Skip to main content

Renewsys DESERV EXTREME 120X-500

500 Wp TOPCon Bifacial 80%
ComparePV verdict

Solid all-round for its segment

Rank 6,661 of 14,129
Compare panels Datasheet PDF
Power (Wp)
500
Weak · bottom 10%
Efficiency (%)
23.06
Typical · median 22.74%
Density (Wp/m²)
230.6
Typical · median 227.4
Temp (%/°C)
-0.292
Typical · median -0.290
Weight (kg)
26.5
Typical · median 27.0 kg
Warranty (yrs)
30
Typical · median 30 yrs

The DESERV Extreme 120X series consists of RenewSys solar modules built on M10R TOPCon cells, combining high conversion efficiency with the structural durability of a glass-glass design. The use of half-cut cells arranged in a 120-cell configuration reduces power losses under partial shading and lowers stress-related microcracking, resulting in greater long-term reliability. The bifacial dual-glass construction captures reflected light from the ground surface, boosting energy yield without increasing the installation footprint - a particularly attractive feature for ground-mounted solar farms on reflective terrain and industrial rooftops with large flat surfaces. Replacing the traditional rear backsheet with a second glass layer significantly improves resistance to moisture ingress, microcracks, and PID degradation, extending the module's real-world lifespan and keeping power output stable for decades. Thanks to TOPCon technology, these modules achieve a lower temperature coefficient and reduced first-year degradation compared to conventional PERC panels, directly lowering the project's LCOE. The 120X M10R series is well suited for both commercial installations and demanding utility-scale projects, where predictable return on investment and resilience against harsh environmental conditions are key priorities.

Ranking

435 panels in the segment TOPCon 500-550 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.06% 22.74% Typical 1,748
Power density 230.6 227.4 Typical 1,742
Temperature coefficient -0.292 -0.290 Typical 6,115
Weight per kWp 53.0 52.4 Typical 6,783
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 2 caution
Best for

Commercial, utility-scale and shaded-installations.

What owners get
High efficiency up to 23.06%

M10R TOPCon cells deliver conversion efficiency up to 23.06%, placing the series above comparable models Silfab SIL HM (21%) and Lina Energy LEPV 132 HC ICON PLUS (21.06%) at the same 500 Wp maximum power rating.

30-year linear power warranty

RenewSys offers a 30-year linear power output warranty, a premium standard in the TOPCon segment that exceeds the typical 25-year linear warranties offered by many tier-1 manufacturers, reducing investor risk over the long-term operating horizon.

Bifacial dual-glass construction

A dual-glass design in place of a traditional polymer backsheet significantly improves resistance to PID degradation, moisture ingress, and microcracks, while enabling additional energy yield from reflected albedo - particularly effective on bright ground surfaces at utility-scale farms and large industrial rooftops.

Lower first-year degradation (TOPCon)

N-type TOPCon technology exhibits a lower LID coefficient and better performance at high temperatures than legacy PERC cells, translating into higher real-world annual energy yield and lower LCOE for the installation.

Tier-1 manufacturer, 14 years in operation

RenewSys (founded in 2011, headquartered in India) holds tier-1 bankable status, easing project financing for utility-scale installations where banks require a documented supply track record and financial references.

Trade-offs
Efficiency below segment leader Gokin

Maximum efficiency of 23.06% trails Gokin's GK-3-54HGF (24.5%) at the same 500 Wp maximum power rating - at comparable module area, the competitor delivers higher yield per unit of surface.

Product warranty of 12 years below market maximum

The standard product warranty is 12 years, while some premium TOPCon manufacturers now offer 15-25 year product warranties - this may matter when comparing total cost of ownership in utility-scale projects.

Notes from the database
  • Efficiency of 23.1% matches the TOPCon 500-550W median
  • At 230.6 W/m² power density, this panel generates 3.2 W/m² more per unit area than TOPCon 500-550W median (227.4 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 500-550W median
  • Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof
  • #1748 for efficiency, #6115 for temperature performance out of 14129 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 500 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.06 % Typical Segment median 22.74%
Vmpp · Impp 36.24 V · 13.81 A Operating point at max power
Voc · Isc 44.07 V · 14.48 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1914×1133×35 mm · 2.17 m² of roof
Weight 26.5 kg Typical Typical · median 27.0 kg
Cells 120 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.292 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.276 · 0.057 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs

Datasheet charts

Open datasheet PDF

Measured curves published by Renewsys in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 500 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.292 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Renewsys DESERV EXTREME 120X-500 500 W 23.06% -0.292 26.5 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg Cooler, lighter, +1.9 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg Cooler, lighter, +1.7 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg Cooler, lighter, +1.6 pp
WST-505BKX54-A2 505 W 24.70% -0.260 25.0 kg Cooler, lighter, +1.6 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg Cooler, lighter, +1.4 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg Cooler, lighter, +1.4 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg Cooler, lighter, +1.4 pp
DESERV EXTREME 120X-465 465 W 21.44% -0.292 26.5 kg -35 W, -1.6 pp
DESERV EXTREME 120X-470 470 W 21.67% -0.292 26.5 kg -30 W, -1.4 pp
DESERV EXTREME 120X-475 475 W 21.90% -0.292 26.5 kg -25 W, -1.2 pp
DESERV EXTREME 120X-480 480 W 22.13% -0.292 26.5 kg -20 W, -0.9 pp
DESERV EXTREME 120X-485 485 W 22.37% -0.292 26.5 kg -15 W, -0.7 pp
DESERV EXTREME 120X-490 490 W 22.60% -0.292 26.5 kg -10 W, -0.5 pp
DESERV EXTREME 120X-495 495 W 22.83% -0.292 26.5 kg -0.2 pp
LR7-60HVH-560M 560 W 24.80% -0.260 25.0 kg +60 W, cooler, +1.7 pp
LR7-60HVH-555M 555 W 24.60% -0.260 25.0 kg +55 W, cooler, +1.5 pp

Found 491 panels of the same or similar size to this one, within ±10 mm. See them here Found 767 panels of the same or similar size to this one, within ±25 mm. See them here Found 1282 panels of the same or similar size to this one, within ±50 mm. See them here Found 1474 panels of the same or similar size to this one, within ±100 mm. See them here

About the DESERV Extreme 120X (M10R TOPCon Bifacial Dual Glass) series

6 answered

These answers cover the whole series. Where a figure differs, the specification above is this module's own.

What is the maximum power output of the DESERV Extreme 120X panel and what does it depend on?
Modules in the DESERV Extreme 120X M10R series reach a maximum power output of up to 500 Wp. Actual yield depends on irradiance, tilt angle, and - since this is a bifacial module - on the amount of reflected light hitting the rear side. Bright surfaces such as gravel or white roofing increase the additional energy gain generated from the back of the panel.
How does the dual-glass bifacial design differ from a standard panel with a rear backsheet?
In a dual-glass module, the rear backsheet is replaced with a second glass layer, significantly improving resistance to moisture, microcracks, and PID degradation. The transparent rear side also allows the panel to capture light reflected from the ground, generating extra energy without increasing the installation footprint - a major advantage for solar farms and large industrial rooftops.
What warranty comes with RenewSys DESERV Extreme 120X panels?
The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. RenewSys holds Tier 1 manufacturer status, which adds further confidence in long-term service support and the financial stability behind the warranty.
How does the TOPCon technology in these panels differ from classic PERC cells?
The M10R TOPCon cells offer higher conversion efficiency, a lower temperature coefficient, and less first-year degradation compared to traditional PERC cells. This results in higher and more stable energy yield over the panel's lifetime, ultimately lowering the LCOE compared to similarly rated PERC panels.
Are DESERV Extreme 120X panels suitable for industrial installations and solar farms, or just residential roofs?
The glass-glass construction with bifacial cells and power output up to 500 Wp makes this series primarily suited for commercial and utility-scale projects, where predictable ROI and resistance to harsh conditions matter most. The panels also work well on large flat industrial roofs, though due to their size and weight they are less commonly used on small pitched residential roofs.
Who manufactures the DESERV Extreme 120X modules, and is it a reliable supplier?
The panels are manufactured by RenewSys, an India-based Tier 1 producer, meaning the modules are bankable and recognized by financiers of large PV projects. The company invests in TOPCon and bifacial construction development, making it a trustworthy partner for both commercial investors and utility-scale solar farm developers.
Add to compare