Space saver, no clear weak spot
The Renesola 210M Split Cell series is designed for high energy production under real-world conditions, including partial shading, dirt accumulation, and variable weather. Thanks to the split cell technology, the current flows through a shorter path, reducing losses and helping to maintain the stability of the module chain even when part of the installation is operating less efficiently. The design incorporates a multi-busbar connection system (MBB), which improves current collection and increases resistance to micro-cracks, which is important for installation on roofs and ground-mounted structures.
In practice, this means higher yields in the morning and evening, as well as better tolerance for less-than-ideal installation conditions. These modules are a good choice for residential and commercial installations where predictability and investment returns are important. The Renesola 210M Split Cell stands out for its improved performance in low-light conditions and enhanced electrical reliability, which differentiates it significantly from many standard full-cell panels available on the market.
Ranking
Signals from the data
Residential, commercial and shaded-installations.
Top 12% of the 50-250 W band, against a median of 159.2.
Top 13% of the 50-250 W band, against a median of 15.96%.
Top 14% of the 50-250 W band, against a median of 70.3.
Renesola provides 30 years of both product and power output warranty - significantly longer than the industry-standard 10-12 years of product warranty and 25 years of power warranty offered by most manufacturers in this module class.
The use of TOPCon technology instead of older PERC results in lower LID/LeTID degradation and better high-temperature performance, translating into real annual energy yield gains compared to modules built on P-type cells.
Split cells shorten the current path, reducing losses under partial shading, while the multi-busbar (MBB) interconnection improves current collection and increases resistance to microcracks - important for roofs with variable exposure.
At 19.53% efficiency, the module outperforms comparable 150Wp panels from SunEvo Solar (18.94%) and Top Solar (18.6%) by 0.6-0.9 percentage points, yielding more energy per unit of installed area.
ReneSola has been operating since 2005 and has repeatedly appeared on the Bloomberg NEF Tier 1 list (including Q1 2026), confirming manufacturing experience and a global delivery track record.
While ReneSola was on the BNEF Tier 1 list in Q1 2026, reports from Q3 2026 indicate the manufacturer dropped off the list, reportedly for failing to meet financial or documentation requirements - a factor lenders may weigh when assessing the series' bankability.
The series is available in a single power variant (150Wp), limiting its use to niche, portable, or off-grid applications rather than typical rooftop or utility-scale installations, which commonly use 400-600+ Wp modules.
- At 19.5% efficiency, this panel is 3.5pp above typical TOPCon 0-400W modules (median: 16.0%)
- 195.3 W/m² power density - 35.5 W/m² more than TOPCon 0-400W median (159.8 W/m²), more power per roof area
- At -0.34%/°C, loses 0.05pp more power per degree than TOPCon 0-400W median (-0.29%/°C)
- Weight of 8.1 kg (15.4 kg below TOPCon 0-400W median of 23.5 kg) allows easier transport and roof mounting
- #12653 for efficiency, #8778 for temperature performance out of 14005 panels
Specifications
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Found 2 panels of the same or similar size to this one, within ±10 mm. See them here Found 2 panels of the same or similar size to this one, within ±25 mm. See them here Found 3 panels of the same or similar size to this one, within ±50 mm. See them here Found 6 panels of the same or similar size to this one, within ±100 mm. See them here