Skip to main content
SunEvo Solar SE6-60H-595
SunEvo Solar Brand review

SE6-60H-595

595 Wp PERC Bifacial 70%
ComparePV verdict

Warranty pick, weak in heat

Rank 5,778 of 14,129
Compare panels Datasheet PDF
Power (Wp)
595
Strong · top 6%
Efficiency (%)
21.00
Weak · bottom 25%
Density (Wp/m²)
210.2
Typical · median 212.9
Temp (%/°C)
-0.360
Weak · bottom 5%
Weight (kg)
34.8
Weak · 4.0 kg above median
Warranty (yrs)
30
Strong · top 25%

The SunEvo Solar EVO 6 series, including the SE6-60H and bifacial SE6-60HBD models, is a technologically advanced solution based on M10 silicon wafers, which significantly increases power density while maintaining standard module dimensions. The use of Half-Cut cell technology in combination with the Multi-Busbar (MBB) system allows for a drastic reduction in energy losses and improves module performance in partial shading conditions. The SE6-60HBD bifacial version is the ideal response to the needs of investors seeking maximum yield from the surface area, utilizing radiation reflected from the ground to increase total electricity production. These panels effectively solve the problem of component degradation thanks to certified resistance to the PID phenomenon and high durability against snow and wind loads. The EVO 6 series is designed for both modern home micro-installations and large photovoltaic farms, where a low Levelized Cost of Energy (LCOE) is key. Compared to the competition, these modules stand out with an optimized thermal profile, ensuring high efficiency even on hot days, making them a solid foundation for any long-term investment in renewable energy sources in Poland.

Ranking

589 panels in the segment PERC 550-600 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.00% 21.29% Weak · bottom 25% 9,828
Power density 210.2 212.9 Typical 9,740
Temperature coefficient -0.360 -0.350 Weak · bottom 5% 12,425
Weight per kWp 58.5 52.7 Weak · bottom 22% 11,850
Performance warranty 30 yrs 27 yrs Strong · top 25% 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

1 positive · 3 caution
Best for

Residential, utility-scale and shaded-installations.

Not ideal for

Hot climates, weight-limited structures and tight roof space.

Strengths
30 year performance warranty

Top 25% of the PERC 550-600 W segment, against a median of 27 yrs.

Watch-outs
-0.360 %/°C temperature coefficient

Bottom 5% of the PERC 550-600 W segment, against a median of -0.350. Ranked 12,425th in the whole database.

58.5 kg per kWp

Bottom 22% of the PERC 550-600 W segment, against a median of 52.7.

21.00% module efficiency

Bottom 25% of the PERC 550-600 W segment, against a median of 21.29%.

Notes from the database
  • At 21.0% efficiency, this panel is on par with typical PERC 550-600W modules
  • Power density of 210.2 W/m² matches the PERC 550-600W median
  • At -0.36%/°C, hot weather performance is typical for PERC 550-600W panels
  • Weight of 34.8 kg is 4.0 kg above PERC 550-600W median (30.8 kg) - verify structural support
  • 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 595 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.00 % Weak Segment median 21.29%
Vmpp · Impp 34.16 V · 17.41 A Operating point at max power
Voc · Isc 41.25 V · 18.50 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2172×1303×35 mm · 2.83 m² of roof
Weight 34.8 kg Weak Weak · 4.0 kg above median
Cells 120 · PERC Monocrystalline
Bifaciality 70 % Rear output as a share of front
Coefficient Pmax -0.360 %/°C Weak bottom 5% of its segment
Coefficient Voc · Isc -0.280 · 0.050 %/°C
NOCT 43 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Strong top 25% · median 27 yrs
End-of-warranty output 85.0 % Equals 505 W guaranteed
Degradation 2.00 → 0.45 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by SunEvo Solar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 595 Wp appear here. The rest cover the whole series.

Quality Guarantee – 25-Year Linear Power Output Warranty Quality Guarantee – 25-Year Linear Power Output Warranty Whole series Quality Guarantee – 30-Year Linear Power Output Warranty Quality Guarantee – 30-Year Linear Power Output Warranty Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.360 %/°C against a segment median of -0.350
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
SunEvo Solar SE6-60H-595 595 W 21.00% -0.360 34.8 kg You are here
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, lighter, +4.0 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +3.8 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, lighter, +3.8 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +3.6 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg Cooler, lighter, +3.6 pp
SE6-60HBD-590 590 W 20.80% -0.360 34.8 kg Very close match
SE6-60H-600 600 W 21.20% -0.360 34.8 kg Very close match
SE6-60H-605 605 W 21.40% -0.360 34.8 kg +10 W, +0.4 pp
SE6-60H-610 610 W 21.60% -0.360 34.8 kg +15 W, +0.6 pp
SE6-60H-615 615 W 21.70% -0.360 34.8 kg +20 W, +0.7 pp
GKA210N120 680 W 24.03% -0.340 28.0 kg +85 W, lighter, +3.0 pp
GKA210N120-675 675 W 23.85% -0.340 28.0 kg +80 W, lighter, +2.9 pp
QN-670HJT-01 670 W 23.70% -0.240 35.5 kg +75 W, cooler, +2.7 pp
GKA210N120-670 670 W 23.67% -0.340 28.0 kg +75 W, lighter, +2.7 pp
QN-665HJT-01 665 W 23.50% -0.240 35.5 kg +70 W, cooler, +2.5 pp
GKA210N120-665 665 W 23.50% -0.340 28.0 kg +70 W, lighter, +2.5 pp

Found 497 panels of the same or similar size to this one, within ±10 mm. See them here Found 502 panels of the same or similar size to this one, within ±25 mm. See them here Found 502 panels of the same or similar size to this one, within ±50 mm. See them here Found 502 panels of the same or similar size to this one, within ±100 mm. See them here

About the EVO 6 SE6-60H / SE6-60HBD series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of the SunEvo Solar EVO 6 panels and what drives it?
The SunEvo Solar EVO 6 series reaches up to 615 Wp thanks to the combination of PERC cells on M10 silicon wafers (182×182 mm) with half-cut cell technology and a Multi-Busbar (MBB) system. M10 wafers offer a larger active area than older formats, while splitting each cell in half reduces series resistance and thermal losses, delivering higher power density within standard module dimensions.
What warranty does the SunEvo Solar EVO 6 SE6-60H / SE6-60HBD series carry?
SunEvo Solar provides a 12-year product warranty covering material and workmanship defects, and a 30-year linear power warranty. This means the manufacturer guarantees a minimum energy output level for three decades. This is a solid tier for a mid-range module designed for long-term deployments in both residential rooftop systems and utility-scale PV plants.
How does the bifacial SE6-60HBD differ from the standard SE6-60H?
The SE6-60HBD is a bifacial module - both surfaces actively collect irradiance. The rear side harvests light reflected from the ground (light-colored gravel, concrete, or snow), increasing total energy yield by several to over ten percent depending on surface albedo. The monofacial SE6-60H collects energy from the front only - it costs less and performs well on standard rooftops where ground reflection cannot be utilized.
Are EVO 6 panels PID-resistant, and why does that matter for long-term yield?
Yes, the EVO 6 series carries certified PID (Potential Induced Degradation) resistance - a form of accelerated cell degradation caused by high system voltage combined with humidity and heat. In practice, this means the modules maintain efficiency in large DC systems operating above 1,000 V and retain their rated parameters throughout the full 30-year power warranty period, directly protecting the return on investment.
Will the SunEvo Solar EVO 6 series perform well in Central European climate conditions - summer heat and heavy winter snow loads?
Yes. The EVO 6 series is engineered for demanding weather conditions: the manufacturer declares high mechanical resistance to snow and wind loads, while the optimized thermal profile with a low temperature coefficient limits power loss on hot days. Half-cut cell technology also improves resilience against partial shading typical of low winter sun angles or partial panel icing.
Which installation types are SunEvo Solar EVO 6 modules best suited for - residential rooftops or utility-scale PV farms?
The EVO 6 series is designed with both scenarios in mind. High unit power up to 615 Wp and a low LCOE make it attractive for utility-scale developers. At the same time, standard module dimensions and PID resistance make it a viable choice for residential microinstallations. The bifacial SE6-60HBD variant is especially recommended for ground-mounted systems with high-albedo surfaces, where reflected irradiance boosts yield at no additional cost.
Add to compare