Middle of its segment, weak in heat
The RedSolar N series comprises bifacial modules built on TOPCon technology and rectangular G12R cells, combining high power density with reduced losses under partial shading. The multi-busbar (MBB) structure improves current collection and lowers the risk of microcracks, helping the panels maintain stable output over their entire service life. The bifacial double-glass design captures light reflected from the ground, meaningfully boosting energy yield without expanding the footprint of the installation - a feature especially valuable for solar farms and industrial rooftops, where every extra watt matters. PID-resistant construction and a low linear power decline make the N series a solid choice for investors focused on predictable long-term returns. This quality is backed by a 30-year linear power warranty along with a 12-year product warranty, while CE, ISO, and MCS certifications confirm compliance with international standards. These panels suit installers and commercial project developers who demand high durability and minimal service risk while maximizing output from available mounting space.
Ranking
Signals from the data
Residential and commercial.
Hot climates.
Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290.
RedSolar guarantees a minimum of 87.4% of nominal power after 30 years of operation, exceeding the industry-typical standard (25 years / 84.8%) offered by many tier-1 manufacturers. This means a genuinely lower annual power degradation over the module's full service life.
The use of rectangular G12R N-type TOPCon cells combined with a multi-busbar (MBB) grid reduces losses under partial shading and lowers the risk of microcracks, resulting in more stable performance parameters compared to older PERC cells.
The bifacial construction with double glass (2 mm) captures light reflected off the ground without increasing the installed footprint, which is particularly valuable on bright industrial rooftops or ground-mounted PV farms.
Efficiency of up to 22.77% matches the LEDVANCE M435~455N54LB-SF-F7 module and is only marginally below the Sunlike Solar SKT420~455M10-108D6 (22.8%), placing the N series among the top-tier comparable modules in the 435-455 Wp range.
A Pmax temperature coefficient of -0.3%/°C outperforms the typical -0.35%/°C found in competing PERC modules, meaning lower power losses at high operating temperatures on roofs or PV farms.
Available sources (including the ENF Solar datasheet aggregator) provide no independent verification of RedSolar's Tier-1 manufacturer status or third-party lab test results (e.g., PVEL, TÜV), unlike well-established brands in the peer comparable set such as LEDVANCE. This may require additional due diligence for bank-financed commercial projects.
- At 22.8% efficiency, this panel is on par with typical TOPCon 450-500W modules
- At 227.7 W/m² power density, roof space requirements are typical for TOPCon 450-500W panels
- At -0.30%/°C, hot weather performance is typical for TOPCon 450-500W panels
- In the top 22% for efficiency among all TOPCon panels
Specifications
Datasheet charts
Measured curves published by RedSolar in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 455 Wp appear here. The rest cover the whole series.
Simulations
Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.
Model: bifaciality × albedo × 0.6 view factor. A first-order estimate, not a yield simulation.
Alternatives
Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here