Skip to main content
WINAICO WST-440NGX-D3

WINAICO WST-440NGX-D3

440 Wp N-type Bifacial 80%
ComparePV verdict

Space saver, weak in heat

Rank 5,542 of 14,354
Compare panels Datasheet PDF
Power (Wp)
440
Strong · top 23%
Efficiency (%)
22.50
Strong · top 10%
Density (Wp/m²)
225.3
Strong · top 8%
Temp (%/°C)
-0.300
Weak · bottom 23%
Weight (kg)
21.4
Strong · top 22%
Warranty (yrs)
30
Typical · median 30 yrs

The WINAICO WST-NGX-D3 series consists of bifacial N-type TOPCon modules designed for residential installations that need to squeeze maximum energy output from limited roof space. The use of N-type monocrystalline cells together with a glass-glass construction gives these panels greater resistance to degradation and a longer service life compared to conventional P-type modules. Thanks to bifaciality of up to 80 percent, the panels also capture light reflected off the ground or roof surface, delivering an extra energy yield without increasing the footprint of the array. The series stands out for its PID and LID resistance, which limits power loss in the early years of operation, as well as strong performance in low-irradiance conditions, a real advantage on overcast days or when the sun sits low on the horizon. WINAICO backs the series with a 30-year product warranty and a linear performance guarantee, with annual degradation capped at 0.4 percent, translating into over 87 percent retained output after three decades. It is a solid choice for installers and homeowners seeking a durable, high-performing premium panel built to withstand extreme environmental conditions and backed by a long-term manufacturer guarantee.

Ranking

348 panels in the segment N-type 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 22.50% 21.99% Strong · top 10% 4,394
Power density 225.3 218.8 Strong · top 8% 4,268
Temperature coefficient -0.300 -0.290 Weak · bottom 23% 6,298
Weight per kWp 48.6 51.8 Strong · top 22% 2,402
Performance warranty 30 yrs 30 yrs Typical 31
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

8 positive · 3 caution
Best for

Residential.

Not ideal for

Hot climates.

Strengths
225.3 watts per square metre

Top 8% of the N-type 400-450 W segment, against a median of 218.8. Ranked 4,268th in the whole database.

22.50% module efficiency

Top 10% of the N-type 400-450 W segment, against a median of 21.99%. Ranked 4,394th in the whole database.

48.6 kg per kWp

Top 22% of the N-type 400-450 W segment, against a median of 51.8.

Watch-outs
-0.300 %/°C temperature coefficient

Bottom 23% of the N-type 400-450 W segment, against a median of -0.290.

What owners get
N-type TOPCon cells instead of P-type

The use of monocrystalline N-type cells in TOPCon technology with glass-glass construction delivers higher resistance to LID and PID degradation and better high-temperature performance than conventional P-type PERC modules, translating into a higher real-world annual energy yield.

30-year linear performance warranty

WINAICO guarantees annual power degradation not exceeding 0.4%, meaning over 87% of rated power is retained after three decades - a longer performance warranty period than the standard 25 years offered by many Tier-1 manufacturers.

Bifaciality up to 80%

A bifaciality factor of up to 80% allows the module to capture light reflected from the ground (e.g., light-colored roofing, snow, gravel), generating an additional energy gain without increasing the installation footprint - a significant advantage on roof-constrained residential sites.

Tier-1 manufacturer with two decades of track record

WINAICO (Taiwan, founded in 2003) is a bankable Tier-1 manufacturer, which in practice means lower financial risk for investors and easier access to project financing for PV installations based on this series.

High unit power up to 540 Wp

The series spans 9 variants from 430 to 540 Wp at 22-23% efficiency, allowing flexible sizing to the available roof area without sacrificing performance, suitable for both small and larger residential installations.

Trade-offs
Efficiency slightly below segment leader

The maximum efficiency of 23% is marginally below competitor Horay Solar's HS 199R-120 TC-D Delta (23.1% at the same 540 Wp power), giving that series a slightly higher yield per square meter on identical roof area.

Product warranty varies by variant

Product warranty across the series ranges from 25 to 30 years depending on the specific power variant - not all models in the 430-540 Wp range receive the maximum 30-year product warranty, so the datasheet of the specific model should be checked before purchase.

Notes from the database
  • Efficiency of 22.5% matches the N-type 400-450W median
  • 225.3 W/m² power density - 6.5 W/m² more than N-type 400-450W median (218.8 W/m²), more power per roof area
  • Temperature coefficient of -0.30%/°C matches the N-type 400-450W median
  • Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface
  • Ranked #4394 out of 14354 panels for efficiency in the database

Specifications

Open datasheet PDF
Nominal power (Pmax) 440 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 22.50 % Strong Segment median 21.99%
Vmpp · Impp 33.26 V · 13.23 A Operating point at max power
Voc · Isc 38.88 V · 13.98 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1722×1134×35 mm · 1.95 m² of roof
Weight 21.4 kg Strong Strong · top 22%
Cells 108 · N-type Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.300 %/°C Weak bottom 23% of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 42 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 87.4 % Equals 385 W guaranteed
Degradation 1.00 → 0.40 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by WINAICO in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 440 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.300 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
WINAICO WST-440NGX-D3 440 W 22.50% -0.300 21.4 kg You are here
JKM490T-48HL6M-DB 490 W 24.52% -0.240 22.0 kg +50 W, cooler, +2.0 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +50 W, cooler, +2.0 pp
STP-NT11/48QGSF-490 490 W 24.50% -0.260 21.5 kg +50 W, cooler, +2.0 pp
JAT54S40-485/LR 485 W 24.30% -0.260 19.3 kg +45 W, cooler, +1.8 pp
AIKO-A485-MCE54Mw 485 W 24.30% -0.260 21.0 kg +45 W, cooler, +1.8 pp
AIKO-A485-MAH54Mw 485 W 24.30% -0.260 21.5 kg +45 W, cooler, +1.8 pp
GK-5-54HG-485M 485 W 24.30% -0.260 21.0 kg +45 W, cooler, +1.8 pp
WST-400MGX-P3 Full Black 400 W 20.44% -0.350 21.5 kg Hotter, -2.1 pp, -5 yr warranty
WST-400MGX-P1 Full Black 400 W 20.42% -0.350 21.5 kg Hotter, -2.1 pp, -5 yr warranty
WST-405MGX-E5 405 W 20.80% -0.320 21.7 kg -35 W, -1.7 pp, -5 yr warranty
WST-405MGX-P3 405 W 20.70% -0.350 21.5 kg Hotter, -1.8 pp, -5 yr warranty
WST-410MGX-P3 410 W 20.95% -0.350 21.5 kg Hotter, -1.6 pp, -5 yr warranty
WST-410MGX-E3 410 W 21.00% -0.340 21.6 kg Hotter, -1.5 pp, -5 yr warranty
JKM510T-48HL6M-DB 510 W 25.52% -0.240 22.0 kg +70 W, cooler, +3.0 pp
JKM505T-48HL6M-DB 505 W 25.27% -0.240 22.0 kg +65 W, cooler, +2.8 pp
JKM500T-48HL6M-DB 500 W 25.02% -0.240 22.0 kg +60 W, cooler, +2.5 pp

Found 1839 panels of the same or similar size to this one, within ±10 mm. See them here Found 1970 panels of the same or similar size to this one, within ±25 mm. See them here Found 3497 panels of the same or similar size to this one, within ±50 mm. See them here Found 4125 panels of the same or similar size to this one, within ±100 mm. See them here

About the WST-NGX-D3 series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

Are WINAICO WST-NGX-D3 panels suitable for a typical single-family home roof?
Yes, the WST-NGX-D3 series is designed specifically for residential installations. With power output up to 540 Wp, it delivers high energy yield from a limited roof area, which matters on the smaller roof sections typical of single-family homes. The glass-glass construction adds mechanical durability, important for wind and snow loads on pitched roofs.
What does 80% bifaciality mean for WST-NGX-D3 panels, and will it translate into real energy gains?
Bifaciality up to 80% means the rear side of the panel can generate up to 80% of the output of the front side by capturing light reflected off the ground surface. In practice this delivers extra energy yield, especially over bright, reflective surfaces like white gravel or metal roofing. The actual gain depends on mounting height and ground albedo, but requires no increase in installed area.
What is the difference between the N-type TOPCon cells in the WST-NGX-D3 and classic P-type panels?
N-type TOPCon cells used in the WST-NGX-D3 series offer higher resistance to degradation and a lower power loss over time compared to cheaper P-type cells. They also perform better under low irradiance, resulting in higher energy production on cloudy days and at low sun angles, such as in winter or early morning.
What warranty covers WINAICO WST-NGX-D3 panels, and how much power will they retain after 30 years?
WINAICO provides a 30-year product warranty and a linear power performance warranty for the WST-NGX-D3 series. Annual degradation does not exceed 0.4%, meaning the panels retain over 87% of their initial output after three decades. This is one of the longest warranties on the market for residential-segment solar panels.
Are WST-NGX-D3 panels resistant to PID and LID, and what does that mean for the buyer?
Yes, the WST-NGX-D3 series is resistant to PID (Potential Induced Degradation) and LID (Light Induced Degradation), two mechanisms responsible for premature power loss in PV modules. For buyers this means less early-life performance loss and more stable energy output throughout the system's service life, consistent with the stated power warranty.
Is WINAICO, a Taiwan-based manufacturer, a reliable choice for a home solar installation?
WINAICO is a Tier 1 manufacturer based in Taiwan, operating in the PV market for over a decade with its own production facilities, enabling tighter quality control. Tier 1 status indicates financial stability and credibility for long-term warranties, such as the 30-year warranty on the WST-NGX-D3 series, which matters when choosing premium panels for a home.
Add to compare