Skip to main content

APsystems vs Jetion - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
Jetion
China Founded 2004 Tier 1
Read the Jetion review
At a glance

Jetion has the broader catalog (95 vs 0 models). Jetion leans bifacial (92% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 95
Highest power
0 Wp 800 Wp
Best efficiency
- 24.3%
Average efficiency
- 22.6%
Bifacial share
0% 92%
Average warranty
- 29 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
Jetion

Jetion Solar specializes in the research, development, production, and sales of solar PV products. The company has achieved significant accomplishments in terms of production capacity and innovative designs. Jetion Solar joined CNBM (China National Building Materials Group Corporation) in 2014.

Founded
2004
Headquarters
Jiangyin, Wuxi, Jiangsu, China
Annual capacity
2.5 GW/year
Employees
1500-3000
Tier 1 bankable
Yes
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems Jetion
Catalog & Power
Panel Models 0 95+95
Max Power 0 W 800 W+800 W
Avg Power 0 W 583 W+583 W
Efficiency
Max Efficiency - 24.30%
Avg Efficiency - 22.61%
Reliability & Warranty
Avg Temp Coefficient - -0.274%/°C
Bifacial Share 0 (0%) 87 (92%)+92 pp
Avg Warranty - 29.3 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

Jetion skews to higher efficiency: 34% of lineup is 23%+

Power spread
Share of each catalogue in every power band

Jetion offers more 600W+ panels (44% of lineup)

APsystems cell technology
Share of their models by cell architecture
Jetion cell technology
Share of their models by cell architecture

Dominant cell tech: TOPCon (60%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

APsystems, headquartered in Jiaxing, China and founded around 2010 as Altenergy Power System, is primarily known as a maker of microinverters and other module-level power electronics (MLPE) rather than as a panel manufacturer in the traditional sense. The company is publicly listed in China and was named the most bankable inverter company worldwide in Sinovoltaics' 2025 report, which assessed financial stability using the Altman Z-score methodology, and it holds certifications across its microinverter and rapid-shutdown product lines. Jetion Solar, by contrast, is a Jiangsu-based photovoltaic module manufacturer founded in 2004, listed on London's AIM in 2007, and absorbed into China National Building Material Group (CNBM) in the early 2010s. Jetion operates multiple manufacturing sites, including an early overseas plant in Thailand, and cites module shipments exceeding 10 GW cumulatively, though no independent source in available searches confirms it on a current Tier 1 or BloombergNEF bankability list. On institutional footprint, APsystems has a clearer, independently verified bankability credential in its own product category, while Jetion's scale claims rely mainly on company-published material.

Because the two companies occupy different parts of the solar value chain, direct product comparison is limited: APsystems' typical use case is residential and small commercial rooftops needing module-level monitoring, rapid shutdown compliance, and resilience against single-panel shading or failure, with recent additions like the QS2 quad microinverter targeting higher-wattage panel pairings. Jetion's product lines are physical PV modules, including dual-glass monocrystalline panels in the 600 W-plus class, generally positioned for budget-to-midrange residential and commercial rooftop installs and some utility-scale supply, with company materials also referencing planned expansion into heterojunction (HJT) cell capacity, though independent confirmation of current cell technology mix was not found.

Given this, the two brands are not true substitutes for a typical buyer: someone choosing a panel brand should evaluate Jetion against independently verified Tier 1 module makers before committing, since no neutral source in this research confirmed its tier status, while APsystems is a reasonable default when the buying decision concerns inverter and MLPE hardware specifically, given its documented 2025 bankability ranking. Buyers assembling a full system should treat the two as complementary rather than competing choices.

Generated by Claude Sonnet 5 · 2026-11-13

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar Jetion
Manufacturers
APsystems AEET
Manufacturers
AIKO Jetion
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar Jetion
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Shop prices: See 2 Jetion offers

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.