Skip to main content
Shinson Technology S280N36BPV
Shinson Technology Brand review

S280N36BPV

280 Wp TOPCon Bifacial
ComparePV verdict

Middle of its segment, modest efficiency

Rank 13,466 of 14,005
Compare panels Datasheet PDF
Power (Wp)
280
Typical for its class
Efficiency (%)
13.91
Weak · bottom 15%
Density (Wp/m²)
139.1
Weak · bottom 22%
Temp (%/°C)
-0.290
Typical · median -0.290
Weight (kg)
30.0
Weak · 6.6 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

Shinson Technology S.blade series photovoltaic panels utilize innovative shingled technology, which eliminates traditional busbar connections between cells. Thanks to overlapping cells, these modules offer maximum utilization of the active surface area, which directly translates into higher energy yield per square meter. This solution effectively reduces the risk of micro-cracks and minimizes energy losses resulting from shading, which is crucial in dense urban areas. Shingled cell technology makes the panels exhibit much better aesthetics, creating a uniform, almost black surface, ideal for modern architecture. The S.blade design is also characterized by a low temperature coefficient, allowing for stable operation even on hot days. This series is dedicated to investors seeking uncompromising performance and increased resistance to mechanical loads, such as snow or strong wind. By choosing S.blade, the user receives a product that stands out from the competition not only due to its unique appearance but above all due to increased tolerance to partial shading, which optimizes the operation of the entire system in difficult installation conditions. It is an excellent choice for residential and commercial installations where every watt of power counts.

Ranking

30 panels in the segment TOPCon 250-300 W
Metric This panel Median Position in segment Overall rank
Module efficiency 13.91% 14.99% Weak · bottom 15% 13,929
Power density 139.1 149.9 Weak · bottom 22% 13,911
Temperature coefficient -0.290 -0.290 Typical 2,165
Weight per kWp 107.1 79.5 Weak · bottom 22% 13,945
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

0 positive · 3 caution
Best for

Residential, commercial, shaded-installations and hot-climate.

Not ideal for

Tight roof space, roofs where every square metre has to count and weight-limited structures.

Watch-outs
13.91% module efficiency

Bottom 15% of the TOPCon 250-300 W segment, against a median of 14.99%.

139.1 watts per square metre

Bottom 22% of the TOPCon 250-300 W segment, against a median of 149.9.

107.1 kg per kWp

Bottom 22% of the TOPCon 250-300 W segment, against a median of 79.5.

Notes from the database
  • Efficiency of 13.9% is 2.1pp below the TOPCon 0-400W median (16.0%)
  • At 139.1 W/m², this panel generates 20.7 W/m² less per unit area than TOPCon 0-400W median (159.8 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 0-400W median
  • At 30.0 kg (6.5 kg above TOPCon 0-400W median of 23.5 kg), requires checking roof load capacity
  • In the top 99% for efficiency among all TOPCon panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 280 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 13.91 % Weak Segment median 14.99%
Vmpp · Impp 22.28 V · 12.57 A Operating point at max power
Voc · Isc 25.45 V · 13.29 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1750×1150×7 mm · 2.01 m² of roof
Weight 30.0 kg Weak Weak · 6.6 kg above median
Cells 72 · TOPCon Monocrystalline
Coefficient Pmax -0.290 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.250 · 0.045 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
Degradation 0.40 % Per year after the first

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.290 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Shinson Technology S280N36BPV 280 W 13.91% -0.290 30.0 kg You are here
NS-300MH-72 300 W 23.32% -0.290 12.5 kg 18 kg lighter, +9.4 pp, -5 yr warranty
NS-300MH-72 300 W 23.32% -0.290 12.5 kg 18 kg lighter, +9.4 pp, -5 yr warranty
ZEUS 1.2 FullBlack 280W 280 W 23.31% -0.260 14.3 kg Cooler, 16 kg lighter, +9.4 pp
NS-330MH-80 330 W 23.15% -0.290 15.0 kg +50 W, 15 kg lighter, +9.2 pp
NS-330MH-80 330 W 23.15% -0.290 15.0 kg +50 W, 15 kg lighter, +9.2 pp
GKA182M285W 285 W 23.00% - 10.8 kg 19 kg lighter, +9.1 pp
GKA182M240W 240 W 23.00% - 10.8 kg -40 W, 19 kg lighter, +9.1 pp
GKA182M260W 260 W 23.00% - 10.8 kg -20 W, 19 kg lighter, +9.1 pp
GKA182M270W 270 W 23.00% - 10.8 kg -10 W, 19 kg lighter, +9.1 pp
S265N36BPV 265 W 13.17% -0.290 30.0 kg -15 W, -0.7 pp
S270N36BPV 270 W 13.42% -0.290 30.0 kg -10 W, -0.5 pp
S275N36BPV 275 W 13.66% -0.290 30.0 kg -0.2 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +230 W, lighter, +11.1 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +215 W, lighter, +10.9 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +225 W, lighter, +10.8 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +210 W, lighter, +10.6 pp

Found 14 panels of the same or similar size to this one, within ±10 mm. See them here Found 1514 panels of the same or similar size to this one, within ±25 mm. See them here Found 3529 panels of the same or similar size to this one, within ±50 mm. See them here Found 3701 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
How does the shingled cell technology in Shinson S.blade panels differ from conventional PV modules?
In S.blade modules, cells overlap like slate roof shingles, eliminating the metal busbars between them. This maximizes the active surface area, resulting in higher energy yield per square meter. Removing busbars also reduces the risk of microcracks and minimizes power losses caused by partial shading of individual cells.
What warranty does Shinson Technology offer on the S.blade series?
Shinson Technology backs the S.blade series with a 30-year product warranty covering physical and material defects, plus a 30-year linear power output warranty. This means the manufacturer guarantees a defined performance level for three full decades — one of the longest warranties available in the PV market.
Are Shinson S.blade panels bifacial, and does that matter for a pitched-roof installation?
Yes, the S.blade series are bifacial modules — electricity is generated on both sides of the panel. On a typical pitched roof, the rear side captures light reflected from the roofing surface or surroundings, which can add a few percent to total yield. The greatest bifacial gains come from ground-mount or flat-roof installations with a high-albedo surface beneath the array.
How do Shinson S.blade panels handle partial shading from a chimney, antenna, or dormer window?
Thanks to the shingled cell architecture and the absence of conventional busbars, S.blade modules show improved tolerance to partial shading compared to standard panels. Shadowing one section of the module does not suppress the entire cell string as severely as in traditional designs — a critical advantage in dense urban environments where shading is hard to avoid.
What is TOPCon technology used in the S.blade cells, and what real-world benefits does it provide?
TOPCon (Tunnel Oxide Passivated Contact) is an advanced cell technology in which a thin tunnel oxide layer minimizes charge-carrier recombination. The result is higher conversion efficiency and a lower temperature coefficient compared to PERC cells. TOPCon panels perform better at high summer temperatures, translating into greater annual energy yield even in temperate climates.
What is the peak power of Shinson S.blade panels, and how many modules do I need for a home installation?
S.blade panels reach a peak output of 365 Wp. A standard residential system of 5–10 kWp requires between 14 and 28 modules. The high efficiency of TOPCon cells combined with shingled technology means S.blade delivers more energy from the same roof area than typical PERC panels — a key advantage whenever mounting space is limited.
Add to compare