Skip to main content

APsystems vs IBC Solar - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
IBC Solar
Germany Founded 1982
Read the IBC Solar review
At a glance

IBC Solar has the broader catalog (33 vs 0 models). IBC Solar leans bifacial (45% of lineup).

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 33
Highest power
0 Wp 720 Wp
Best efficiency
- 23.2%
Average efficiency
- 22.1%
Bifacial share
0% 45%
Average warranty
- 30 yrs
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
IBC Solar

IBC Solar is a leading full-service provider of energy solutions and services in the field of photovoltaics and storage. The company offers complete photovoltaic systems and covers the entire product range from planning to the turnkey handover of photovoltaic systems. As a manufacturer-independent company, IBC SOLAR...

Founded
1982
Headquarters
Bad Staffelstein, Germany
Annual capacity
11+ GW/year
Employees
500
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems IBC Solar
Catalog & Power
Panel Models 0 33+33
Max Power 0 W 720 W+720 W
Avg Power 0 W 459 W+459 W
Efficiency
Max Efficiency - 23.18%
Avg Efficiency - 22.14%
Reliability & Warranty
Avg Temp Coefficient - -0.309%/°C
Bifacial Share 0 (0%) 15 (45%)+45 pp
Avg Warranty - 30.0 yrs

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band

IBC Solar skews to higher efficiency: 6% of lineup is 23%+

Power spread
Share of each catalogue in every power band

IBC Solar offers more 600W+ panels (9% of lineup)

APsystems cell technology
Share of their models by cell architecture
IBC Solar cell technology
Share of their models by cell architecture

Dominant cell tech: TOPCon (39%)

04

The flagships

Highest-power models from each brand
APsystems all models
No panels from this manufacturer are in the database yet.
05

Written summary

Checking cache...

IBC Solar is a German company founded in 1982 in Bad Staffelstein by Udo Möhrstedt, originally as a battery and solar consultancy that evolved into a vertically oriented solar business; it markets its own-brand modules (historically under the Megaline name) alongside systems integration and project development, and operates subsidiaries in markets such as the Netherlands, South Africa, India, Japan and Singapore. It is a long-established European brand with a multi-decade track record, though independent sources do not place it among the largest global module producers by gigawatt output, and no confirmed BloombergNEF Tier 1 listing was found for it in current searches. APsystems, by contrast, is a Chinese company founded around 2010 in Jiaxing (with some accounts citing Silicon Valley origins), now listed on Shanghai's STAR Market, and it is primarily a microinverter and power-electronics manufacturer rather than a panel maker; it has historically ranked among the top global microinverter suppliers by shipment share and promotes a bankability ranking from Sinovoltaics, though this is not equivalent to a BloombergNEF Tier 1 module listing. Institutionally, IBC Solar has the longer, more diversified European footprint as a module and systems brand, while APsystems has the stronger specialized position within the microinverter segment specifically.

Because the two companies largely operate in different product categories, a direct side-by-side is somewhat apples-to-oranges. IBC Solar's typical offering centers on own-brand and partner-sourced crystalline silicon modules for residential and commercial rooftops in Europe, paired with full-system integration services; detailed confirmation of its current dominant cell technology (PERC, TOPCon, or HJT) was not available in these searches. APsystems' core products are microinverters, such as the DS3, QT2 and the newer EZ1 plug-in unit aimed at balcony and DIY solar markets, used to optimize per-panel energy harvest and enable module-level monitoring in residential and small commercial installations; its recent warranty extension to 25 years on DS3 and QT2 signals a push toward longer-term bankability, though independent customer reviews on platforms like EnergySage have been mixed.

Given the category mismatch, there is no single better default: a buyer choosing panels would look to IBC Solar's module and systems-integration track record, while a buyer specifically selecting inverter-level electronics, especially for DIY or balcony solar setups, would consider APsystems. Readers evaluating a full solar installation should treat these as complementary rather than competing choices, and verify current certifications and warranty terms directly before purchase.

Generated by Claude Sonnet 5 · 2026-11-13

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar IBC Solar
Manufacturers
APsystems AEET
Manufacturers
AIKO IBC Solar
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar IBC Solar
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.