Skip to main content

DESERV Extreme 108X-425

425 Wp TOPCon Bifacial 80%
ComparePV verdict

Middle of its segment, heavy for its output

Rank 10,399 of 14,005
Compare panels Datasheet PDF
Power (Wp)
425
Typical for its class
Efficiency (%)
21.70
Typical · median 22.00%
Density (Wp/m²)
217.0
Typical · median 220.2
Temp (%/°C)
-0.292
Typical · median -0.290
Weight (kg)
24.0
Weak · 2.0 kg above median
Warranty (yrs)
30
Typical · median 30 yrs

The DESERV Extreme 108X series is RenewSys's answer for rooftop installations and smaller commercial projects, where a compact module format matters just as much as high energy performance. The panels use half-cut monocrystalline M10R cells built on TOPCon technology, which reduces power losses under partial shading and improves performance at higher operating temperatures. The bifacial dual-glass construction allows the module to harvest additional energy from light reflected off the ground, boosting the overall yield of the installation without increasing its footprint. This makes the series a strong fit for projects where maximizing output from limited mounting space is a priority. The module features an IP68-rated junction box with three bypass diodes and an anodized aluminum frame, ensuring durability in demanding weather conditions, including resistance to hail and high wind loads. RenewSys backs the series with a 12-year product warranty and a 30-year power output warranty, making it an appealing choice for investors looking for a predictable long-term return. It's a solution aimed at both residential prosumer installers and contractors working on smaller commercial systems who value compact dimensions paired with modern cell technology.

Ranking

1,218 panels in the segment TOPCon 400-450 W
Metric This panel Median Position in segment Overall rank
Module efficiency 21.70% 22.00% Typical 7,421
Power density 217.0 220.2 Typical 7,433
Temperature coefficient -0.292 -0.290 Typical 6,056
Weight per kWp 56.5 51.4 Weak · bottom 18% 10,661
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

5 positive · 3 caution
Best for

Residential, commercial and shaded-installations.

Not ideal for

Weight-limited structures.

Watch-outs
56.5 kg per kWp

Bottom 18% of the TOPCon 400-450 W segment, against a median of 51.4.

What owners get
TOPCon M10R half-cut cells

The use of monocrystalline M10R half-cut cells with N-type TOPCon technology delivers lower power losses under partial shading and better high-temperature performance compared to older PERC technology, translating into higher real-world energy yield in rooftop installations.

Bifacial dual-glass design

The dual-glass bifacial construction captures additional energy from ground-reflected irradiance, increasing total system yield without expanding the installation footprint - a key advantage for space-constrained rooftop projects.

30-year linear power warranty

The manufacturer backs the series with a 30-year linear power output warranty, a benchmark standard for the premium tier-1 segment, giving investors predictable long-term returns on their investment.

Tier-1 bankable manufacturer with 13-year track record

RenewSys has operated since 2011 and holds tier-1 bankable status, easing project financing through banks and leasing institutions and reducing risk for smaller commercial investors.

Robust IP68 junction box and anodized frame

The IP68-rated junction box with three bypass diodes and an anodized aluminum frame provide resistance to hail and strong wind loads, important for rooftop installations exposed to harsh weather conditions.

Trade-offs
12-year product warranty below market trend

The 12-year product warranty is shorter than many tier-1 competitors in series launched after 2023, which increasingly offer 20-25 years of product warranty alongside a 30-year power warranty - this may affect perceived long-term service value of the module.

Efficiency slightly trails segment leaders in M10R 108D class

The maximum efficiency of 22.97% is marginally lower than comparable SunKean and Sunket New Energy models (SKT430~450M10-108D5) reaching 23.04% at the same 450 Wp max power - a small but measurable gap when selecting a module for highest power density.

Notes from the database
  • At 21.7% efficiency, this panel is on par with typical TOPCon 400-450W modules
  • At 216.9 W/m², this panel generates 3.2 W/m² less per unit area than TOPCon 400-450W median (220.2 W/m²)
  • Temperature coefficient of -0.29%/°C matches the TOPCon 400-450W median
  • At 24.0 kg (2.0 kg above TOPCon 400-450W median of 22.0 kg), requires checking roof load capacity
  • 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces

Specifications

Open datasheet PDF
Nominal power (Pmax) 425 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 21.70 % Typical Segment median 22.00%
Vmpp · Impp 31.18 V · 13.65 A Operating point at max power
Voc · Isc 37.89 V · 14.30 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1729×1133×35 mm · 1.96 m² of roof
Weight 24.0 kg Weak Weak · 2.0 kg above median
Cells 108 · TOPCon Monocrystalline
Bifaciality 80 % Rear output as a share of front
Coefficient Pmax -0.292 %/°C Typical median -0.290 of its segment
Coefficient Voc · Isc -0.276 · 0.057 %/°C
NOCT 45 °C At 800 W/m², 20 °C ambient
Product warranty 12 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs

Datasheet charts

Open datasheet PDF

Measured curves published by Renewsys in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 425 Wp appear here. The rest cover the whole series.

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-
With bifacial gain
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.292 %/°C against a segment median of -0.290
-
Bifacial gain
Rear gain over light concrete: -
-

Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.

Filter these
Size
Panel Power Eff. Temp. Weight Difference
Renewsys DESERV Extreme 108X-425 425 W 21.70% -0.292 24.0 kg You are here
SPR-MAX7-475 475 W 24.00% -0.270 21.1 kg +50 W, +2.3 pp, +10 yr warranty
JST-EDMH-(445-465)W-TD (465W class) 465 W 23.81% -0.300 20.5 kg +40 W, lighter, +2.1 pp
JAT54S40-475/LR 475 W 23.80% -0.260 19.3 kg +50 W, lighter, +2.1 pp
TWMNH-48HW475 475 W 23.80% -0.280 23.7 kg +50 W, cooler, +2.1 pp
CHSM48RN(DG)/F-BH-475 475 W 23.80% -0.290 24.5 kg +50 W, +2.1 pp
AIKO-A475-MCE54Mw 475 W 23.80% -0.260 21.0 kg +50 W, cooler, +2.1 pp
AIKO-A475-MAH54Mw 475 W 23.80% -0.260 21.5 kg +50 W, cooler, +2.1 pp
DESERV Extreme 108X-415 415 W 21.18% -0.292 24.0 kg -10 W, -0.5 pp
DESERV Extreme 108X-420 420 W 21.44% -0.292 24.0 kg -0.3 pp
DESERV Extreme 108X-430 430 W 21.95% -0.292 24.0 kg +0.2 pp
DESERV Extreme 108X-435 435 W 22.21% -0.292 24.0 kg +10 W, +0.5 pp
DESERV Extreme 108X-440 440 W 22.46% -0.292 24.0 kg +15 W, +0.8 pp
DESERV Extreme 108X-445 445 W 22.72% -0.292 24.0 kg +20 W, +1.0 pp
DESERV Extreme 108X-450 450 W 22.97% -0.292 24.0 kg +25 W, +1.3 pp
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +85 W, cooler, +3.3 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +70 W, cooler, +3.1 pp

Found 1786 panels of the same or similar size to this one, within ±10 mm. See them here Found 1924 panels of the same or similar size to this one, within ±25 mm. See them here Found 3392 panels of the same or similar size to this one, within ±50 mm. See them here Found 3970 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What is the maximum power output of the RenewSys DESERV Extreme 108X panels?
The DESERV Extreme 108X series reaches a maximum power output of up to 450 Wp. Thanks to monocrystalline M10R half-cut cells built on TOPCon technology combined with a bifacial design, the module delivers high power density in a relatively compact format, which matters when roof space is limited.
How does the TOPCon cell technology in the DESERV Extreme 108X differ from classic PERC cells?
The TOPCon cells in this series use an additional passivation layer, giving the module higher efficiency and lower power losses at high temperatures compared to traditional PERC panels. In practice, this means better energy yield during summer and slower power degradation over the long-term lifespan of the installation.
Do the bifacial DESERV Extreme 108X panels require special mounting to benefit from the dual-sided design?
To capture the additional energy gain from the rear side of the module, it's best to mount the panels on racking that raises them above the ground and over bright, reflective surfaces such as white gravel or high-albedo roofing. Standard pitched-roof mounting still works, but the bifacial gain will be more limited.
What warranty applies to the RenewSys DESERV Extreme 108X modules?
The manufacturer provides a 12-year product warranty along with a 30-year power output warranty. These are among the longer coverage periods on the market, offering greater investment security and a more predictable return on the installation over the long term.
Is the DESERV Extreme 108X suitable for smaller pitched-roof installations?
Yes, the series was designed mainly for residential rooftop and smaller commercial projects. Its compact module format combined with high energy yield allows efficient use of limited roof space, making it a solid choice for installers working on prosumer-scale systems.
Is the junction box on the DESERV Extreme 108X resistant to moisture and harsh weather conditions?
Yes, the module features an IP68-rated junction box with three bypass diodes, providing strong resistance to moisture, dust, and contamination. Combined with an anodized aluminum frame, the panel is built to withstand harsh conditions, including strong wind and hail.
Add to compare