Skip to main content
Recom RCM-460-RNAA
Recom Brand review

RCM-460-RNAA

460 Wp TOPCon
ComparePV verdict

Light for its output, no clear weak spot

Rank 4,139 of 14,005
Compare panels Datasheet PDF
Power (Wp)
460
Typical for its class
Efficiency (%)
23.02
Strong · top 17%
Density (Wp/m²)
230.2
Strong · top 20%
Temp (%/°C)
-0.280
Strong · top 11%
Weight (kg)
21.0
Strong · 3.0 kg below median
Warranty (yrs)
30
Typical · median 30 yrs

The Recom Lynx series consists of modules based on N-type TOPCon cells, designed for high efficiency and stable performance over long periods. A key advantage is minimal LID degradation and the absence of LeTID risk, which translates directly into more predictable energy production throughout the entire lifespan of the installation. In practice, this means fewer disappointments after several seasons and a better return on investment - especially in situations where long-term performance is critical.

The Lynx series is available in mono- and bi-facial versions, including a double-sided (glass-glass) construction, which enhances resistance to weather conditions and mechanical loads. Thanks to its bi-facial design, the module can utilize reflected light from the ground, improving efficiency without increasing the surface area. This makes it a good choice for PV farms, commercial and industrial rooftops, and demanding prosumers who require low temperature coefficients and high performance in hot weather. Furthermore, the series is supported by a long warranty, which simplifies cost and risk planning for the project.

Ranking

1,089 panels in the segment TOPCon 450-500 W
Metric This panel Median Position in segment Overall rank
Module efficiency 23.02% 22.52% Strong · top 17% 1,797
Power density 230.2 225.2 Strong · top 20% 1,876
Temperature coefficient -0.280 -0.290 Strong · top 11% 1,309
Weight per kWp 45.7 52.2 Strong · top 11% 805
Performance warranty 30 yrs 30 yrs Typical 21
Colour key Strong - top 25% Typical - middle 50% Weak - bottom 25%

Signals from the data

8 positive · 2 caution
Best for

Utility-scale, commercial and hot-climate.

Strengths
45.7 kg per kWp

Top 11% of the TOPCon 450-500 W segment, against a median of 52.2.

-0.280 %/°C temperature coefficient

Top 11% of the TOPCon 450-500 W segment, against a median of -0.290.

23.02% module efficiency

Top 17% of the TOPCon 450-500 W segment, against a median of 22.52%.

What owners get
N-type TOPCon cell technology

N-type TOPCon cells exhibit negligible LID degradation and no LeTID risk, and combined with up to 23.5% efficiency deliver a more predictable and stable energy yield throughout the system's operating life.

30-year linear power warranty

The manufacturer guarantees at least 87.4% of nominal power retained after 30 years, backed by a 30-year product warranty - well above the market-standard 25 years, simplifying long-term project risk and cost planning.

Efficiency on par with segment leaders

The 23.5% peak efficiency matches the best comparable series, such as Huasun Himalaya V-ocean and Phono Solar Monocrystalline132/Helios, which reach the same 23.5% at the same maximum power of 730 Wp.

Wide power range of 440-730 Wp

A 33-variant portfolio spanning 440 to 730 Wp allows the right module to be selected for both C&I rooftops and utility-scale PV farms without switching suppliers.

Glass-glass variant for added durability

The double-glass construction available in the series improves mechanical and weather resistance, reducing the risk of microcracking and laminate degradation over the long term, consistent with the 30-year product warranty.

Trade-offs
No current Tier-1 (bankability) status

Recom achieved BNEF Tier 1 status back in 2019, but according to current data the manufacturer is not presently classified as tier-1 bankable, which can complicate project financing for banks and funds screening suppliers against the current BNEF list.

Base series lacks bifacial gain

The flagship Lynx specification indicates a monofacial module, while a direct competitor at the same power and efficiency (Huasun Himalaya V-ocean, 730 Wp/23.5%) offers a bifacial construction with additional rear-side yield - in ground-mount farm applications this means forgoing a potential energy gain of several percent.

Notes from the database
  • At 23.0% efficiency, this panel is on par with typical TOPCon 450-500W modules
  • 230.2 W/m² power density - 5.0 W/m² more than TOPCon 450-500W median (225.2 W/m²), more power per roof area
  • At -0.28%/°C, hot weather performance is typical for TOPCon 450-500W panels
  • Weight of 21.0 kg (3.0 kg below TOPCon 450-500W median of 24.0 kg) allows easier transport and roof mounting
  • #1797 for efficiency, #1309 for temperature performance out of 14005 panels

Specifications

Open datasheet PDF
Nominal power (Pmax) 460 Wp Nameplate at 1000 W/m², 25 °C
Module efficiency 23.02 % Strong Segment median 22.52%
Vmpp · Impp 30.10 V · 15.29 A Operating point at max power
Voc · Isc 35.90 V · 16.17 A Sizes the string length
Max system voltage 1500 V Longer strings than 1000 V modules
Dimensions 1762×1134×30 mm · 2.00 m² of roof
Weight 21.0 kg Strong Strong · 3.0 kg below median
Cells 96 · TOPCon Monocrystalline
Coefficient Pmax -0.280 %/°C Strong top 11% of its segment
Coefficient Voc · Isc -0.230 · 0.045 %/°C
NOCT 44 °C At 800 W/m², 20 °C ambient
Product warranty 30 years Hardware defects only
Performance warranty 30 years Typical median 30 yrs · median 30 yrs
End-of-warranty output 86.0 % Equals 395 W guaranteed
Degradation 1.00 → 0.45 % First year, then annual

Datasheet charts

Open datasheet PDF

Measured curves published by Recom in this model's datasheet. A chart carrying a wattage was measured on that variant alone - only the ones that describe 460 Wp appear here. The rest cover the whole series.

I-V Curve I-V Curve Whole series

Simulations

Live - change any input
Lifetime output & value
30 years at 1200 kWh/kWp/year and €0.50 per kWh
Power in year 30
-
Lifetime energy
-
Energy value
-

Degradation from this panel's own datasheet figures. No inverter, soiling or shading losses.

Heat losses
-0.280 %/°C against a segment median of -0.290
-
Filter these
Size
Panel Power Eff. Temp. Weight Difference
Recom RCM-460-RNAA 460 W 23.02% -0.280 21.0 kg You are here
LR7-54HJD-510M 510 W 25.00% -0.240 23.5 kg +50 W, cooler, +2.0 pp
AIKO-A495-MCE54Mw 495 W 24.80% -0.260 21.0 kg +35 W, cooler, +1.8 pp
LR7-54HJD-505M 505 W 24.70% -0.240 23.5 kg +45 W, cooler, +1.7 pp
AIKO-A490-MCE54Mw 490 W 24.50% -0.260 21.0 kg +30 W, cooler, +1.5 pp
LR7-54HJD-500M 500 W 24.50% -0.240 23.5 kg +40 W, cooler, +1.5 pp
CIPRO-TN9C54M-500W 500 W 24.50% -0.260 21.4 kg +40 W, cooler, +1.5 pp
RCM-440-RDBNAA (Lynx series) 440 W 22.02% -0.280 25.0 kg -20 W, heavier, -1.0 pp
RCM-445-RDBNAA 445 W 22.27% -0.280 21.0 kg -15 W, -0.8 pp
RCM-450-RDBNAA 450 W 22.52% -0.280 21.0 kg -10 W, -0.5 pp

Found 1395 panels of the same or similar size to this one, within ±10 mm. See them here Found 1425 panels of the same or similar size to this one, within ±25 mm. See them here Found 3614 panels of the same or similar size to this one, within ±50 mm. See them here Found 3962 panels of the same or similar size to this one, within ±100 mm. See them here

Common questions

6 answered
What warranty does the Recom Lynx series come with and what does it cover?
The Recom Lynx series includes a 30-year product warranty and a 30-year linear power output guarantee. At the end of the warranty period, the module must retain at least 87.4% of its nominal power. For a 730 Wp panel, that means a guaranteed minimum of approximately 637 W after three decades of operation — one of the longer warranty commitments on the market and a meaningful factor when calculating project LCOE.
What is TOPCon technology and why does the Recom Lynx series use it?
TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell technology that uses a thin tunnel oxide layer to suppress carrier recombination. The result is higher module efficiency and virtually no LID (Light Induced Degradation) or LeTID risk compared to conventional PERC cells. In practice, Recom Lynx panels lose less power in the first seasons of operation and deliver more predictable energy output over their entire service life.
Are Recom Lynx panels a good fit for large-scale solar farms and commercial or industrial rooftops?
Yes. The Lynx series reaches up to 730 Wp per module, placing it squarely in the large-format segment suited for utility-scale PV farms and C&I installations. Higher per-module power reduces the number of panels needed for a given capacity, lowering BoS costs and installation labor. The series is also available in bifacial glass-glass variants that capture reflected irradiance and further improve overall energy yield.
How does the Recom Lynx series handle temperature losses during hot summer days?
The N-type TOPCon cells used in the Lynx series have a lower power temperature coefficient than conventional PERC cells. This means smaller power losses when module temperatures are high — a common condition on sun-exposed rooftops and ground-mounted arrays during summer. For installations in warm climates or on dark roofing materials, this translates into a measurably better annual energy yield compared to older PERC-based modules.
Is Recom a reliable manufacturer and is the Lynx series still available?
Recom Technologies is an Italian-headquartered manufacturer that continues to actively develop the Lynx line — the latest models exceed 720 Wp at efficiencies above 23%. The company is not currently listed on major Tier 1 agency rankings, but the Lynx series remains in active production and is commercially available. When purchasing, it is worth verifying local distributor warranty support as an additional safeguard for your investment.
How does the Recom Lynx series differ from PERC-based modules?
The key distinction is N-type TOPCon cells versus the more common P-type PERC architecture. N-type cells do not exhibit LID or LeTID, which can reduce PERC module output by a few percent within the first months of operation. Lynx modules also achieve higher efficiency for the same footprint, making them a strong choice wherever roof or land area is constrained and maximizing yield per square meter is a priority.
Add to compare