPE segment specifically. PolyCrown Solar Tech, by contrast, is a smaller Ningbo-based panel manufacturer founded in 2014, holding standard ISO9001, ISO14001, and TUV IEC61215/IEC61730 certifications, with a reported annual panel production capacity in the range of 200 MW, a figure typical of a regional or niche supplier rather than a globally ranked Tier 1 producer. Between the two, APsystems clearly has the stronger institutional footprint and more independently verifiable bankability standing, though it is worth stressing that the two companies are not really direct competitors in the same product category.

APsystems' product lines center on single- and three-phase microinverters (such as the YC series and the newer QT2 and QS2 models) aimed at residential and commercial rooftop installations where module-level monitoring, shade tolerance, and rapid-shutdown compliance matter, plus an expanding energy storage lineup. PolyCrown's catalog, based on available datasheets, consists of conventional polycrystalline and monocrystalline panels spanning roughly 70 W to 400 W-class modules, with efficiencies in the high-teens to just over 20 percent and warranties that vary by model (commonly 10 to 25 years on materials), positioning it as a budget-to-mid-range supplier for smaller residential or off-grid projects rather than utility-scale deployments; no confirmation of advanced cell technology such as TOPCon or HJT was found for PolyCrown's lineup.

For a typical 2025 buyer, the comparison is really apples to oranges: anyone choosing solar panels specifically would find far more independent performance data, certifications, and market presence behind established Tier 1 panel brands than behind PolyCrown, whose public record is limited mostly to spec sheets and a single installer testimonial. APsystems, meanwhile, is a reasonable default if the need is for microinverters or storage electronics rather than panels themselves. Buyers should not treat this as a straightforward panel-versus-panel decision without first confirming which product category each company is actually meant to supply.

Generated by Claude Sonnet 5 · 2026-11-18

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar PolyCrown Solar Tech
Manufacturers
APsystems AEET
Manufacturers
AIKO PolyCrown Solar Tech
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar PolyCrown Solar Tech
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.