Skip to main content
SpolarPV Brand review

SP600HM6-60L

600 Wp PERC
ComparePV verdict

Middle of its segment, short guarantee

Rank 6,290 of 14,005
Compare panels Datasheet PDF
Power (Wp)
600
Weak · bottom 16%
Efficiency (%)
21.20
Typical · median 21.38%
Density (Wp/m²)
212.0
Typical · median 213.8
Temp (%/°C)
-0.340
Typical · median -0.340
Weight (kg)
30.9
Typical · median 34.0 kg
Warranty (yrs)
25
Weak · bottom 16%

The SpolarPV SPHM6-60L series panels are advanced monocrystalline modules that utilize half-cut cell technology to maximize energy yields even in challenging lighting conditions. Thanks to the use of multi-busbar MBB cells, this design effectively reduces losses resulting from internal resistance, which directly translates into higher efficiency for the entire system. This series effectively addresses the problem of performance drops caused by partial shading, offering stable operation where traditional modules fail. The use of PERC technology allows for more efficient absorption of diffused light, making these panels an optimal choice for the Polish climate zone. This solution is primarily dedicated to single-family homeowners and small businesses looking for an attractive price-to-quality ratio without compromising on durability. The modules stand out with increased resistance to extreme snow and wind loads, guaranteeing safe use for decades. Unlike many competing products, the SPHM6-60L places special emphasis on minimizing the risk of the hot-spot effect, which protects the installation from overheating and failure. Choosing this series is a way to achieve maximum energy cost optimization while using proven, modern technological solutions.

Ranking

217 panels in the segment PERC 600-650 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.20% 21.38% Typical 9,076
Power density 212.0 213.8 Typical 9,096
Temperature coefficient -0.340 -0.340 Typical 8,778
Weight per kWp 51.5 55.7 Typical 4,871
Performance warranty 25 yrs 30 yrs Weak · bottom 16% 9,798
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

0 positive · 1 caution
Best for

Residential, commercial, shaded-installations and cold-climate.

Not ideal for

Owners who want a long output guarantee.

Watch-outs
25 year performance warranty

Bottom 16% of the PERC 600-650 W segment, against a median of 30 yrs.

Notes from the database
  • At 21.2% efficiency, this panel is on par with typical PERC 600-650W modules
  • Power density of 212.0 W/m² matches the PERC 600-650W median
  • Temperature coefficient of -0.34%/°C matches the PERC 600-650W median
  • At 30.9 kg, this panel is 3.1 kg lighter than PERC 600-650W median (34.0 kg) - easier handling during installation
  • In the top 65% for efficiency among all PERC panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 600 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.20 % Typical Segment median 21.38%
Vmpp · Impp 34.40 V · 17.44 A Operating point at max power
Voc · Isc 41.50 V · 18.52 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 2172×1303×30 mm · 2.83 m² of roof
Weight 30.9 kg Typical Typical · median 34.0 kg
Cells 120 · PERC Monocrystalline
Coefficient Pmax -0.340 %/°C Typical median -0.340 of its segment
Coefficient Voc · Isc -0.250 · 0.040 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 25 years Weak bottom 16% · median 30 yrs
End-of-warranty output 84.8 % Equals 492 W guaranteed
Degradation 2.00 → 0.55 % First year, then annual

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.340 %/°C against a segment median of -0.340
-

Alternatives

All SpolarPV panels
Filter these
Size
Panel Power Eff. Temp. Weight Difference
SpolarPV SP600HM6-60L 600 W 21.20% -0.340 30.9 kg You are here
AIKO-A650-MAE72Mw 650 W 25.20% -0.260 27.0 kg +50 W, cooler, +4.0 pp
AIKO-A645-MAE72Mw 645 W 25.00% -0.260 27.0 kg Cooler, +3.8 pp, +5 yr warranty
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg Cooler, lighter, +3.6 pp
AIKO-A640-MAE72Mw 640 W 24.80% -0.260 27.0 kg Cooler, +3.6 pp, +5 yr warranty
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg Cooler, lighter, +3.4 pp
AIKO-A635-MAE72Mw 635 W 24.60% -0.260 27.0 kg Cooler, +3.4 pp, +5 yr warranty
SP590HM6-60L 590 W 20.80% -0.340 30.9 kg -10 W, -0.4 pp
SP595HM6-60L 595 W 21.00% -0.340 30.9 kg Very close match
SP605HM6-60L 605 W 21.40% -0.340 30.9 kg Very close match
GKA210N120 680 W 24.03% -0.340 28.0 kg +80 W, +2.8 pp, +5 yr warranty
GKA210N120-675 675 W 23.85% -0.340 28.0 kg +75 W, +2.7 pp, +5 yr warranty
QN-670HJT-01 670 W 23.70% -0.240 35.5 kg +70 W, cooler, +2.5 pp
GKA210N120-670 670 W 23.67% -0.340 28.0 kg +70 W, +2.5 pp, +5 yr warranty
QN-665HJT-01 665 W 23.50% -0.240 35.5 kg +65 W, cooler, +2.3 pp
GKA210N120-665 665 W 23.50% -0.340 28.0 kg +65 W, +2.3 pp, +5 yr warranty
SPDG660-N120M12 660 W 23.32% -0.300 34.2 kg +60 W, +2.1 pp, +5 yr warranty

Found 497 panels of the same or similar size to this one, within ±10 mm. See them here Found 502 panels of the same or similar size to this one, within ±25 mm. See them here Found 502 panels of the same or similar size to this one, within ±50 mm. See them here Found 506 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
Are SpolarPV SPHM6-60L panels still available for purchase?
The SPHM6-60L series has been discontinued by SpolarPV. No new modules from this line are being manufactured, and availability is limited to remaining dealer stock. If you are planning a new installation, ask your distributor about currently produced alternatives featuring PERC half-cut technology in a comparable power range.
What product warranty and power warranty does the SpolarPV SPHM6-60L carry?
SpolarPV provides a 12-year product warranty covering material and workmanship defects. In addition, a 25-year linear power warranty guarantees that the modules will retain a specified percentage of their rated output over a quarter century. This is a standard coverage level for prosumer-grade PERC panels and secures the investment for well over two decades.
What is PERC Half-Cut cell technology used in the SPHM6-60L series, and is it worth the premium?
PERC (Passivated Emitter and Rear Cell) adds a passivation layer to the rear of each cell, improving absorption of diffuse light — a key advantage in Poland's frequently overcast climate. Half-cut means each cell is laser-cut in two, reducing internal resistance and resistive heat losses. Together, these technologies deliver higher real-world energy yield and better partial-shading tolerance than conventional full-cell modules.
How do SpolarPV SPHM6-60L panels handle partial shading from a chimney or nearby trees?
The half-cut architecture combined with multi-busbar (MBB) cells divides the SPHM6-60L module into independent electrical sub-strings. When shade falls on one section, only that section is affected while the rest of the panel continues producing at full capacity. In practice, this results in noticeably lower energy losses on rooftops with chimneys, dormers, or nearby vegetation compared to traditional full-cell modules.
How much energy will a system built with SpolarPV SPHM6-60L 605 Wp panels generate per year?
At a peak rating of 605 Wp, a single SPHM6-60L module will produce approximately 550–650 kWh annually under Polish irradiance conditions, depending on location, tilt angle, and shading. A 10-panel array (roughly 6 kWp) can cover the typical yearly consumption of a four-person household, estimated at 4,000–5,500 kWh. The precise figure always depends on system design and site-specific conditions.
Are the SpolarPV SPHM6-60L panels bifacial, and are they suitable for a pitched roof?
No, the SPHM6-60L series is monofacial — it generates electricity from the front surface only. This is entirely sufficient for standard residential rooftop installations; bifacial modules deliver meaningful gains mainly in ground-mounted systems over highly reflective ground surfaces. For a pitched residential roof the SPHM6-60L is a fully appropriate choice, backed by its rated resistance to extreme snow and wind loads.
Add to compare