Skip to main content

APsystems vs DAON - solar panel manufacturer comparison

APsystems
China Founded 2010
Read the APsystems review
VS
DAON
Headquarters not published
Read the DAON review
At a glance

Both brands are closely matched on catalog size, efficiency and bifacial share - the choice comes down to local availability, price and specific model features.

Both catalogues are read from the manufacturers' own datasheets. A brand is not scored against the market here, only against the other brand on this page.

Panel models
0 0
Highest power
0 Wp 0 Wp
Best efficiency
- -
Average efficiency
- -
Bifacial share
0% 0%
Average warranty
- -
01

The two companies

Company facts, not datasheet figures
APsystems

APsystems (Altenergy Power System, operating as Yuneng Technology) is a global manufacturer specializing in multi-module microinverters, energy storage systems, and rapid shutdown devices for residential and commercial solar installations. Founded in Silicon Valley in 2010 and now headquartered in China with a major...

Founded
2010
Headquarters
Jiaxing, China
Employees
500-1000
02

Catalogue against catalogue

Averages over every model in the database
Metric APsystems DAON
Catalog & Power
Panel Models 0 0
Max Power 0 W 0 W
Avg Power 0 W 0 W
Efficiency
Max Efficiency - -
Avg Efficiency - -
Reliability & Warranty
Avg Temp Coefficient - -
Bifacial Share 0 (0%) 0 (0%)
Avg Warranty - -

An average over a catalogue describes the range a manufacturer publishes, not the module you would buy. A brand with two flagship panels and eighty older ones averages worse than one that has retired its back catalogue.

03

What each of them builds

Cell technology across the market
Efficiency spread
Share of each catalogue in every efficiency band
Power spread
Share of each catalogue in every power band
APsystems cell technology
Share of their models by cell architecture
DAON cell technology
Share of their models by cell architecture
05

Written summary

Checking cache...

APsystems is a US founded (Silicon Valley, 2009-2010) company with manufacturing ties to Jiaxing, China, and is publicly listed on the Shanghai STAR Market as Yuneng Technology (688348.SS). It is important to note that APsystems is not a solar panel maker but a microinverter and energy storage specialist, known for multi-module and three-phase microinverter designs such as the YC series and the newer QS2 and QT2 units. In September 2025 it was ranked first in Sinovoltaics' global inverter bankability report, a financial-health assessment rather than the BloombergNEF Tier 1 panel designation, and cumulative microinverter shipments passed 1 GW back in 2020. DAON, by contrast, is the module brand of DAS Solar, a Chinese manufacturer founded in 2018 that has pursued aggressive TOPCon capacity expansion, with company-stated plans to reach roughly 40 to 45 GW of combined cell and module capacity by 2024 and TOPCon cell efficiencies reported above 24.8 percent in mass production. Because the two companies sit in different segments of the supply chain, APsystems carries the stronger, independently documented institutional footprint in its own category (public listing, third-party bankability ranking), while DAON's claims to scale and efficiency currently rest mainly on manufacturer statements and trade-press interviews rather than independent verification.

In practical terms the two brands are not direct substitutes. APsystems products are the electronics layer, used alongside any panel brand to convert and manage power at the module level, and they are typically specified for residential and small commercial rooftops where rapid-shutdown compliance, panel-level monitoring, and shade tolerance matter, plus a growing storage and balcony-solar lineup. DAON modules are the panels themselves, with three n-type TOPCon series spanning residential (Mini, 420 to 440 W), commercial and industrial rooftop, and utility-scale ground-mount (Pro, 615 to 640 W) applications, backed by a linear warranty claiming no more than 1 percent first-year degradation and 0.4 percent annually thereafter, according to the manufacturer.

Given this, a fair 2025 comparison should not pick a single winner, since a typical residential buyer may well end up using DAON panels paired with APsystems microinverters in the same installation. For panel procurement, DAON's figures need independent verification such as PVEL or Kiwa testing before being treated as settled, whereas APsystems has a more externally substantiated bankability record in its own niche. Buyers evaluating DAON should ask installers for third-party test data, while buyers evaluating APsystems can rely more comfortably on its public listing and bankability ranking as proxies for financial stability.

Generated by Claude Sonnet 5 · 2026-11-19

06

Other brand comparisons

Build your own
Manufacturers
APsystems A.B. Energy
Manufacturers
AE Solar DAON
Manufacturers
APsystems AEET
Manufacturers
AIKO DAON
Manufacturers
APsystems AKCOME
Manufacturers
ARTsolar DAON
Something missing from a catalogue? Both lists are built from the datasheets in the database. If a model is absent, it has not been ingested yet.

Comparisons are computed from manufacturer datasheets held in the ComparePV database and may not reflect a brand's complete current lineup. Nothing on this page is paid placement.