Skip to main content
WINAICO WST-440NGX54-AA

WINAICO WST-440NGX54-AA

440 Wp TOPCon Bifacial 80%
ComparePV verdict

Space saver, weak in heat

Rank 9,115 of 14,354
Compare panels Datasheet PDF
Power (Wp)
440
Typical for its class
Efficiency (%)
22.50
Strong · top 10%
Density (Wp/m²)
225.3
Strong · top 8%
Temp (%/°C)
-0.310
Weak · bottom 11%
Weight (kg)
25.0
Weak · 3.0 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The WST-NGX54-AA series is WINAICO's answer to the growing demand for rooftop and ground-mount installations that deliver maximum energy yield with minimal degradation risk over decades of operation. At the core of these modules are N-Type TOPCon cells arranged in a 108-cell half-cut layout, which reduces resistive losses and improves resistance to microcracks compared with conventional P-Type panels. Thanks to bifacial technology, the module also captures light reflected from the surrounding surface, boosting energy production on bright roofs, gravel, or grass without any additional investment cost. The glass-glass construction, featuring tempered glass on both sides, delivers high mechanical rigidity, strong resistance to snow and wind loads, and significantly extends service life in harsh weather conditions. The manufacturer backs this durability with a 30-year linear power warranty and a very low annual power degradation rate, translating into a stable return on investment. The series performs equally well in residential and commercial installations where high power density per square meter of roof and predictable energy output over the full service life are essential.

Ranking

1,232 panels in the segment TOPCon 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.50% 22.00% Strong · top 10% 4,394
Power density 225.3 220.2 Strong · top 8% 4,268
Temperature coefficient -0.310 -0.290 Weak · bottom 11% 8,230
Weight per kWp 56.8 51.7 Weak · bottom 15% 11,124
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

7 positive · 4 caution
Best for

Residential and commercial.

Not ideal for

Hot climates and weight-limited structures.

Strengths
225.3 watts per square metre

Top 8% of the TOPCon 400-450 W segment, against a median of 220.2. Ranked 4,268th in the whole database.

22.50% module efficiency

Top 10% of the TOPCon 400-450 W segment, against a median of 22.00%. Ranked 4,394th in the whole database.

Watch-outs
-0.310 %/°C temperature coefficient

Bottom 11% of the TOPCon 400-450 W segment, against a median of -0.290.

56.8 kg per kWp

Bottom 15% of the TOPCon 400-450 W segment, against a median of 51.7.

What owners get
N-Type TOPCon cell technology

The use of N-Type TOPCon cells in a half-cut 108-cell layout reduces resistive losses and LID compared to older P-Type PERC modules, which at 440-450 Wp and 22.5-23% efficiency delivers higher annual yield and better high-temperature performance.

Bifacial glass-glass construction

The bifacial design captures light reflected from the ground surface, boosting energy output on bright roofs, gravel, or grass at no added installation cost, while the dual tempered glass improves mechanical rigidity and resistance to snow and wind loads.

30-year linear power warranty

A 30-year power warranty exceeds the standard 25-year terms offered by many tier-1 manufacturers, and combined with low annual degradation translates into more predictable, stable returns throughout the system's operating life.

Established tier-1 manufacturer from Taiwan

WINAICO has operated since 2003 and is recognized as a bankable tier-1 manufacturer, which combined with a 15-year product warranty gives investors and financing institutions a high level of confidence in long-term support.

Competitive power density per m²

Up to 450 Wp at up to 23% efficiency puts the WST-NGX54-AA series on par with comparable models like the SunKean/Sunket SKT430~450M10-108D5 (450 Wp, 23.04%) and clearly ahead of the Sunova Tangra S Pro HD (450 Wp, 22.5%), which matters on space-constrained roofs.

Trade-offs
Slightly lower efficiency than segment leaders

Maximum efficiency of 23% is marginally below comparable models from SunKean and Sunket New Energy (SKT430~450M10-108D5, 23.04%), meaning a slightly smaller yield on the same mounting area in practice.

No long-term field performance data yet

The WST-NGX54-AA series launched in 2025, so there is no multi-year field data yet confirming real-world power degradation, unlike WINAICO's more established WST-NGX-D3 family available since 2023/2024.

Notes from the database
  • At 22.5% efficiency, this panel is on par with typical TOPCon 400-450W modules
  • At 225.3 W/m² power density, this panel generates 5.1 W/m² more per unit area than TOPCon 400-450W median (220.2 W/m²)
  • -0.31%/°C temperature coefficient - 0.02pp worse than TOPCon 400-450W median (-0.29%/°C), expect higher hot weather losses
  • Weight of 25.0 kg is 3.0 kg above TOPCon 400-450W median (22.0 kg) - verify structural support
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 440 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.50 % Strong Segment median 22.00%
Vmpp · Impp 32.70 V · 13.46 A Operating point at max power
Voc · Isc 38.98 V · 14.41 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1722×1134×40 mm · 1.95 m² of roof
Weight 25.0 kg Weak Weak · 3.0 kg above median
Cells 108 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.310 %/°C Weak bottom 11% of its segment
Coefficient Voc · Isc -0.250 · 0.050 %/°C
Product warranty 15 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 385 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by WINAICO in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 440 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.310 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
WINAICO WST-440NGX54-AA 440 W 22.50% -0.310 25.0 kg You are here
JKM490T-48HL6M-DB 490 W 24.52% -0.240 22.0 kg +50 W, cooler, +2.0 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +50 W, cooler, +2.0 pp
STP-NT11/48QGSF-490 490 W 24.50% -0.260 21.5 kg +50 W, cooler, +2.0 pp
JAT54S40-485/LR 485 W 24.30% -0.260 19.3 kg Cooler, lighter, +1.8 pp
AIKO-A485-MCE54Mw 485 W 24.30% -0.260 21.0 kg +45 W, cooler, +1.8 pp
AIKO-A485-MAH54Mw 485 W 24.30% -0.260 21.5 kg +45 W, cooler, +1.8 pp
GK-5-54HG-485M 485 W 24.30% -0.260 21.0 kg +45 W, cooler, +1.8 pp
WST-400MGX-P3 Full Black 400 W 20.44% -0.350 21.5 kg -40 W, -2.1 pp, -5 yr warranty
WST-400MGX-P1 Full Black 400 W 20.42% -0.350 21.5 kg -40 W, -2.1 pp, -5 yr warranty
WST-405MGX-E5 405 W 20.80% -0.320 21.7 kg -35 W, -1.7 pp, -5 yr warranty
WST-405MGX-P3 405 W 20.70% -0.350 21.5 kg Hotter, -1.8 pp, -5 yr warranty
WST-410MGX-P3 410 W 20.95% -0.350 21.5 kg Hotter, -1.6 pp, -5 yr warranty
WST-410MGX-E3 410 W 21.00% -0.340 21.6 kg Lighter, -1.5 pp, -5 yr warranty
JKM510T-48HL6M-DB 510 W 25.52% -0.240 22.0 kg +70 W, cooler, +3.0 pp
JKM505T-48HL6M-DB 505 W 25.27% -0.240 22.0 kg +65 W, cooler, +2.8 pp
JKM500T-48HL6M-DB 500 W 25.02% -0.240 22.0 kg +60 W, cooler, +2.5 pp

Found 1839 panels of the same or similar size to this one, within ±10 mm. See them here Found 1970 panels of the same or similar size to this one, within ±25 mm. See them here Found 3497 panels of the same or similar size to this one, within ±50 mm. See them here Found 4125 panels of the same or similar size to this one, within ±100 mm. See them here

About the WST-NGX54-AA series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

How does N-Type TOPCon cell technology in WINAICO WST-NGX54-AA panels differ from standard P-Type cells?
N-Type TOPCon cells have lower resistive losses and higher resistance to microcracks and LID degradation compared to classic P-Type PERC cells. Thanks to the TOPCon passivation layer, the panel achieves higher conversion efficiency and more stable performance at high temperatures, resulting in greater annual energy yield, especially in summer.
Are WINAICO WST-NGX54-AA bifacial panels suitable for a flat roof with white coating?
Yes, the bifacial modules in this series also capture light reflected from the surface below, so bright surfaces such as white roofing membranes, gravel, or TPO foil increase energy production from the rear side of the panel at no additional investment cost. The gain depends on mounting height and ground albedo, but typically amounts to a few percent extra energy per year.
What warranty does WINAICO offer on the WST-NGX54-AA series and what does it cover?
WINAICO provides a 15-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. This means the manufacturer guarantees a minimum power generation level over three decades, with very low annual degradation, giving investors predictable returns on the installation.
What is the maximum power output of a WST-NGX54-AA panel and how many modules are needed for a typical 10 kWp system?
Panels in the WST-NGX54-AA series reach a maximum power of up to 450 Wp. For a 10 kWp installation, you'd need around 22-23 modules, allowing relatively high power density on limited roof space thanks to the 108-cell half-cut configuration.
Will the glass-glass construction of WINAICO panels hold up in regions with heavy snowfall?
Yes, the dual tempered glass construction provides high mechanical rigidity and resistance to snow loads and strong wind, which matters for both ground-mount and rooftop installations in harsher climates. This design also reduces the risk of microcracks and extends panel lifespan compared to traditional glass-foil backsheet modules.
Is WINAICO a reliable manufacturer, and where are WST-NGX54-AA modules produced?
WINAICO is a Tier-1 manufacturer headquartered in Taiwan, with over a decade of presence in the solar market, known for strict production quality control and long-term warranties. Tier-1 status indicates financial stability and bankability, which matters for financing larger commercial projects.
Add to compare